|
Log in to post
|
Print Thread |
|
|
|
|
|
RealBand
|
Joined: Aug 2011
Posts: 12
Newbie
|
OP
Newbie
Joined: Aug 2011
Posts: 12 |
Hope I'm just missing something here,but. This is my goal. I want to control program changes on my VSTi while it is inserted into an audio track of Realband. Specifically- I open am audio track, insert Amplitube 3(which allows program changes though MDI)and I can find no way to change the programs from inside the track. I can do this easily in Cubase 6, the patch list comes up in the menu and I can change them at will, so I know it CAN be done. I.ve tried also creating a MIDI track as a "control" track, but it seems I cannot "insert" Amplitube 3 (or probably any other "audio" type VSTi) into a MIDI track. That makes sense, but had to try. I've also tried controlling the VSTi "externally". which is the way I control my DMX lighting and vocalist, but no joy controlling Amplitube, GR4,Pod Farm,etc that way. (although it SHOULD) Searched the forums and could find no help, hoping someone can chime in to let me know how or if it even feasable in Realband. I'll keep pecking away at ideas and let you know what else I find. This to me would seem to be a very basic feature. thanks for any help 
Last edited by bob1474; 08/09/11 03:32 AM.
|
|
|
|
|
|
|
|
|
|
|
|
|
RealBand
|
Joined: Jan 2011
Posts: 4,026
Veteran
|
|
Veteran
Joined: Jan 2011
Posts: 4,026 |
Little triangle below track # ,edit dxi/vsti ? Maybe control midi in piano roll >view edit > program ? Audio uses piano roll too for fade ,pan ,aux sends. Hope this helps ,not sure .
|
|
|
|
|
|
|
|
|
|
|
|
|
RealBand
|
Joined: May 2003
Posts: 8,021
Veteran
|
|
Veteran
Joined: May 2003
Posts: 8,021 |
I'm going to guess a little here. I have AT3 it's fairly complex in it's midi setup and the manual is real vague. The guess comes from the fact that RealBand does not support advanced VSTs so do not think it would controll the AT3. If it wasn't so complex i'd give it a whirl. I will try to find out the answer though as to whether it will or won't. That way if it does then you can at least play around and see.
|
|
|
|
|
|
|
|
|
|
|
|
|
RealBand
|
Joined: Jan 2002
Posts: 7,913
Veteran
|
|
Veteran
Joined: Jan 2002
Posts: 7,913 |
Chiming in here just to watch for replies - I have a similar need - want to control 'wah' via automation and/or midi.
|
|
|
|
|
|
|
|
|
|
|
|
|
RealBand
|
Joined: Jun 2005
Posts: 7,697
Veteran
|
|
Veteran
Joined: Jun 2005
Posts: 7,697 |
Quote:
Specifically- I open am audio track, insert Amplitube 3(which allows program changes though MDI)and I can find no way to change the programs from inside the track.
If I'm understanding you, can't you access whatever you want from the plug-in interface when you click on it in the plug-in window (hit the little triangle 'Edit DXi')? I use Sampletank for example and it has all kinds of various effect controls on the screen. I can change those all I want and those settings are saved by hitting "save as preset".
Are you talking about changing presets live via midi while the song is playing? I don't know about that one, never looked into it.
Bob
Biab/RB latest build, Win 11 Pro, Ryzen 5 5600 G, 512 Gig SSD, 16 Gigs Ram, Steinberg UR22 MkII, Roland Sonic Cell, Kurzweil PC3, Hammond SK1, Korg PA3XPro, Garritan JABB, Hypercanvas, Sampletank 3, more.
|
|
|
|
|
|
|
|
|
|
|
|
|
RealBand
|
Joined: May 2000
Posts: 22,459
Veteran
|
|
Veteran
Joined: May 2000
Posts: 22,459 |
Here's how I work around that issue. It may be doable and I just don't know how .. but,
I copy the different sections to new tracks and use the desired preset(s) for that track. There is probably a way to do this, but I'm drawing a blank right now. Maybe it was possible using MIDI Yoke or some other faux MIDI port. In the back of my mind I think I remember a way, but found it easier to just put the deired sections on seperate tracks.
If you're changing the FX sound, might as well have full control. By that I mean if the new (different) effected section is on a different track, I now have the option to really make that track how I want it by using 3 other effects too (on its own track, it gets its own set of 4 plugins). So I accepted the adjustment in method and kept on tracking.
That may not have been clear, so methodology is -
Set up first section effects.
Cut/Paste second section to new track, set up effects
Same for the rest of the sections. Of course, if first section repeats just leave it, copy any second sections parts to the second section track, etc. Simple and efficient, and offers more options.
Last edited by rharv; 08/10/11 05:06 PM.
I do not work here, but the benefits are still awesome
Make your sound your own!
|
|
|
|
|
|
|
|
|
|
|
|
|
RealBand
|
Joined: May 2003
Posts: 8,021
Veteran
|
|
Veteran
Joined: May 2003
Posts: 8,021 |
Yes he wants to control the VST in real time with midi data from a track. The problem here is that I want to find out from Peter or someone if this is even possible. AT3 has a VERY complex MIDI setup and the manual is very vague even to me. I just don't have the time right now to figure out AT3 only to find that it can't be done with RB. If I find out it can then I'll play around with AT3 midi setup.
|
|
|
|
|
|
|
|
|
|
|
|
|
RealBand
|
Joined: Jan 2002
Posts: 7,913
Veteran
|
|
Veteran
Joined: Jan 2002
Posts: 7,913 |
With other DAW software, it's very easy to do this with automation curves. Any control in the plugin that has MIDI controllability is shown in a list - for example, the tone controls in amp settings in AT. You pick that control for automation and you get a 'curve' that you can modify throughout the length of the track, just by modifying the curve. Automation curve controls are available in the cheapest to most expensive DAW software on the planet.
|
|
|
|
|
|
|
|
|
|
|
|
|
RealBand
|
Joined: May 2003
Posts: 8,021
Veteran
|
|
Veteran
Joined: May 2003
Posts: 8,021 |
I'm not real experienced at this aspect but I did do some experimenting. I first used MIDI OX & MIDI YOKE. I told one of the controls in AT3 to learn. I sent CC7 to it and it learned fine. This is with the standalone version of AT3.
I then opened RB and using the event list I created some CC#7 changes on a midi track. If I clicked on transmit in the Event list AT would change accordingly. If I played the track nothing happened.
As far as using the VST version I could get nothing to happen.
May be just my understanding or lack there of of how to set up AT3.
Scott if you tell me how you set AT3 up as an automated VST maybe I can get it to work. Just realized that if you have AT3 you must have tried it yourself with the same results.
|
|
|
|
|
|
|
|
|
|
|
|
|
RealBand
|
Joined: May 2003
Posts: 8,021
Veteran
|
|
Veteran
Joined: May 2003
Posts: 8,021 |
Per Peter it can't be done.
|
|
|
|
|
|
|
|
|
|
|
|
|
RealBand
|
Joined: Jan 2002
Posts: 7,913
Veteran
|
|
Veteran
Joined: Jan 2002
Posts: 7,913 |
John,
First of all, I'm not using PTPA.
Second, I'm not using MIDI - but rather automation controls.
I'm doing this in Tracktion. In Tracktion, with any plugin - if that plugin has automatable controls - they are immediately visible to Tracktion when you instantiate the plugin on a midi or audio track.
Tracktion has a little 'A' on each track and when you click it, you can see all of the controls for the track and the plugins for that track. Sometimes, this list is HUGE for one particular plugin. I don't have AT3, but rather AT1. From memory, I know I can control the gain settings, the overdrive amount, the tone controls, I believe the amp type and cabinet type, reverb setting, etc. with automation controls.
There MAY be Midi CC values assigned to these - I'm not sure - I don't really end up with a need for doing Midi CC because I can do it all with automation control curves.
Automation control is something that's been fairly standard in even the least expensive DAW software for the last 8-10 years at least. You really need it for stuff like this. PG better get it in place (if it isn't) because more and more users are going to expect it. It's one of the reasons I quit using and updating PTPA/RB. Expected plugin functional support gets farther and farther behind.
I'm still hoping that will turn around - there are features that I do miss (notation for example), but they haven't been as big as what I use on every single song I do. I do automation in every song, whether it's fader settings, reverb sends, filtering, VST/VSTi automation, you name it. It's just part of the mixing activity for me now.
I do agree with rharv that if it's simple preset change through the song, then there are other easier ways to control this - just set up multiple instances on different tracks and set the different song sections on the different tracks, with the different presets enabled.
Like I said, the only stuff I do with automation as it pertains to guitar amp/signal simulation is filter kind of stuff: Wah, overall filter bandwidth and resonance automation; sometimes reverb send stuff (like making it sound like I'm walking away from the amp at the end of a song by adjusting the wet/dry mix for reverb as a faded situation).
-Scott
|
|
|
|
|
|
|
|
|
|
|
|
|
RealBand
|
Joined: May 2003
Posts: 8,021
Veteran
|
|
Veteran
Joined: May 2003
Posts: 8,021 |
Yea I played with AT3 in Sonar using the normal automation curves as you say. The new AT3 can also be controlled via MIDI. Not that difficult if your using the standalone and some sort of HW midi controller or even a software controller. As far as using MIDI to control the plug as a VST in the manual all it says is "talk to your DAW people. Paraphrased. That I did with no luck. May be a way.RB & PT don't support automation except of there on mixer controls.
|
|
|
|
|
|
|
|
|
|
|
|
|
RealBand
|
Joined: Aug 2011
Posts: 12
Newbie
|
|
OP
Newbie
Joined: Aug 2011
Posts: 12 |
Thanks everyone for all the input. I've had my head buried in this trying to come up with a solution and have found exactly what I wanted to accomplish. Yes, my main goal was to process program control changes to my VSTi (namely Guitar rig 4) so it would change programs in a a "live" situation so I wouldn't have the distraction of stomping pedals. Really did not care if I accomplished this through the VSTi as an insert or external. Got hold of NI tech support and found the perfect solution.(I guess GR4 is a little teste with what one wouold call "normal" MIDI input) They suggested a little MIDI program called LOOPBe. (free on the net). It creates a virtual MIDI connection between programs. Works like a charm. I assign a MIDI track in Realband, routed to LOOPBe out, use my GR4 as a standalone, using LOOPBe as the MIDI input. I can now change presets at will. I've been using the event editor to enter the program changes I want when I want them. Much joy.
So this for me is working great- I can now cotrol my DMX lighting, Guitar rack, and I've just aquired the new Digitech VL3D vocalist, which is completley controllable through MIDI. So now, after programming everything, I have absolutely NO pedals or settings to change during performance-lights, guitar sounds (keyboard is a no brainer), vocal harmonies, all done through MIDI control-now a robot to actually do the gig, but that would take ALL the fun out of it.
I really do appreciate the help and wanted to share my findings with all.
SOOOO-is it possible to turn the internal effects on and off during plyback through MIDI commands? I would think one couild use CC commands, but there is no indication of this in the help files. Gues one could just use mixer automation in a pinch (?)
|
|
|
|
|
|
|
|
|
|
|
|
|
RealBand
|
Joined: May 2003
Posts: 8,021
Veteran
|
|
Veteran
Joined: May 2003
Posts: 8,021 |
Quote:
Thanks everyone for all the input. I've had my head buried in this trying to come up with a solution and have found exactly what I wanted to accomplish. Yes, my main goal was to process program control changes to my VSTi (namely Guitar rig 4) so it would change programs in a a "live" situation so I wouldn't have the distraction of stomping pedals. Really did not care if I accomplished this through the VSTi as an insert or external. Got hold of NI tech support and found the perfect solution.(I guess GR4 is a little teste with what one wouold call "normal" MIDI input) They suggested a little MIDI program called LOOPBe. (free on the net). It creates a virtual MIDI connection between programs. Works like a charm. I assign a MIDI track in Realband, routed to LOOPBe out, use my GR4 as a standalone, using LOOPBe as the MIDI input. I can now change presets at will. I've been using the event editor to enter the program changes I want when I want them. Much joy.
So this for me is working great- I can now cotrol my DMX lighting, Guitar rack, and I've just aquired the new Digitech VL3D vocalist, which is completley controllable through MIDI. So now, after programming everything, I have absolutely NO pedals or settings to change during performance-lights, guitar sounds (keyboard is a no brainer), vocal harmonies, all done through MIDI control-now a robot to actually do the gig, but that would take ALL the fun out of it.
I really do appreciate the help and wanted to share my findings with all.
SOOOO-is it possible to turn the internal effects on and off during plyback through MIDI commands? I would think one couild use CC commands, but there is no indication of this in the help files. Gues one could just use mixer automation in a pinch (?)
You said you wanted to control it while inserted into a track. If you had told me the right, using the standalone, info I would have told you how. I already do this. program and CC changes on a track. I use MIDIYoke. It's better.
|
|
|
|
|
|
|
|
|
|
|
|
|
RealBand
|
Joined: Aug 2011
Posts: 12
Newbie
|
|
OP
Newbie
Joined: Aug 2011
Posts: 12 |
Silvertones-thanks for the reply-sorry I wasn't clear enough, just wondered which method would be most workable. I'll give MIDIyoke a try later on. Also- running live vocals through a mono audio track using on-board dx insert effects. any way to control these effects through MIDI commands (mainly on-off function) ?
|
|
|
|
|
|
|
|
|
|
|
|
|
RealBand
|
Joined: May 2003
Posts: 8,021
Veteran
|
|
Veteran
Joined: May 2003
Posts: 8,021 |
Unfortunately RB does not support any advanced DXi/VSTi features. This has been a wish list item.
|
|
|
|
|
|
|
|
|
|
|
|
Ask sales and support questions about Band-in-a-Box using natural language.
ChatPG's knowledge base includes the full Band-in-a-Box User Manual and sales information from the website.
|
|
|
|
|
|
|
|
|
|
|
Band-in-a-Box 2026 for Windows Special Offers End Tomorrow (January 15th, 2026) at 11:59 PM PST!
Time really is running out! Save up to 50% on Band-in-a-Box® 2026 for Windows® upgrades and receive a FREE Bonus PAK—only when you order by 11:59 PM PST on Thursday, January 15, 2026!
We've added many major new features and new content in a redesigned Band-in-a-Box® 2026 for Windows®!
Version 2026 introduces a modernized GUI redesign across the program, with updated toolbars, refreshed windows, smoother workflows, and a new Dark Mode option. There’s also a new side toolbar for quicker access to commonly used windows, and the new Multi-View feature lets you arrange multiple windows as layered panels without overlap, making it easier to customize your workspace.
Another exciting new addition is the new AI-Notes feature, which can transcribe polyphonic audio into MIDI. You can view the results in notation or play them back as MIDI, and choose whether to process an entire track or focus on specific parts like drums, bass, guitars/piano, or vocals. There's over 100 new features in Band-in-a-Box® 2026 for Windows®.
There's an amazing collection of new content too, including 202 RealTracks, new RealStyles, MIDI SuperTracks, Instrumental Studies, “Songs with Vocals” Artist Performance Sets, Playable RealTracks Set 5, two RealDrums Stems sets, XPro Styles PAK 10, Xtra Styles PAK 21, and much more!
Upgrade your Band-in-a-Box for Windows to save up to 50% on most Band-in-a-Box® 2026 upgrade packages!
Plus, when you order your Band-in-a-Box® 2026 upgrade during our special, you'll receive a Free Bonus PAK of exciting new add-ons.
If you need any help deciding which package is the best option for you, just let us know. We are here to help!
Band-in-a-Box® 2026 for Windows® Special Offers Extended Until January 15, 2026!
Good news! You still have time to upgrade to the latest version of Band-in-a-Box® for Windows® and save. Our Band-in-a-Box® 2026 for Windows® special now runs through January 15, 2025!
We've packed Band-in-a-Box® 2026 with major new features, enhancements, and an incredible lineup of new content! The program now sports a sleek, modern GUI redesign across the entire interface, including updated toolbars, refreshed windows, smoother workflows, a new dark mode option, and more. The brand-new side toolbar provides quicker access to key windows, while the new Multi-View feature lets you arrange multiple windows as layered panels without overlap, creating a flexible, clutter-free workspace. We have an amazing new “AI-Notes” feature. This transcribes polyphonic audio into MIDI so you can view it in notation or play it back as MIDI. You can process an entire track (all pitched instruments and drums) or focus on individual parts like drums, bass, guitars/piano, or vocals. There's an amazing collection of new content too, including 202 RealTracks, new RealStyles, MIDI SuperTracks, Instrumental Studies, “Songs with Vocals” Artist Performance Sets, Playable RealTracks Set 5, two RealDrums Stems sets, XPro Styles PAK 10, Xtra Styles PAK 21, and much more!
There are over 100 new features in Band-in-a-Box® 2026 for Windows®.
When you order purchase Band-in-a-Box® 2026 before 11:59 PM PST on January 15th, you'll also receive a Free Bonus PAK packed with exciting new add-ons.
Upgrade to Band-in-a-Box® 2026 for Windows® today! Check out the Band-in-a-Box® packages page for all the purchase options available.
Happy New Year!
Thank you for being part of the Band-in-a-Box® community.
Wishing you and yours a very happy 2026—Happy New Year from all of us at PG Music!
Season's Greetings!
Wishing everyone a happy, healthy holiday season—thanks for being part of our community!
The office will be closed for Christmas Day, but we will be back on Boxing Day (Dec 26th) at 6:00am PST.
Team PG
Band-in-a-Box 2026 Video: The Newly Designed Piano Roll Window
In this video, we explore the updated Piano Roll, complete with a modernized look and exciting new features. You’ll see new filtering options that make it easy to focus on specific note groups, smoother and more intuitive note entry and editing, and enhanced options for zooming, looping, and more.
Watch the video.
You can see all the 2026 videos on our forum!
Band-in-a-Box 2026 Video: AI Stems & Notes - split polyphonic audio into instruments and transcribe
This video demonstrates how to use the new AI-Notes feature together with the AI-Stems splitter, allowing you to select an audio file and have it separated into individual stems while transcribing each one to its own MIDI track. AI-Notes converts polyphonic audio—either full mixes or individual instruments—into MIDI that you can view in notation or play back instantly.
Watch the video.
You can see all the 2026 videos on our forum!
Bonus PAK and 49-PAK for Band-in-a-Box® 2026 for Windows®
With your version 2026 for Windows Pro, MegaPAK, UltraPAK, UltraPAK+, Audiophile Edition or PlusPAK purchase, we'll include a Bonus PAK full of great new Add-ons for FREE! Or upgrade to the 2026 49-PAK for only $49 to receive even more NEW Add-ons including 20 additional RealTracks!
These PAKs are loaded with additional add-ons to supercharge your Band-in-a-Box®!
This Free Bonus PAK includes:
- The 2026 RealCombos Booster PAK:
-For Pro customers, this includes 27 new RealTracks and 23 new RealStyles.
-For MegaPAK customers, this includes 25 new RealTracks and 23 new RealStyles.
-For UltraPAK customers, this includes 12 new RealStyles.
- MIDI Styles Set 92: Look Ma! More MIDI 15: Latin Jazz
- MIDI SuperTracks Set 46: Piano & Organ
- Instrumental Studies Set 24: Groovin' Blues Soloing
- Artist Performance Set 19: Songs with Vocals 9
- Playable RealTracks Set 5
- RealDrums Stems Set 9: Cool Brushes
- SynthMaster Sounds Set 1 (with audio demos)
- Android Band-in-a-Box® App (included)
Looking for more great add-ons, then upgrade to the 2026 49-PAK for just $49 and you'll get:
- 20 Bonus Unreleased RealTracks and RealDrums with 20 RealStyle.
- FLAC Files (lossless audio files) for the 20 Bonus Unreleased RealTracks and RealDrums
- MIDI Styles Set 93: Look Ma! More MIDI 16: SynthMaster
- MIDI SuperTracks Set 47: More SynthMaster
- Instrumental Studies 25 - Soul Jazz Guitar Soloing
- Artist Performance Set 20: Songs with Vocals 10
- RealDrums Stems Set 10: Groovin' Sticks
- SynthMaster Sounds & Styles Set 2 (sounds & styles with audio demos)
Learn more about the Bonus PAKs for Band-in-a-Box® 2026 for Windows®!
|
|
|
|
|
|
|
|
|
|
|
|
Forums57
Topics85,748
Posts795,708
Members39,948
| |
Most Online25,754
Jan 24th, 2025
|
|
|
|
|
|
|
|
|
Dansk
Deutsch - Windows
Español
Français - Windows
Italiano - Windows
Nederlands
Polski
Português
Svenskt
русский
Japanese
Simplified Chinese
Traditional Chinese
Korean