Previous Thread
Index
Next Thread
Print Thread
Go To
Deutsches Band-in-a-Box User Forum
Joined: Nov 2014
Posts: 9
B
Biablo Offline OP
Newbie
OP Offline
Newbie
B
Joined: Nov 2014
Posts: 9
Hallo,

Ich möchte mit meinem neuen Biab 2014 1/2 Endungen in reiner Akkord-Darstellung als PDF ausdrucken.
Auf dem Bildschirm wird im "Fakesheet-Modus" alles korrekt dargestellt, auch die ggf. importierte Melodie wird korrekt abgespielt.

Leider erfolgt aber der Ausdruck der Akkorde immer nur linear.

Ich besaß schon mal vor 10 Jahren eine Biab Version. Wenn ich mich recht erinnere, bin ich (und meine Musikerkollegen) damals schon nicht damit zurechtgekommen. Kann es denn sein, dass so ein grober Fehler in all den Jahren nicht behoben wurde ??

Oder habe ich es in zehn Jahren immer noch nicht verstanden??

Das ganze ist jetzt besonders deswegen ärgerlich, weil ich das PDF auf meinem Tablet anzeigen wollte und dort für die lineare Darstellung nicht so viel Platz wie auf einem A4-Blatt ist.


Last edited by Biablo; 12/01/14 06:23 AM.
Deutsches Band-in-a-Box User Forum
Joined: Jul 2000
Posts: 5,261
Veteran
Offline
Veteran
Joined: Jul 2000
Posts: 5,261
Originally Posted By: Biablo
Oder habe ich es in zehn Jahren immer noch nicht verstanden??

Funktioniert hier völlig problemlos.

Für diagnostische Zwecke könnten eine Reihe von Screenshots mit den jeweiligen Einstellungen für die Notation Options und Print Options nützlich sein.



Martin
Deutsches Band-in-a-Box User Forum
Joined: Nov 2014
Posts: 9
B
Biablo Offline OP
Newbie
OP Offline
Newbie
B
Joined: Nov 2014
Posts: 9
Hallo, MatinB

Ich habe die Screenshots gemacht, aber ich finde hier keine Möglichkeit diese beizufügen (Button, drag / drop o. ä.).

Deutsches Band-in-a-Box User Forum
Joined: Jul 2000
Posts: 5,261
Veteran
Offline
Veteran
Joined: Jul 2000
Posts: 5,261
Einfach auf 'Reply' klicken, anschließend unter 'Post Options' auf 'File Manager' klicken und Screenshot(s) auswählen.

So steht es in den -> FAQ:
Quote:
Can I attach a file to my post?
When creating a new thread or response, you'll see a "File Manager" link on the "Full Reply" or "New Post" page. When selecting this option you'll receive a popup which will allow you to attach files to your post.

Steps:
1. Click "File Manager" to bring up the "Attachment" window.
2. Click "Browse" to bring up the file browser window; this will allow you to browse your computer for any files or images you wish to upload; please note that you're bound by whatever the "allowed file type" setting is for the board.
3. Click "open" on the file you wish to upload.
4. Enter a description of what the file is (if you want to).
5. Click "add file" to add another file, or "done" to close the window and complete your posting.

Please note that you must enter some text in both the "subject" and "post" fields when responding otherwise you will receive an error; you cannot just respond with an attachment wink.


Martin
Deutsches Band-in-a-Box User Forum
Joined: Nov 2014
Posts: 9
B
Biablo Offline OP
Newbie
OP Offline
Newbie
B
Joined: Nov 2014
Posts: 9
Guten Morgen, MartinB,

Hier findest du die Screenshots. Leider hatte ich vergessen, die unteren drei Bilder mit Text zuversehen. So wie der BiaB- Fenster aussieht, wollte ich den Ausdruck haben. Der Papierausdruck sieht dann so wie die Druckvorschau aus.

Peter.

Attached Files (Click to download or enlarge) (Only available when you are logged in)
Print-options.gif (47.64 KB, 37 downloads)
Print Options
Notation-Options.gif (63.34 KB, 36 downloads)
So-solllte-es-sein.gif (89.65 KB, 38 downloads)
Druckvorschau.gif (17.23 KB, 36 downloads)
Last edited by Biablo; 12/01/14 10:10 PM.
Deutsches Band-in-a-Box User Forum
Joined: Nov 2014
Posts: 9
B
Biablo Offline OP
Newbie
OP Offline
Newbie
B
Joined: Nov 2014
Posts: 9
MartinB,

Mein Missverständnis beruht wohl darauf, dass das Papier-Notenblatt (welches in meinem Fall nur Akkorde enthält) immer der Melodie entsprechen muss. Da ich die Melodie per MIDI-Import erstellt hatte, enthält sie keine 1/2-Endungssteuerung. Also ist die Sache schon i. O., anders hätte man es ja wohl kaum machen können.

Deutsches Band-in-a-Box User Forum
Joined: Jul 2000
Posts: 5,261
Veteran
Offline
Veteran
Joined: Jul 2000
Posts: 5,261
Im Chord Sheet sind deutlich 1. und 2. Endungszeichen erkennbar. Irgendwie sind sie also in die BiaB Datei gekommen, Melodie Midi-Import hin oder her.

Das Problem kann hier reproduziert werden, wenn im Lead Sheet Window kein Häckchen bei 'Fake Sheet Mode' gesetzt ist.


Martin
Deutsches Band-in-a-Box User Forum
Joined: Nov 2014
Posts: 9
B
Biablo Offline OP
Newbie
OP Offline
Newbie
B
Joined: Nov 2014
Posts: 9
Guten Morgen, MartinB,

Ja, im Fakesheet-Modus auf dem Bildschirm, also im "Chord Sheet" (wie es BiaB nennt) sehe ich immer die 1/2-Endungen.

Aber nicht auf der Druckvorschau und dem Papierausdruck.

Ich denke mal, dass dies auch nicht so einfach zu realisieren wäre, denn die Notendarstellung im Ausdruck wird wohl immer den der Inhalten der Spuren entsprechen. Und wenn ich in z. B. in eine Melodiespur etwas einspiele oder als Midi importiere, gibt es keine 1/2 -Endungen.

Wenn sich also einige Akkorde wiederholen, müsste BiaB dies anhand der MIDI-Moten erkennen und es würde ja ein Durcheinander entstehen, wenn BiaB im gedruckten Notenblatt jedesmal 1/2. - Endungen darstellen würde.

Nachem ich dies endlich begriffen habe finde ich es so schon i. O.

Da du ja offenbar Erfahrung mit BiaB hast NOCH eine Frage:

Ich möchte den Content der HQ - Pathes (Sample Tank) nicht auf meiner Systemplatte haben. Ich habe sie auf einer anderen Platte installiert, finde aber in BiaB keine Möglichkeit, den zugehörigen Pfad einzustellen. Geht das mit einer Einstellung in der Registry?










Last edited by Biablo; 12/02/14 11:38 PM.
Deutsches Band-in-a-Box User Forum
Joined: Jul 2000
Posts: 5,261
Veteran
Offline
Veteran
Joined: Jul 2000
Posts: 5,261
Originally Posted By: Biablo
Aber nicht auf der Druckvorschau und dem Papierausdruck.

Wie bereits betont, werden im Papierausdruck respektive in der Druckvorschau ebenfalls 1. und 2. Endungen korrekt dargestellt, *wenn* auf dem Lead Sheet Window bei 'Fake Sheet Mode' ein Häkchen gesetzt ist.

Sampletank kann ich nicht kommentieren, da ich es hier überhaupt nicht installiert habe.


Martin
Previous Thread
Next Thread
Go To

Link Copied to Clipboard
ChatPG

Ask sales and support questions about Band-in-a-Box using natural language.

ChatPG's knowledge base includes the full Band-in-a-Box User Manual and sales information from the website.

PG Music News
Band-in-a-Box 2025 Italian Version is Here!

Cari amici
È stata aggerate la versione in Italiano del programma più amato dagli appassionati di musica, il nostro Band-in-a-Box.
Questo è il link alla nuova versione 2025.

Di seguito i link per scaricare il pacchetti di lingua italiana aggiornati per Band-in-a-Box e RealBand, anche per chi avesse già comprato la nuova versione in inglese.

Band-in-a-Box 2025 - Italiano
RealBand 2025 - Italiano

Band-in-a-Box 2025 French Version is Here!

Bonjour à tous,

Band-in-a-Box® 2025 pour Windows est disponible en Français.
Le téléchargement se fait à partir du site PG Music

Pour ceux qui auraient déjà acheté la version 2025 de Band-in-a-Box (et qui donc ont une version anglaise), il est possible de "franciser" cette version avec les patchs suivants:

BIAB 2025 - francisation
RealBand 2025 - francisation

Voilà, enjoy!

Band-in-a-Box 2025 German Version is Here!

Band-in-a-Box 2025 für Windows Deutsch ist verfügbar!

Die deutsche Version Band-in-a-Box® 2025 für Windows ist ab sofort verfügbar!

Alle die bereits die englische Version von Band-in-a-Box und RealBand 2024 installiert haben, finden hier die Installationsdateien für das Sprachenupdate:

https://nn.pgmusic.com/pgfiles/languagesupport/deutsch2025.exe
https://nn.pgmusic.com/pgfiles/languagesupport/deutsch2025RB.exe

Update Your Band-in-a-Box® 2025 to Build 1128 for Windows Today!

Already using Band-in-a-Box 2025 for Windows®? Download Build 1128 now from our Support Page to enjoy the latest enhancements and improvements from our team.

Stay up to date—get the latest update now!

Update to RealBand® 2025 Build 5 Windows Today!

Already using RealBand® 2025 for Windows®? Download Build 5 now from our Support Page to ensure you have the latest enhancements and improvements from our team.

Get the latest update today!

PowerTracks Pro Audio 2025 for Windows is Here!

PowerTracks Pro Audio 2025 is here! This new version introduces many features, including VST3 support, the ability to load or import a .FLAC file, a reset option for track height in the Tracks window, a taller Timeline on the Notation window toolbar, new freeze buttons in the Tracks window, three toolbar modes (two rows, single row, and none), the improved Select Patch dialog with text-based search and numeric patch display, a new button in the DirectX/VST window to copy an effects group, and more!

First-time packages start at only $49. Already a PowerTracks Pro Audio user? Upgrade for as little as $29!

www.pgmusic.com/powertracks.htm

Video: Summary of the New Band-in-a-Box® App for iOS®

Join Tobin as he takes you on a tour of the new Band-in-a-Box® app for iOS®! Designed for musicians, singer-songwriters, and educators, this powerful tool lets you create, play, and transfer songs effortlessly on your iPhone® or iPad®—anytime, anywhere.

Band-in-a-Box® for iOS® :Summary video.

Check out the forum post for more information.

Forum Statistics
Forums58
Topics84,098
Posts774,698
Members39,553
Most Online25,754
Jan 24th, 2025
Newest Members
Joe Long, Curtis flint, carolinahuarta, Tibrogargan, i-mark
39,552 Registered Users
Top Posters(30 Days)
MarioD 197
DC Ron 104
rsdean 99
Noel96 94
WaoBand 87
Today's Birthdays
aminull, Gemini, Tripleshakequeen
Powered by UBB.threads™ PHP Forum Software 7.7.5