|
Log in to post
|
Print Thread |
|
|
|
|
|
Recording, Mixing, Performance and Production
|
Joined: Jan 2006
Posts: 604
Journeyman
|
OP
Journeyman
Joined: Jan 2006
Posts: 604 |
After I have installed win 10 my M-audio 410 sound module is set up giving delay after new boot?
|
|
|
|
|
|
|
|
|
|
|
|
|
Recording, Mixing, Performance and Production
|
Joined: Dec 2000
Posts: 12,844
Veteran
|
|
Veteran
Joined: Dec 2000
Posts: 12,844 |
Is that a Firewire device? From what I can tell, since the FW410 is discontinued, it is not fully supported for use on Windows 10. It may or may not work, and as you can see by the link, it is recommended to install the latest driver.
John Laptop-HP Omen I7 Win11Pro 32GB 12TB SSD Desktop-ASUS-I7 Win10Pro 32GB 12TB SATA BB2026/UMC204HD&404HD/Casios/Cakewalk/Reaper/Studio One/Notion/Dorico/Noteworthy/NI/Halion/IK http://www.sus4chord.com (under rehosting/construction)
|
|
|
|
|
|
|
|
|
|
|
|
|
Recording, Mixing, Performance and Production
|
Joined: Jan 2006
Posts: 604
Journeyman
|
|
OP
Journeyman
Joined: Jan 2006
Posts: 604 |
It's a firewire device, and it's working ok, but is sometimes setup wrong after boot up ??
I think it's time to follow your advice, but which module should I choose?
(I'm still working on Train to Omaha and it may take a long while, I'll try not to forget you John :-)
Strat
|
|
|
|
|
|
|
|
|
|
|
|
|
Recording, Mixing, Performance and Production
|
Joined: Dec 2000
Posts: 12,844
Veteran
|
|
Veteran
Joined: Dec 2000
Posts: 12,844 |
Lots of folks on the forum here seem to like the FocusRite line of audio devices.
I like my M-Audio FastTrackPro, but it's dated now. And Avid sold off the M-Audio line, so it's not exactly what it was (perhaps even better, but others would have to comment).
John Laptop-HP Omen I7 Win11Pro 32GB 12TB SSD Desktop-ASUS-I7 Win10Pro 32GB 12TB SATA BB2026/UMC204HD&404HD/Casios/Cakewalk/Reaper/Studio One/Notion/Dorico/Noteworthy/NI/Halion/IK http://www.sus4chord.com (under rehosting/construction)
|
|
|
|
|
|
|
|
|
|
|
|
|
Recording, Mixing, Performance and Production
|
Joined: Dec 2003
Posts: 24,696
Veteran
|
|
Veteran
Joined: Dec 2003
Posts: 24,696 |
Strat, I have read that some people had to reinstall drivers to get soundcard and audio input devices to work. Have you tried that?
OK, a random thought;
Why does toilet paper need a commercial? Who's not buying it?
64 bit Win 10 Pro, the latest BiaB/RB, Roland Octa-Capture audio interface, a ton of software/hardware
|
|
|
|
|
|
|
|
|
|
|
|
|
Recording, Mixing, Performance and Production
|
Joined: Dec 2012
Posts: 110
Apprentice
|
|
Apprentice
Joined: Dec 2012
Posts: 110 |
I'm using a Presonus Audiobox USB interface and have had no issues upgrading to Win10. It also comes with Studio One Artist DAW which I think is pretty darn good. Not sure of your setup, so it may or may not have as many inputs as you need.
Rich
Windows 10, 64 bit | BIAB 2019 PlusPak | Studio One 2 Artist
|
|
|
|
|
|
|
|
|
|
|
|
|
Recording, Mixing, Performance and Production
|
Joined: Jul 2000
Posts: 27,564
Veteran
|
|
Veteran
Joined: Jul 2000
Posts: 27,564 |
One issue with FireWire devices is that Windows 8 and 10 dropped support for FireWire. Some devices require finding what is known as the "legacy FireWire driver" from Windows 7, installing and selecting it.
Even then, the handwriting is on the wall for the limited future of the FireWire standard.
I'm one of those on the forum using Focusrite Scarlett USB interfaces with good results on Windows 10.
BIAB 2026 Win Audiophile. Software: Fender Studio One 8, Swam horns, Acoustica-7, Notion 6, Song Master Pro, Win 11 Home. Hardware: Intel i9, 32 Gb; Fender Quantom HD8 & Faderport 8, Royer 121, Adam Sub8 & Neumann 120 monitors.
|
|
|
|
|
|
|
|
|
|
|
|
|
Recording, Mixing, Performance and Production
|
Joined: Dec 2006
Posts: 1,590
Expert
|
|
Expert
Joined: Dec 2006
Posts: 1,590 |
Check out the Zoom gear. I use the UAC-2 USB3 interface and love it. They have other interfaces and some wild looking 8 separate input versions. Too expensive for me. Mine's only 2 input! It works a treat with Windows 10 though I had a couple of minor hiccups early on and had to re-install it. The loop back feature is useful for things like streetjelly.
Windows 10 Home 20H2 Build 19042.487
BIAB 2021 (Build 818)
Intel(R) Core(TM), i3-4160, CPU @3.60 GHz RAM 16 GB, 64 Bit X64-based processor
Zoom UAC-2 (USB 3 interface-built in midi)
VoiceLive 3 Extreme, Sputnik Valve Condenser Mic
|
|
|
|
|
|
|
|
|
|
|
|
|
Recording, Mixing, Performance and Production
|
Joined: Jul 2007
Posts: 1,869
Expert
|
|
Expert
Joined: Jul 2007
Posts: 1,869 |
I went back to wIN 7 after toying with WIN 10. My system used a focusrite firewire device and it all worked as intended. So, all hope is not lost. I did not have to tweak, it just happened. I installed over win 7.
Z
Win 11 64, Asus Rog Strix z390 mobo, 64 gig RAM, 8700k
|
|
|
|
|
|
|
|
|
|
|
|
|
Recording, Mixing, Performance and Production
|
|
eddie1261
Unregistered
|
|
eddie1261
Unregistered
|
One issue with FireWire devices is that Windows 8 and 10 dropped support for FireWire. Yet another reason why I will avoid 10 as long as I can. My mixer that the drums run through is connected via Firewire. My studio PC will stay on XP probably forever.
|
|
|
|
|
|
|
|
|
|
|
|
|
Recording, Mixing, Performance and Production
|
Joined: Dec 2013
Posts: 2,732
Veteran
|
|
Veteran
Joined: Dec 2013
Posts: 2,732 |
I'll second that Focusrite USB products work well on Win10.
 Steve BIAB/RB 2022, Pro Tools 2020, Korg N5, JBL LSR 4328 Powered Monitors, AKG/Shure Mics.
PC: Win11 PRO, 4 TB M2 SSD, 2 TB HD, 128 GB Memory
|
|
|
|
|
|
|
|
|
|
|
|
|
Recording, Mixing, Performance and Production
|
Joined: Jan 2006
Posts: 604
Journeyman
|
|
OP
Journeyman
Joined: Jan 2006
Posts: 604 |
I have just bought focusrite Scarlett 2i2, it has the inputs I need and I was promised that I could return it if it didn't work with win 10. All seems to work fine and it is really low noise.
Strat
|
|
|
|
|
|
|
|
|
|
|
|
|
Recording, Mixing, Performance and Production
|
Joined: Dec 2013
Posts: 2,732
Veteran
|
|
Veteran
Joined: Dec 2013
Posts: 2,732 |
Nice Strat. I don't think you'll be disappointed. I even upgraded to one with more ins/outs after I had the starter model.
Steve BIAB/RB 2022, Pro Tools 2020, Korg N5, JBL LSR 4328 Powered Monitors, AKG/Shure Mics.
PC: Win11 PRO, 4 TB M2 SSD, 2 TB HD, 128 GB Memory
|
|
|
|
|
|
|
|
|
|
|
|
|
Recording, Mixing, Performance and Production
|
Joined: Jan 2006
Posts: 604
Journeyman
|
|
OP
Journeyman
Joined: Jan 2006
Posts: 604 |
We have an old saying "the trees don't grow into the heavens". The focusrite works great but sometimes, every now and then, I have to reboot my pc to avoid the audio from youtube to misbehave. If I reboot everything works fine, how come??
Strat
|
|
|
|
|
|
|
|
|
|
|
|
|
Recording, Mixing, Performance and Production
|
Joined: Dec 2013
Posts: 2,732
Veteran
|
|
Veteran
Joined: Dec 2013
Posts: 2,732 |
The focusrite works great but sometimes, every now and then, I have to reboot my pc to avoid the audio from youtube to misbehave. If I reboot everything works fine, how come?? That could be any of several issues. If you have your Focusrite Scarlett Mix Control window up, watch the sampling rate when you hit you tube. I do all of my recording at 96kHz but when I hit the web, sites like you tube will cause the mixer to switch back to 44.1kHz. This usually causes an audio click when it is switching over. I make sure never to have any web browsers open during recording.  Also, if you have BIAB/RB/any DAW open with a 96kHz file, you tube may not run correctly. To resolve that, close your music programs and try you tube again. Audio apps will lock the sampling rate in until they are closed. So watch the mixer when opening you tube to see what's up.
Steve BIAB/RB 2022, Pro Tools 2020, Korg N5, JBL LSR 4328 Powered Monitors, AKG/Shure Mics.
PC: Win11 PRO, 4 TB M2 SSD, 2 TB HD, 128 GB Memory
|
|
|
|
|
|
|
|
|
|
|
|
|
Recording, Mixing, Performance and Production
|
Joined: Jan 2006
Posts: 604
Journeyman
|
|
OP
Journeyman
Joined: Jan 2006
Posts: 604 |
Thanks where do I find the mix control window ?
Strat
|
|
|
|
|
|
|
|
|
|
|
|
|
Recording, Mixing, Performance and Production
|
Joined: Dec 2013
Posts: 2,732
Veteran
|
|
Veteran
Joined: Dec 2013
Posts: 2,732 |
It's the mixer screen software that comes with the Scarlett interfaces. Did you install that software or just the drivers?
Steve BIAB/RB 2022, Pro Tools 2020, Korg N5, JBL LSR 4328 Powered Monitors, AKG/Shure Mics.
PC: Win11 PRO, 4 TB M2 SSD, 2 TB HD, 128 GB Memory
|
|
|
|
|
|
|
|
|
|
|
|
|
Recording, Mixing, Performance and Production
|
Joined: Jan 2006
Posts: 604
Journeyman
|
|
OP
Journeyman
Joined: Jan 2006
Posts: 604 |
I installed the downloads I found on the website, no physical discs were enclosed!
As of win 10 problems I can say that I have to boot up my PC twice to avoid my audio to severely distort,
everytime I boot up my PC I have to boot up once more to avoid audio distortion?
Strat
|
|
|
|
|
|
|
|
|
|
|
|
|
Recording, Mixing, Performance and Production
|
Joined: Jul 2000
Posts: 27,564
Veteran
|
|
Veteran
Joined: Jul 2000
Posts: 27,564 |
I have several Windows 10 PCs each with a Focusrite Scarlett (different models). I followed the instructions to download and install Windows 10 beta drivers but experienced some pops/crackles. Focusrite support directed me to roll back to version 1.8, which fixed the problems.
Note that I never experienced "distortion" and if that's what you have, my suggestion is to 1) verify bit and sample rates and 2) verify what device is controlling the clock timing. In the Focusrite MixControl software, you can set the timing to Internal or to another digital device (if you have one, such as something connected to the Scarlett SP/DIF port.
BIAB 2026 Win Audiophile. Software: Fender Studio One 8, Swam horns, Acoustica-7, Notion 6, Song Master Pro, Win 11 Home. Hardware: Intel i9, 32 Gb; Fender Quantom HD8 & Faderport 8, Royer 121, Adam Sub8 & Neumann 120 monitors.
|
|
|
|
|
|
|
|
|
|
|
|
|
Recording, Mixing, Performance and Production
|
Joined: Dec 2002
Posts: 12,950
Veteran
|
|
Veteran
Joined: Dec 2002
Posts: 12,950 |
Motu reporting compatibility with Win 10 http://www.motu.com/newsitems/motu-and-windows-10/But don't have the nerve to try..... hate to fix something which is not broke.
|
|
|
|
|
|
|
|
|
|
|
|
Ask sales and support questions about Band-in-a-Box using natural language.
ChatPG's knowledge base includes the full Band-in-a-Box User Manual and sales information from the website.
|
|
|
|
|
|
|
|
|
|
|
XPro & Xtra Styles PAK Sets On Sale Now - Until May 15, 2026!
All of our XPro Styles PAKs and Xtra Styles PAKs are on sale until May 15th, 2026!
It's the perfect time to expand your Band-in-a-Box® style library with XPro and Xtra Styles PAKs. These additional styles for Band-in-a-Box® offer a wide range of genres designed to fit seamlessly into your projects. Each style is professionally arranged and mixed, helping enhance your songs while saving you time.
What are XPro Styles and Xtra Styles PAKs?
XPro Styles PAKs are styles that work with any version (Pro, MegaPAK, UltraPAK, UltraPAK+, or Audiophile Edition) of Band-in-a-Box® 2025 (or higher). XPro Styles PAKS 1-10 includes 1,000 styles!
Xtra Styles PAKs are styles that work with the UltraPAK, UltraPAK+, or Audiophile Edition of Band-in-a-Box® 2025 (or higher). Xtra Styles PAKs 1-21 includes 3,700 styles (and 35 MIDI styles)!
The XPro & Xtra Styles PAKs are not included in any Band-in-a-Box® package.
The XPro Styles PAKs 1-10 are available for only $29 ea (reg. $49 ea), or get them all in the XPro Styles PAK Bundle for only $149 (reg. $299)! Listen to demos and order now! For Mac or for Windows.
The Xtra Styles PAKs 1-21 are available for only $29 ea (reg. $49 ea), or get them all in the Xtra Styles PAK Bundle for only $199 (reg. $349)! Listen to demos and order now! For Mac or for Windows.
Note: XPro Styles PAKs require Band-in-a-Box® 2025 or higher and are compatible with ANY package, including the Pro, MegaPAK, UltraPAK, UltraPAK+, and Audiophile Edition.
The Xtra Styles require the UltraPAK, UltraPAK+, or Audiophile Edition of Band-in-a-Box®. (Xtra Styles PAK 19 requires the 2025 or higher UltraPAK, UltraPAK+, or Audiophile Edition. They will not work with the Pro or MegaPAK version as they require the RealTracks included in the UltraPAK, UltraPAK+, or Audiophile Edition.
Supercharge your Band-in-a-Box today with XPro Styles PAKs and Xtra Styles PAK Sets!
Band-in-a-Box 2026 for Mac Videos
With the release of Band-in-a-Box® 2026 for Mac, we’re rolling out a collection of brand-new videos on our YouTube channel. We’ll keep this forum post updated so you can easily find all the latest videos in one convenient spot.
Whether you're exploring new features, checking out the latest RealTracks or Style PAKs, this is your go-to guide for Band-in-a-Box® 2026.
Check out this forum post for "One Stop Shopping" of our Band-in-a-Box® 2026 Mac Videos!
Band-in-a-Box 2026 for Mac is Here!
Band-in-a-Box® 2026 for Mac is here and it is packed with major new features! There’s a new modern look, a GUI redesign to all areas of the program including toolbars, windows, workflow and more. There’s a Multi-view layout for organizing multiple windows. A standout addition is the powerful AI-Notes feature, which uses AI neural-net technology to transcribe polyphonic audio into MIDI—entire mixes or individual instruments—making it easy to study, view, and play parts from any song. And that’s just the beginning—there are over 100 new features in this exciting release.
Along with version 2026, we've released an incredible lineup of new content! There's 202 new RealTracks, brand-new RealStyles, MIDI SuperTracks, Instrumental Studies, “Songs with Vocals” Artist Performance Sets, Playable RealTracks Set 5, two new RealDrums Stems sets, XPro Styles PAK 10, Xtra Styles PAK 21, and much more!
Special Offers
Upgrade to Band-in-a-Box® 2026 for Mac and save up to 50% on most upgrade packages during our special offer—available until May 15, 2026. Visit our Band-in-a-Box® packages page to explore all available upgrade options.
2026 Free Bonus PAK & 49-PAK Add-ons
Our Free Bonus PAK and 49-PAK are loaded with amazing add-ons! The Free Bonus PAK is included with most Band-in-a-Box® 2026 for Mac packages, but you can unlock even more—including 20 unreleased RealTracks—by upgrading to the 2026 49-PAK for just $49.
Holiday Weekend Hours
As we hop into the Easter weekend, here are our holiday hours:
April 3 (Good Friday): 8:00 AM – 4:00 PM PDT
April 4 (Saturday): Closed
April 5 (Easter Sunday): Closed
April 6 (Easter Monday): Open regular hours
Wishing you an egg-cellent weekend!
— Team PG
Update to Build 10 of RealBand® 2026 for Windows®!
If you're already using RealBand 2026 for Windows, download build 10 to get all the latest additions and enhancements.
Band-in-a-Box® 2025 for Mac® users: Build 904 now available!
If you're already using Band-in-a-Box® 2025 for Mac®, make sure to grab the latest update! Build 904 is now available for download and includes the newest additions and enhancements from our team.
Band-in-a-Box® 2026 for Windows® users: Build 1237 is now available!
Already a Band-in-a-Box 2026 for Windows user? Stay up to date and download the build 1237 to get all the latest additions and enhancements.
|
|
|
|
|
|
|
|
|
|
|
|
Forums57
Topics86,191
Posts801,758
Members40,063
| |
Most Online64,515
Apr 8th, 2026
|
|
|
|
|
|
|
|
|
Dansk
Deutsch - Windows
Español
Français - Windows
Italiano - Windows
Nederlands
Polski
Português
Svenskt
русский
Japanese
Simplified Chinese
Traditional Chinese
Korean