|
Log in to post
|
Print Thread |
|
|
|
|
|
Band-in-a-Box for Windows
|
Joined: May 2007
Posts: 101
Apprentice
|
OP
Apprentice
Joined: May 2007
Posts: 101 |
Has anyone successfully used the LoopBe1 virtual midi cable program to send an extra midi signal to a synthesizer or harmonizer while using realtreacks and coyote in biab? I need help with settings. Midi/Audio driver setup recognizes that it is there and I have it set as midi in/ midi out. I have dxi checked (also tried without). I have biab setting for "vocalist" (ch5) and have set my vocalist pro to ch5 and "all" but no midi signal to the harmonizer so far. Any suggestions?  Mike
|
|
|
|
|
|
|
|
|
|
|
|
|
Band-in-a-Box for Windows
|
Joined: Mar 2008
Posts: 791
PG Music Staff
|
|
PG Music Staff
Joined: Mar 2008
Posts: 791 |
The LoopBe1 driver should not be selected for both In and Out. This will cause MIDI feedback. I believe it has a fail-safe that mutes the driver if it detects MIDI feedback, so that could be what is going on.
If you are using the driver for output, then you need another program to use it as input. For example, PowerTracks or RealBand could receive MIDI signals and play out through a DXi synth.
If the Vocalist is hardware, then the LoopBe1 driver would not be necessary. In that case their should be some kind of output driver available in the Band-in-a-Box MIDI output driver list.
Blake
PG Music Inc.
|
|
|
|
|
|
|
|
|
|
|
|
|
Band-in-a-Box for Windows
|
Joined: May 2007
Posts: 101
Apprentice
|
|
OP
Apprentice
Joined: May 2007
Posts: 101 |
Thanks Blake, but that is my problem. BIAB does not support multiple midi and therefore when playing realtracks you can't use another piece of midi hardware like the vocalist. That's why if I want midi instruments playing along side my realtracks I have to use the dxi setting (coyote) and it will not send a separate midi signal out using this configuration.
|
|
|
|
|
|
|
|
|
|
|
|
|
Band-in-a-Box for Windows
|
Joined: May 2003
Posts: 8,021
Veteran
|
|
Veteran
Joined: May 2003
Posts: 8,021 |
I don't have LoopBe1 but I've used MIDI YOKE. It's a virtual cable as well.You can have up to 16 virtual cables. You need only one.So here's what you do assuming your soundcard is OK with it. It should be.
1. Use midi yoke 1 as your output driver in BIAB
2. In your host program use midiyoke as your input driver for as many tracks as you need.And assign the approprite channels for those tracks that coincide with the BIAB instrument channels
3. assign each of those tracks to a particular DXi/VSTi
4. Route the audio from those DXi/VSTi to your sound card.
5. In BIAB route the audio to your sound card.RTs & RDs
6. In BIAB go to :OPT./PREFS/output channel
7. In this screen check off "output chords" as set up it'll output basic chords on channel 5.
8. In the host again set a track to receive midiyoke 1 on channel 5
9. set this track to output to your hardware midi interface that is plugged into the midi in of your Vocalist
10. Make sure the Vocalist is set to receive the chord info on channel 5.
This is how I did it in the olden days. Hope this helps.
|
|
|
|
|
|
|
|
|
|
|
|
|
Band-in-a-Box for Windows
|
Joined: Sep 2003
Posts: 8,333
Veteran
|
|
Veteran
Joined: Sep 2003
Posts: 8,333 |
I'd get the midi out working first.
I clean out the soloist part.
I change the solo part to Midi ch 5
I set the output chords to Midi ch 5
You should just be able to plug a usb to midi cable into the computer, plug it into the harmonizer and it should work.
On my harmonizer there are presets numbered 1.1 to 9.9
If I embed using f5 at bar 1 a 32 it will set the harmonizer to 3.2 so you can change from one harmony to another on the fly.
I would the the above working, and set Midi out (No in yet) in Opts Prefs Midi Driver
I'd use all Realtracks and watch to see my box work on harmonies.
Once you get that working you can decide if you want to try going back in and using the Dxi, I have not tried that as I use a Ketron or My Jv1010.
I think one step at a time is best, like I said no midi plugged back in.
Once you get that to work I'd simply try clicking on the Dxi and see if the soloist track is still firing midi out on ch 5.
John Conley
Musica est vita
|
|
|
|
|
|
|
|
|
|
|
|
|
Band-in-a-Box for Windows
|
Joined: May 2007
Posts: 101
Apprentice
|
|
OP
Apprentice
Joined: May 2007
Posts: 101 |
Thanks guys, but still no joy. I'll try again tomorrow. BIAB does list my vocalist pro (usb) under midi outs, so if I choose that and not select dxi it will get me through tonight's gig with my midi harmony. I'll just have to stick with songs that only use real tracks (or take the time to change the midi options for the songs with both realtracks and midi).
I really appreciate you taking the time to help!
Mike
|
|
|
|
|
|
|
|
|
|
|
|
|
Band-in-a-Box for Windows
|
Joined: Apr 2005
Posts: 500
Journeyman
|
|
Journeyman
Joined: Apr 2005
Posts: 500 |
I'm responding to this old thread-wanting to use BIAB with midi tracks and an external harmonizer.
1. It seems 32 bit midi yoke won't support my 64 bit Iconnectivity MIO...which is a USB to midi converter and supplies the signal to the harmony machine. So I must look elsewhere
2. The choices are loopbe1 ..... or midiloop software by Tobias Erichsen
Anyone have experience with either for supplying multiple midi outs?
Thanks-
|
|
|
|
|
|
|
|
|
|
|
|
|
Band-in-a-Box for Windows
|
Joined: Dec 2000
Posts: 12,674
Veteran
|
|
Veteran
Joined: Dec 2000
Posts: 12,674 |
LoopBE works fine on 32-bit and 64-bit Windows; however, I would suggesting buying LoopBE30, which gives you up to 30 virtual MIDI in/out ports for $19.90.
I have used it with, for example, Noteworthy Composer (which doesn't support DXi or VSTi synths) by sending MIDI data out to LoopBe and then configuring a standalone synth to receive data from LoopBE.
John Laptop-HP Omen I7 Win11Pro 32GB 2x2TB, 1x4TB SSD Desktop-ASUS-I7 Win10Pro 32GB 2x1.5TB, 2x2TB, 1x4TB SATA BB2025/UMC404HD/Casios/Cakewalk/Reaper/Studio One/MixBus/Notion/Finale/Dorico/Noteworthy/NI/Halion/IK http://www.sus4chord.com
|
|
|
|
|
|
|
|
|
|
|
|
|
Band-in-a-Box for Windows
|
Joined: Apr 2005
Posts: 500
Journeyman
|
|
Journeyman
Joined: Apr 2005
Posts: 500 |
John-
One external midi channel is sufficient for me. But I have a question:
Since the BIAB "Route all DXI/VST" checkbox now doesn't make sense, will LoopBe offer synth options? In other words what will be the NEW order of midi routing, and how will that interface with BIAB?
Looking at the posts above, i believe "Silvertones" addressing of MidiYoke...will likely apply to LoopBE. You choose it as your output device, check "Route DXI/VST" to a Coyote, etc...... specify a midi channel in Output Chords...and let LoopBE assign that channel to my MIO - USB to Midi hardware converter.
I'll wait till you weigh in on this before the install, John. Thanks as usual for your giving and comprehensive attention.
Dan
|
|
|
|
|
|
|
|
|
|
|
|
|
Band-in-a-Box for Windows
|
Joined: Dec 2000
Posts: 12,674
Veteran
|
|
Veteran
Joined: Dec 2000
Posts: 12,674 |
I believe that is correct, but it's free and easily installed/uninstalled. Just give it a try and you should have your answer in about five minutes. And it doesn't hurt to have it installed. It just adds another MIDI port to your system.
John Laptop-HP Omen I7 Win11Pro 32GB 2x2TB, 1x4TB SSD Desktop-ASUS-I7 Win10Pro 32GB 2x1.5TB, 2x2TB, 1x4TB SATA BB2025/UMC404HD/Casios/Cakewalk/Reaper/Studio One/MixBus/Notion/Finale/Dorico/Noteworthy/NI/Halion/IK http://www.sus4chord.com
|
|
|
|
|
|
|
|
|
|
|
|
|
Band-in-a-Box for Windows
|
Joined: Apr 2005
Posts: 500
Journeyman
|
|
Journeyman
Joined: Apr 2005
Posts: 500 |
Well...... LoopBe1 is installed but nothing is happening. I click on the tray icon or in Programs, and no midi or monitor window comes up..... just the mute screen. I would happily purchase the 8 port version if it does work. I'm now awaiting a response from the creator.....though a bit skeptical at the moment. And others online have recently expressed difficulty. We'll see
|
|
|
|
|
|
|
|
|
|
|
|
|
Band-in-a-Box for Windows
|
Joined: Apr 2005
Posts: 500
Journeyman
|
|
Journeyman
Joined: Apr 2005
Posts: 500 |
O.k. here's the story......LoopBe1 does NOT offer one additional port...it's ONLY one port, so useless for a second midi out in BIAB. I would install LoopBe30- there's a trial. But some user notes first, would be helpful- I don't want to open a midi can of worms. There's another thread about this on the forum. I'll look there.
|
|
|
|
|
|
|
|
|
|
|
|
|
Band-in-a-Box for Windows
|
Joined: Dec 2000
Posts: 12,674
Veteran
|
|
Veteran
Joined: Dec 2000
Posts: 12,674 |
That's why it's called LoopBe1, because it's only one port. LoopBE30 is up to 30 ports, but you decide how many you want installed (default is two).
I've had it on my computers for about a decade now and it has never caused problems and has always worked. The only thing to be careful of is to not inadvertently set up a MIDI feedback loop.
And you can just try the trial version. The trial version of LoopBe30 works for 60 minutes after its first use. After every reboot, it will work again for an additional 60 minutes. As I said in the previous post, it is also easily uninstalled if you don't want to use it.
John Laptop-HP Omen I7 Win11Pro 32GB 2x2TB, 1x4TB SSD Desktop-ASUS-I7 Win10Pro 32GB 2x1.5TB, 2x2TB, 1x4TB SATA BB2025/UMC404HD/Casios/Cakewalk/Reaper/Studio One/MixBus/Notion/Finale/Dorico/Noteworthy/NI/Halion/IK http://www.sus4chord.com
|
|
|
|
|
|
|
|
|
|
|
|
|
Band-in-a-Box for Windows
|
Joined: Jun 2000
Posts: 2,494
Veteran
|
|
Veteran
Joined: Jun 2000
Posts: 2,494 |
First here is some reading that may help with what you are trying to do http://bandinabox.wikia.com/wiki/Accessing_Multiple_Midi_PortsSecond, I seem to have lost the bubble on this how many outputs that you want BIAB to eventuality feed, sounds like at LEAST two? If yes then you are correct Loopbe 1 BY ITSELF won't help, (see above) – and John already said that (but stand by). Also if yes, besides a multi-port driver you will ALSO need something like MIDI OX (you knew that right?) if trying to go DIRECT form BIAB OUT to your i Connectivity port. You COULD take BIAB OUTPUT via MIDI Yoke, Loopbe 1, or Loopbe 30 into ANOTHER DAW or standalone VSTi (that has with ability to send MIDI out) and THEN using that DAW/VSTI (as a patch bay) route its MIDI thru or OUT to your iConnectivity port. Yes I saw you already said MIDI Yoke didn't work (more later). I have and do USE BOTH MIDI Yoke and LoopBe 30, I have and do use MIDI Yoke with a 64-bit Yamaha USB MIDI for my Montage 7 and my Fishman Triple Play (installed using its 64 bit drivers) Like you and John said Loopbe30 has a trial, TRY IT - it won't hurt anything. Now about MIDI Yoke: I’m not doubting you have issues but MIDI Yoke SHOULD work fine with your iConnectivity so not sure why you are having issues?? Even if you know this I’ll mention for others who may not know . You need to route BIAB MIDI OUT to a MIDI Yoke port (#1, # 2, #3, … or #8) THEN use MIDI OX (or similar or another DAW) to connect that single MIDI Yoke port to the multiple MIDI IN’s your trying to drive. And if not using MIDI Ox you are using a a similar "software patch bay" or a DAW that can route MIDI ins to one or more MIDI outs And if having trouble installing MIDI Yoke in Win 10 https://www.youtube.com/watch?v=kORFzILrdmABTW the single Loopbe1 port would work just as well in conjunction with MIDI OX as a single port of MIDI Yoke =================== Next just me rambling A MIDI port is a MIDI port as far as the OS (or MIDI) is concerned. Again, I use MIDI YOKE/OX with the 64-bit "drivers" for Yamaha USB support for use to/from a Montage 7 while also using my Fishman Triple Play (and its 64-bit driver) to other VSTi's and DAWS for recording/playing and routing. The iConnectivty uses a "run of the mill" USB 2 interface (it is backward compatible to 1.1 and the whole thing peice of HW is backward compatible to Win XP SP3 - which is ONLY 32 bit) the iConnectivty MIDI input (if designed to MIDI spec) is listening for a handshake and data from ANY MIDI input source it cannot tell if the handshake and data at its "input" was generated using 32 software, 64 bit software, or another piece of dedicated MIDI hardware, which is independent of ANY OS The MIDI Protocol is only 8-bit; furthermore, MIDI data itself is only 7 bits since one bit is a STATUS bit (7 bits can represent 128 things) good luck Larry
Last edited by Larry Kehl; 02/12/18 10:06 AM.
Win10Pro,i9,64GB,2TBSSD+20TBHDDs,1080TI,BIAB'24,Scarlett18i8,Montage7,Fusion 8HD,QS8,Integra7,XV5080,QSR,SC-8850,SPLAT,FL21&others,Komp.14,IK suite&others, just a guitar player-AXE FX III &FM9T, FishmanTP, MIDIGuitar2, GK2/3'sw/GI20
|
|
|
|
|
|
|
|
|
|
|
|
|
Band-in-a-Box for Windows
|
Joined: Feb 2015
Posts: 7,954
Veteran
|
|
Veteran
Joined: Feb 2015
Posts: 7,954 |
Thanks guys, but still no joy. I'll try again tomorrow. BIAB does list my vocalist pro (usb) under midi outs, so if I choose that and not select dxi it will get me through tonight's gig with my midi harmony. I'll just have to stick with songs that only use real tracks (or take the time to change the midi options for the songs with both realtracks and midi).
I really appreciate you taking the time to help!
Mike LoopMidi is better than LoopBe (LoopBe tends to mute itself), it's free and can set many ports. Is it the midi chords you want to send to vocal pro ? If so then in Options > Prefs > Output chords enable Chord Types Channel Ticks before 0 or early ? Write track to midi file. Save Midi > file on disk File > Import > Melody or Soloist from Midi file Import saved midi and same channel only Load midiOut into that track and set it to the usb hardware device or LoopBe or MidiLoop.
|
|
|
|
|
|
|
|
|
|
|
|
|
Band-in-a-Box for Windows
|
Joined: Apr 2005
Posts: 500
Journeyman
|
|
Journeyman
Joined: Apr 2005
Posts: 500 |
Larry-
You didn't ramble a bit, and gave me a most generous answer. Thanks so much. With a Windows 7 machine and a Yamaha 144 sound module, I never had an audio or midi issue. Also, Midi Ox/Yoke was my religion during a long, XP tenure. But things changed this weekend.
I suddenly got the whim to pull out my old Helicon Voice Live, and while many Ox/Yoke 64 bit postings seemed discouraging, I took the Ox plunge. But after installation....more posts made me second guess this, and I uninstalled Ox.
The moment of grief arrived after that uninstall, Larry....when BIAB suddenly would play nothing without a yellow error message that there is no Audio driver present in Windows. The message would disappear, and the program would then play. But how an OX uninstall could corrupt my Yamaha 144 audio driver was a mystery. Other audio apps gave the same message. So I tried to reinstall my Yamaha audio driver..... and that FAILED ...saying 'Please telephone the company' A system restore to the pre-OX state brought things back in line. But as the Chinese say, "Once bitten by a snake, for 10 years you're even afraid of a rope"
My second venture of this past weekend involved LoopBe, but emails to creator Daniel Schmidtt, failed to garner help. So in light of your vast knowledge on these specific subjects, I guess you're my guide on 64 bit BIAB midi.
If there is an Ox version other than the latest standard 896 KB version whose uninstall somehow corrupted my Yamaha audio driver, please point the way. And if Yoke and OX still work as efficiently ina 64 bit system as you claim, there's no need for LoopBe at all. Any insights would be helpful. Thanks again.
|
|
|
|
|
|
|
|
|
|
|
|
|
Band-in-a-Box for Windows
|
Joined: Jun 2000
Posts: 2,494
Veteran
|
|
Veteran
Joined: Jun 2000
Posts: 2,494 |
Don't know what to tell you. So try Pipeline's Loopmidi
I'll now ALSO try LoopMIDI just for grins(thanks Pipeline!) .
but as an FYI I am NOT running Win 10 version 1709 (aka fall creators edition) - so maybe....???
I'm still on last springs version (1703) and will SKIP 1709 completely (and may even skip next one version 1803 coming VERY soon to a PC near you) - depending on what the Win 10 Home users (AKA guinea pig's or uncompensated beta testers) report as issues.
Larry
Win10Pro,i9,64GB,2TBSSD+20TBHDDs,1080TI,BIAB'24,Scarlett18i8,Montage7,Fusion 8HD,QS8,Integra7,XV5080,QSR,SC-8850,SPLAT,FL21&others,Komp.14,IK suite&others, just a guitar player-AXE FX III &FM9T, FishmanTP, MIDIGuitar2, GK2/3'sw/GI20
|
|
|
|
|
|
|
|
|
|
|
|
|
Band-in-a-Box for Windows
|
Joined: Apr 2005
Posts: 500
Journeyman
|
|
Journeyman
Joined: Apr 2005
Posts: 500 |
Pipeline's method of just using Real Tracks is what I've been doing until a more viable solution materializes. Yes, ....I currently output chords to the IConnectivity MIO...my selected midi output driver that gives chord info to the Helicon Voice Live But this forces me to solely use Real Tracks. PG support says the idea of multiple MIDI drivers has been bandied about by the developers for years, but since the vast majority of users prefer Real Tracks exclusively, midi is a dinosaur.
Personally, I couldn't disagree more. From stride piano to cha cha backgrounds, I find that to this day,a mix of midi and Real....often provide the most satisfying tracks.
Perhaps someone will offer a safe, easy, and definitive workaround for achieving multiple MIDI outputs in BIAB.
And Pipeline, ....does LoopMidi actually work here without a need for midi ox to distribute the midi? If so, and if it integrates easily, please share a bit more about this. Hard to tell from your post if it actually achieves multiple MIDI without complication in BIAB. Thanks.
|
|
|
|
|
|
|
|
|
|
|
|
|
Band-in-a-Box for Windows
|
Joined: Apr 2005
Posts: 500
Journeyman
|
|
Journeyman
Joined: Apr 2005
Posts: 500 |
And just in csse the developers are listening, the fix for this issue seems simple..... Put 1 more entry into OUTPUT CHORDS.....a dropdown that reads
MIDI DRIVER FOR OUTPUT CHORDS
|
|
|
|
|
|
|
|
|
|
|
|
|
Band-in-a-Box for Windows
|
Joined: Feb 2015
Posts: 7,954
Veteran
|
|
Veteran
Joined: Feb 2015
Posts: 7,954 |
|
|
|
|
|
|
|
|
|
|
|
|
Ask sales and support questions about Band-in-a-Box using natural language.
ChatPG's knowledge base includes the full Band-in-a-Box User Manual and sales information from the website.
|
|
|
|
|
|
|
|
|
|
|
New RealTracks Released with Band-in-a-Box 2025!
We’ve expanded the Band-in-a-Box® RealTracks library with 202 incredible new RealTracks (in sets 449-467) across Jazz, Blues, Funk, World, Pop, Rock, Country, Americana, and Praise & Worship—featuring your most requested styles!
Jazz, Blues & World (Sets 449–455):
These RealTracks includes “Soul Jazz” with Neil Swainson (bass), Mike Clark (drums), Charles Treadway (organ), Miles Black (piano), and Brent Mason (guitar). Enjoy “Requested ’60s” jazz, classic acoustic blues with Colin Linden, and more of our popular 2-handed piano soloing. Plus, a RealTracks first—Tango with bandoneon, recorded in Argentina!
Rock & Pop (Sets 456–461):
This collection includes Disco, slap bass ‘70s/‘80s pop, modern and ‘80s metal with Andy Wood, and a unique “Songwriter Potpourri” featuring Chinese folk instruments, piano, banjo, and more. You’ll also find a muted electric guitar style (a RealTracks first!) and “Producer Layered Guitar” styles for slick "produced" sound.
Country, Americana & Praise (Sets 462–467):
We’ve added new RealTracks across bro country, Americana, praise & worship, vintage country, and songwriter piano. Highlights include Brent Mason (electric guitar), Eddie Bayers (drums), Doug Jernigan (pedal steel), John Jarvis (piano), Glen Duncan (banjo, mandolin & fiddle), Mike Harrison (electric bass) and more—offering everything from modern sounds to heartfelt Americana styles
Check out all the 202 New RealTracks (in sets 456-467)
And, if you are looking for more, the 2025 49-PAK (for $49) includes an additional 20 RealTracks with exciting new sounds and genre-spanning styles. Enjoy RealTracks firsts like Chinese instruments (guzheng & dizi), the bandoneon in an authentic Argentine tango trio, and the classic “tic-tac” baritone guitar for vintage country.
You’ll also get slick ’80s metal guitar from Andy Wood, modern metal with guitarist Nico Santora, bass player Nick Schendzielos, and drummer Aaron Stechauner, more praise & worship, indie-folk, modern/bro country with Brent Mason, and “Songwriter Americana” with Johnny Hiland.
Plus, enjoy user-requested styles like Soul Jazz RealDrums, fast Celtic Strathspey guitar, and Chill Hop piano & drums!
The 2025 49-PAK is loaded with other great new add-ons as well. Learn more about the 2025 49-PAK!
Bonus PAKs for Band-in-a-Box 2025 for Mac!
With your version 2025 for Mac Pro, MegaPAK, UltraPAK, UltraPAK+, Audiophile Edition or PlusPAK purchase, we'll include a Bonus PAK full of great new Add-ons FREE! Or upgrade to the 2025 49-PAK for only $49 to receive even more NEW Add-ons including 20 additional RealTracks!
These PAKs are loaded with additional add-ons to supercharge your Band-in-a-Box®!
This Free Bonus PAK includes:
- The 2025 RealCombos Booster PAK:
-For Pro customers, this includes 33 new RealTracks and 65+ new RealStyles.
-For MegaPAK customers, this includes 29 new RealTracks and 45+ new RealStyles.
-For UltraPAK customers, this includes 20 new RealStyles.
- Look Ma! More MIDI 13: Country & Americana
- Instrumental Studies Set 22: 2-Hand Piano Soloing - Rhythm Changes
- MIDI SuperTracks Set 44: Jazz Piano
- Artist Performance Set 17: Songs with Vocals 7
- Playable RealTracks Set 4
- RealDrums Stems Set 7: Jazz with Mike Clark
- SynthMaster Sounds and Styles (with audio demos)
- 128 GM MIDI Patch Audio Demos.
Looking for more great add-ons, then upgrade to the 2025 49-PAK for just $49 and you'll get:
- 20 Bonus Unreleased RealTracks and RealDrums with 20 RealStyles,
- FLAC Files (lossless audio files) for the 20 Bonus Unreleased RealTracks and RealDrums
- Look Ma! More MIDI 14: SynthMaster,
- Instrumental Studies Set 23: More '80s Hard Rock Soloing,
- MIDI SuperTracks Set 45: More SynthMaster
- Artist Performance Set 18: Songs with Vocals 8
- RealDrums Stems Set 8: Pop, Funk & More with Jerry Roe
Learn more about the Bonus PAKs for Band-in-a-Box® 2025 for Mac®!
New! Xtra Styles PAK 20 for Band-in-a-Box 2025 and Higher for Mac!
Xtra Styles PAK 20 for Mac & Windows Band-in-a-Box version 2025 (and higher) is here with 200 brand new RealStyles!
We're excited to bring you our latest and greatest in the all new Xtra Styles PAK 20 for Band-in-a-Box! This fresh installment is packed with 200 all-new styles spanning the rock & pop, jazz, and country genres you've come to expect, as well as the exciting inclusion of electronic styles!
In this PAK you’ll discover: Minimalist Modern Funk, New Wave Synth Pop, Hard Bop Latin Groove, Gospel Country Shuffle, Cinematic Synthwave, '60s Motown, Funky Lo-Fi Bossa, Heavy 1980s Metal, Soft Muted 12-8 Folk, J-Pop Jazz Fusion, and many more!
All the Xtra Styles PAKs 1 - 20 are on special for only $29 each (reg $49), or get all 209 PAKs for $199 (reg $399)! Order now!
Learn more and listen to demos of the Xtra Styles PAK 20.
Video: Xtra Styles PAK 20 Overview & Styles Demos: Watch now!
Note: The Xtra Styles require the UltraPAK, UltraPAK+, or Audiophile Edition of Band-in-a-Box®. (Xtra Styles PAK 20 requires the 2025 or higher UltraPAK, UltraPAK+, or Audiophile Edition. They will not work with the Pro or MegaPAK version because they need the RealTracks from the UltraPAK, UltraPAK+, or Audiophile Edition.
New! XPro Styles PAK 9 for Band-in-a-Box 2025 and higher for Mac!
We've just released XPro Styles PAK 9 for Mac & Windows Band-in-a-Box version 2025 (and higher) with 100 brand new RealStyles, plus 29 RealTracks/RealDrums!
We've been hard at it to bring you the latest and greatest in this 9th installment of our popular XPro Styles PAK series! Included are 75 styles spanning the rock & pop, jazz, and country genres (25 styles each) that fans have come to expect, as well as 25 styles in this volume's wildcard genre: funk & R&B!
If you're itching to get a sneak peek at what's included in XPro Styles PAK 9, here is a small helping of what you can look forward to: Funky R&B Horns, Upbeat Celtic Rock, Jazz Fusion Salsa, Gentle Indie Folk, Cool '60s Soul, Funky '70s R&B, Smooth Jazz Hip Hop, Acoustic Rockabilly Swing, Funky Reggae Dub, Dreamy Retro Latin Jazz, Retro Soul-Rock Fusion, and much more!
Special Pricing! Until July 31, 2024, all the XPro Styles PAKs 1 - 9 are on sale for only $29 ea (Reg. $49 ea), or get them all in the XPro Styles PAK Bundle for only $149 (reg. $299)! Order now!
Learn more and listen to demos of XPro Styles PAKs.
Video: XPro Styles PAK 9 Overview & Styles Demos: Watch now!
XPro Styles PAKs require Band-in-a-Box® 2025 or higher and are compatible with ANY package, including the Pro, MegaPAK, UltraPAK, UltraPAK+, and Audiophile Edition.
New! Xtra Styles PAK 20 for Band-in-a-Box 2025 and Higher for Windows!
Xtra Styles PAK 20 for Windows & Mac Band-in-a-Box version 2025 (and higher) is here with 200 brand new RealStyles!
We're excited to bring you our latest and greatest in the all new Xtra Styles PAK 20 for Band-in-a-Box! This fresh installment is packed with 200 all-new styles spanning the rock & pop, jazz, and country genres you've come to expect, as well as the exciting inclusion of electronic styles!
In this PAK you’ll discover: Minimalist Modern Funk, New Wave Synth Pop, Hard Bop Latin Groove, Gospel Country Shuffle, Cinematic Synthwave, '60s Motown, Funky Lo-Fi Bossa, Heavy 1980s Metal, Soft Muted 12-8 Folk, J-Pop Jazz Fusion, and many more!
All the Xtra Styles PAKs 1 - 20 are on special for only $29 each (reg $49), or get all 209 PAKs for $199 (reg $399)! Order now!
Learn more and listen to demos of the Xtra Styles PAK 20.
Video: Xtra Styles PAK 20 Overview & Styles Demos: Watch now!
Note: The Xtra Styles require the UltraPAK, UltraPAK+, or Audiophile Edition of Band-in-a-Box®. (Xtra Styles PAK 20 requires the 2025 or higher UltraPAK, UltraPAK+, or Audiophile Edition. They will not work with the Pro or MegaPAK version because they need the RealTracks from the UltraPAK, UltraPAK+, or Audiophile Edition.
New! XPro Styles PAK 9 for Band-in-a-Box 2025 and higher for Windows!
We've just released XPro Styles PAK 9 for Windows & Mac Band-in-a-Box version 2025 (and higher) with 100 brand new RealStyles, plus 29 RealTracks/RealDrums!
We've been hard at it to bring you the latest and greatest in this 9th installment of our popular XPro Styles PAK series! Included are 75 styles spanning the rock & pop, jazz, and country genres (25 styles each) that fans have come to expect, as well as 25 styles in this volume's wildcard genre: funk & R&B!
If you're itching to get a sneak peek at what's included in XPro Styles PAK 9, here is a small helping of what you can look forward to: Funky R&B Horns, Upbeat Celtic Rock, Jazz Fusion Salsa, Gentle Indie Folk, Cool '60s Soul, Funky '70s R&B, Smooth Jazz Hip Hop, Acoustic Rockabilly Swing, Funky Reggae Dub, Dreamy Retro Latin Jazz, Retro Soul-Rock Fusion, and much more!
Special Pricing! Until July 31, 2024, all the XPro Styles PAKs 1 - 9 are on sale for only $29 ea (Reg. $49 ea), or get them all in the XPro Styles PAK Bundle for only $149 (reg. $299)! Order now!
Learn more and listen to demos of XPro Styles PAKs.
Video: XPro Styles PAK 9 Overview & Styles Demos: Watch now!
XPro Styles PAKs require Band-in-a-Box® 2025 or higher and are compatible with ANY package, including the Pro, MegaPAK, UltraPAK, UltraPAK+, and Audiophile Edition.
Video: Band-in-a-Box® 2025 for Mac®: VST3 Plugin Support
Band-in-a-Box® 2025 for Mac® now includes support for VST3 plugins, alongside VST and AU. Use them with MIDI or audio tracks for even more creative possibilities in your music production.
Band-in-a-Box® 2025 for Macs®: VST3 Plugin Support
Video: Band-in-a-Box® 2025 for Mac®: Using VST3 Plugins
Join the conversation on our forum.
|
|
|
|
|
|
|
|
|
|
|
|
Forums58
Topics84,393
Posts778,632
Members39,645
| |
Most Online25,754
Jan 24th, 2025
|
|
|
|
|
|
|
|
|
Dansk
Deutsch - Windows
Español
Français - Windows
Italiano - Windows
Nederlands
Polski
Português
Svenskt
русский
Japanese
Simplified Chinese
Traditional Chinese
Korean