|
Log in to post
|
Print Thread |
|
|
|
|
|
RealBand
|
Joined: Jan 2009
Posts: 63
Enthusiast
|
OP
Enthusiast
Joined: Jan 2009
Posts: 63 |
Hi,
I just got a new Win7 based notebook and installed the latest BIAB (and RealBand).
On my old notebook I was running WinXP Pro with the 2008 version of BIAB and friends.
I'm using an external Ketron SD4 synth module. All was working well with the older installation.
Yesterday I had the first chance to try the new configuration live and ran into an interesting problem.
MIDI sequences that sound fine on the WinXP based machine with 2008 BIAB / RealBand suddenly sound lousy on the Win7 machine with the 2011 BIAB / RealBand software.
It sounds like the output is "detuned" and seems to have other related "strangeness".
I changed back to the old notebook and the same MIDI files sound fine there still.
I tried power cycling the Ketron just in case it was somehow in a funky state. That did not help.
The software synth plays fine.
At first I thought it might be the usual suspect of pitch bend sensitivity not being set and an previous MIDI had set it to 12 semitones, but that was not the case.
This happened on a significant number of MIDI files. All of the files in question are GM and are not trying to use any of the additional patches in the SD4.
Is there something that I have missed in the setup or configuration of the 2011 BIAB software that might explain this?
I just tried playing one of the offending sequences with the 2011 version running on WinXP Pro and I don't seem to have the problem. I'll have to switch the HW synth back to the new notebook and try again, but this might be something happening with the installation on the Win7 notebook. In that case I had installed the 2011 version on the notebook HD and was not trying to run from the external HD. So I'll try that configuration there as well.
Has anyone using an external HW Synth with the 2011 BIAB on Win7 seen anything like this?
Thanks,
Burt
|
|
|
|
|
|
|
|
|
|
|
|
|
RealBand
|
Joined: Sep 2003
Posts: 8,333
Veteran
|
|
Veteran
Joined: Sep 2003
Posts: 8,333 |
OK, 1 if it's usb compliant to midi to the Ketron the problem is not there.
If the Ketron does not sound right then you don't have it selected properly.
I suggest, shutdown, reboot with the Ketron there, go into control panel and ensure that it shows up.
If you are using an Edirol interface that's what should show up, NOT windows whatever.
I've done 2 plus year with the Ketron and no problems except for seniors moments.
John Conley
Musica est vita
|
|
|
|
|
|
|
|
|
|
|
|
|
RealBand
|
Joined: Jun 2005
Posts: 7,697
Veteran
|
|
Veteran
Joined: Jun 2005
Posts: 7,697 |
In Real Band, look at the menu items up top, hit Action>Send message>GM. What that means is you're telling RB to send a GM reset. I don't have the wording exactly right but you should see it. After that, all my files play correctly but when you close/reopen you have to do it again. Others have said they've had to do that for years but I don't remember doing that under XP but I'm also changing stuff around a lot so I can't remember exactly what I had set up over a year ago.
Bob
Biab/RB latest build, Win 11 Pro, Ryzen 5 5600 G, 512 Gig SSD, 16 Gigs Ram, Steinberg UR22 MkII, Roland Sonic Cell, Kurzweil PC3, Hammond SK1, Korg PA3XPro, Garritan JABB, Hypercanvas, Sampletank 3, more.
|
|
|
|
|
|
|
|
|
|
|
|
|
RealBand
|
Joined: Jul 2000
Posts: 3,161
Veteran
|
|
Veteran
Joined: Jul 2000
Posts: 3,161 |
The Channel Midi designations are not changed between songs unless some action is taken to reset the Synth. Settings such as Pitchbend, Modulation and Expression are carried forward and can cause distortions in the following song(s). When working with Midi files which contain the above Midi controllers, it is useful to start each track with CC 121 Value Zero which will reset all controllers. When auditioning Midi files and I have this problem, I can reset my Ketron SD2 by turning it off an on.
|
|
|
|
|
|
|
|
|
|
|
|
|
RealBand
|
Joined: Jan 2009
Posts: 63
Enthusiast
|
|
OP
Enthusiast
Joined: Jan 2009
Posts: 63 |
Thanks John,
But it's pretty straight forward. SD4 is plugged into USB port on computer. Win7 identifies it as Ketron SD4 and that is what I select in the MIDI output devices in the RealBand list.
Play a MIDI sequence that is known to work fine under WinXP. Note that it has "issues". Start up the VMWare VM with WinXP Pro running on the same computer. Attach the SD4 to the VM (under XP the driver only says USB Audio Device). Select that USB Audio Device as the MIDI output in RealBand under XP.
Play same exact MIDI file, absolutely fine, great SD4 sounds as always.
In both cases I'm using RealBand 2011, same build, etc. Fresh installs to local hard drive, one install to the Win7 hard drive the other to the WinXP hard drive in the VM. Only obvious difference at the moment is that the one install is under Win7 64 bit and the other is under WinXP (32 bit of course) in the VM. Both running on the same notebook computer.
I'll try sending the GM reset that the other reply mentions, but I don't see any other way to select the Ketron than what I'm doing at present. There is of course a second USB selection option for the SD4, but that one doesn't solve the problem.
I did get an external USB to MIDI adapter yesterday and will try that for grins and giggles.
To the other reply about pitch bend sensitivity and friends, yes I know about that I've hit it the past and actually wrote a utility program that lets me scan MIDI files looking for pitch bend sensitivity issues, reserved CC's being used, and other things that have bitten me in the past with sequences that I have not produced myself. The MIDI(s) I'm testing with are all MIDI specification compliant, and set the pitch bend sensitivity, etc. to proper values with no reserved CCs being used. In addition most of the channels that are "messed up" do not use pitch bend.
Also, I have tried reseting the SD4 by disconnecting it and reconnecting it, and then restarting RealBand. No difference, the output still are messed up when playing under Win7 via RealBand but not under WinXP.
Thanks again to all who have replied. I'll let you know the result of the sending the GM reset.
Burt
|
|
|
|
|
|
|
|
|
|
|
|
|
RealBand
|
Joined: Jul 2002
Posts: 3,730
Veteran
|
|
Veteran
Joined: Jul 2002
Posts: 3,730 |
What about new MIDI files you create with RB & the sd4
Lenovo YOGA 900 Window s 10 Home 64bit M4 pro Mac mini 1tb HD 24GB mem casio wk7500 presonus audiobox i2 usb interface
casio wk-7500
biab & realband 2025 everything pk both with Current builds
|
|
|
|
|
|
|
|
|
|
|
|
|
RealBand
|
Joined: Jan 2009
Posts: 63
Enthusiast
|
|
OP
Enthusiast
Joined: Jan 2009
Posts: 63 |
Hi Mike,
It is basically any, and all MIDIs.
On another group that I belong to the author of vArranger software which is specifically designed for the SD2/SD4 confirms that the issue does indeed exist with the SD4 and Win7, especially if you are doing a non-trivial MIDI sequence.
He says that there is a new version of Ketron firmware that is shipping with new models that does work well with Win7 as far as USB. This is version 1.31 but it is also reported that with V1.31 the MIDI interfaces on the SD4 don't work well. It is hoped that there may be a beta V1.32 of the firmware that addresses both the USB issue as well as the MIDI interface issues.
Also, he reports that using external USB to MIDI adapters appears to work well with Win7 and the SD4 with the older firmware so that will be my first round of testing.
This is part of the information that he provided:
"On windows 7, some messages are not well interpreted and this cause detunes and mutes..... (Burt - This is exactly what I am experiencing!)
When I asked to ketron about this problem, they told me that the SD4 is working well with Windows 7. The fact is if you stress it a litle bit, that is false.
The SD4 is still working with Win 7 if you use an external MIDI USB cable, like Roland UM-ONE."
I will probably need to upgrade the Ketron to V1.30 which is the last official firmware version from the Ketron site. Once I have tested the external interface, and heard back from Ketron regarding firmware update availability I'll update this thread.
Thanks again,
Burt
|
|
|
|
|
|
|
|
|
|
|
|
|
RealBand
|
Joined: Jan 2009
Posts: 63
Enthusiast
|
|
OP
Enthusiast
Joined: Jan 2009
Posts: 63 |
Note that V1.31 is the version of firmware that is reported to work OK with Win7 and USB to SD4. It was unclear if V1.30 is required to work well with external USB to MIDI interfaces and the SD4 so that is what I'm testing initially and updating to V1.30 if needed to get the external USB interface working.
|
|
|
|
|
|
|
|
|
|
|
|
|
RealBand
|
Joined: Jun 2005
Posts: 7,697
Veteran
|
|
Veteran
Joined: Jun 2005
Posts: 7,697 |
Quote:
But it's pretty straight forward. SD4 is plugged into USB port on computer. Win7 identifies it as Ketron SD4 and that is what I select in the MIDI output devices in the RealBand list...
...I'll try sending the GM reset that the other reply mentions, but I don't see any other way to select the Ketron than what I'm doing at present.
It's difficult in a forum to describe what you're hearing. I do know for a fact that you must do a GM On every time you first open RB in Win 7/64. I have a Roland Sonic Cell and like you, my SC shows up in the list as a midi device and it's highlighted. That's all you can do, there's no other options there. Since I have a Roland device I select the GS option but you would select the GM one. If you don't then you hear all kinds of weird stuff because you're not hearing the correct patches they could be anything, and if the midi file has controllers in it like pitch bends then applying a pitch bend to a patch it wasn't designed for can indeed sound very weird including detuned. If you have RB send the "GM On" message and still get weird sounds then I guess it's on to plan B.
Wait for Mac to see this thread, he's a Ketron dealer and knows all about updates and bugs. If he doesn't because I know he's a very busy guy, then try sending him a PM.
Bob
Biab/RB latest build, Win 11 Pro, Ryzen 5 5600 G, 512 Gig SSD, 16 Gigs Ram, Steinberg UR22 MkII, Roland Sonic Cell, Kurzweil PC3, Hammond SK1, Korg PA3XPro, Garritan JABB, Hypercanvas, Sampletank 3, more.
|
|
|
|
|
|
|
|
|
|
|
|
|
RealBand
|
Joined: Jan 2009
Posts: 63
Enthusiast
|
|
OP
Enthusiast
Joined: Jan 2009
Posts: 63 |
Thanks,
Based on the other feed back I had received I was able to get it working under Win7.
I'm using an external USB to MIDI interface instead of the SD4's built in USB. Bit of a pain as I now need to use the external power supply, one more thing to hook up:)
I had an issue with RealBand refusing to recognize the new external USB interface even though it was in the list of output devices. But PG support was able to offer a solution for that.
So now it is working via the external USB to MIDI interface. No more detune and mute sounds from the SD4. So far I have NOT had to send a GM mode command from RealBand. All the MIDIs appear to be working fine via the external interface even with the older SD4 firmware that it came with.
So I would say that it is the USB interface on my SD4 with the version of Firmware that is currently installed on the SD4. At least I have an easier workaround now than using the Virtual Machine with WinXP.
Regards,
Burt
|
|
|
|
|
|
|
|
|
|
|
|
|
RealBand
|
Joined: Jun 2005
Posts: 7,697
Veteran
|
|
Veteran
Joined: Jun 2005
Posts: 7,697 |
Excellent, glad you got it working. Maybe that GS On I have to use is just a Sonic Cell thing, just keep it in mind if you hear strange sounds on some midi file.
Bob
Biab/RB latest build, Win 11 Pro, Ryzen 5 5600 G, 512 Gig SSD, 16 Gigs Ram, Steinberg UR22 MkII, Roland Sonic Cell, Kurzweil PC3, Hammond SK1, Korg PA3XPro, Garritan JABB, Hypercanvas, Sampletank 3, more.
|
|
|
|
|
|
|
|
|
|
|
|
Ask sales and support questions about Band-in-a-Box using natural language.
ChatPG's knowledge base includes the full Band-in-a-Box User Manual and sales information from the website.
|
|
|
|
|
|
|
|
|
|
|
Band-in-a-Box® 2026 for Windows® Special Offers Extended Until January 15, 2026!
Good news! You still have time to upgrade to the latest version of Band-in-a-Box® for Windows® and save. Our Band-in-a-Box® 2026 for Windows® special now runs through January 15, 2025!
We've packed Band-in-a-Box® 2026 with major new features, enhancements, and an incredible lineup of new content! The program now sports a sleek, modern GUI redesign across the entire interface, including updated toolbars, refreshed windows, smoother workflows, a new dark mode option, and more. The brand-new side toolbar provides quicker access to key windows, while the new Multi-View feature lets you arrange multiple windows as layered panels without overlap, creating a flexible, clutter-free workspace. We have an amazing new “AI-Notes” feature. This transcribes polyphonic audio into MIDI so you can view it in notation or play it back as MIDI. You can process an entire track (all pitched instruments and drums) or focus on individual parts like drums, bass, guitars/piano, or vocals. There's an amazing collection of new content too, including 202 RealTracks, new RealStyles, MIDI SuperTracks, Instrumental Studies, “Songs with Vocals” Artist Performance Sets, Playable RealTracks Set 5, two RealDrums Stems sets, XPro Styles PAK 10, Xtra Styles PAK 21, and much more!
There are over 100 new features in Band-in-a-Box® 2026 for Windows®.
When you order purchase Band-in-a-Box® 2026 before 11:59 PM PST on January 15th, you'll also receive a Free Bonus PAK packed with exciting new add-ons.
Upgrade to Band-in-a-Box® 2026 for Windows® today! Check out the Band-in-a-Box® packages page for all the purchase options available.
Happy New Year!
Thank you for being part of the Band-in-a-Box® community.
Wishing you and yours a very happy 2026—Happy New Year from all of us at PG Music!
Season's Greetings!
Wishing everyone a happy, healthy holiday season—thanks for being part of our community!
The office will be closed for Christmas Day, but we will be back on Boxing Day (Dec 26th) at 6:00am PST.
Team PG
Band-in-a-Box 2026 Video: The Newly Designed Piano Roll Window
In this video, we explore the updated Piano Roll, complete with a modernized look and exciting new features. You’ll see new filtering options that make it easy to focus on specific note groups, smoother and more intuitive note entry and editing, and enhanced options for zooming, looping, and more.
Watch the video.
You can see all the 2026 videos on our forum!
Band-in-a-Box 2026 Video: AI Stems & Notes - split polyphonic audio into instruments and transcribe
This video demonstrates how to use the new AI-Notes feature together with the AI-Stems splitter, allowing you to select an audio file and have it separated into individual stems while transcribing each one to its own MIDI track. AI-Notes converts polyphonic audio—either full mixes or individual instruments—into MIDI that you can view in notation or play back instantly.
Watch the video.
You can see all the 2026 videos on our forum!
Bonus PAK and 49-PAK for Band-in-a-Box® 2026 for Windows®
With your version 2026 for Windows Pro, MegaPAK, UltraPAK, UltraPAK+, Audiophile Edition or PlusPAK purchase, we'll include a Bonus PAK full of great new Add-ons for FREE! Or upgrade to the 2026 49-PAK for only $49 to receive even more NEW Add-ons including 20 additional RealTracks!
These PAKs are loaded with additional add-ons to supercharge your Band-in-a-Box®!
This Free Bonus PAK includes:
- The 2026 RealCombos Booster PAK:
-For Pro customers, this includes 27 new RealTracks and 23 new RealStyles.
-For MegaPAK customers, this includes 25 new RealTracks and 23 new RealStyles.
-For UltraPAK customers, this includes 12 new RealStyles.
- MIDI Styles Set 92: Look Ma! More MIDI 15: Latin Jazz
- MIDI SuperTracks Set 46: Piano & Organ
- Instrumental Studies Set 24: Groovin' Blues Soloing
- Artist Performance Set 19: Songs with Vocals 9
- Playable RealTracks Set 5
- RealDrums Stems Set 9: Cool Brushes
- SynthMaster Sounds Set 1 (with audio demos)
- Android Band-in-a-Box® App (included)
Looking for more great add-ons, then upgrade to the 2026 49-PAK for just $49 and you'll get:
- 20 Bonus Unreleased RealTracks and RealDrums with 20 RealStyle.
- FLAC Files (lossless audio files) for the 20 Bonus Unreleased RealTracks and RealDrums
- MIDI Styles Set 93: Look Ma! More MIDI 16: SynthMaster
- MIDI SuperTracks Set 47: More SynthMaster
- Instrumental Studies 25 - Soul Jazz Guitar Soloing
- Artist Performance Set 20: Songs with Vocals 10
- RealDrums Stems Set 10: Groovin' Sticks
- SynthMaster Sounds & Styles Set 2 (sounds & styles with audio demos)
Learn more about the Bonus PAKs for Band-in-a-Box® 2026 for Windows®!
Video: New User Interface (GUI)
Join Tobin as he takes you on a tour of the new user interface in Band-in-a-Box® 2026 for Windows®! This modern GUI redesign offers a sleek new look with updated toolbars, refreshed windows, and a smoother workflow. The brand-new side toolbar puts track selection, the MultiPicker Library, and other essential tools right at your fingertips. Plus, our upgraded Multi-View lets you layer multiple windows without overlap, giving you a highly flexible workspace. Many windows—including Tracks, Piano Roll, and more—have been redesigned for improved usability and a cleaner, more intuitive interface, and more!
Watch the video.
You can see all the 2026 videos on our forum!
|
|
|
|
|
|
|
|
|
|
|
|
Forums57
Topics85,521
Posts792,854
Members39,905
| |
Most Online25,754
Jan 24th, 2025
|
|
|
|
|
|
|
|
|
Dansk
Deutsch - Windows
Español
Français - Windows
Italiano - Windows
Nederlands
Polski
Português
Svenskt
русский
Japanese
Simplified Chinese
Traditional Chinese
Korean