I'm recording MIDI melodies through a Roland GR20 MIDI synth. Sounds fine when I'm recording, including the single fret slides into the object note. Checking the piano role, both the notes and the pitch bends are recorded. But the virtual synth that I recorded on the THRU channel (tenor sax TTS-1) doesn't play back the bends on the Melody channel. Checked the piano role and the bends are there. Sure I'm doing something dumb again, don't know what. Thanks again in advance for the help.
DC Ron BiaB Audiophile Presonus Studio One StudioCat DAW dual screen Presonus Faderport 16 Too many guitars (is that a thing?)
I just check via Sonar and found out that yes the TTS-1 does respond to pitch bends. However the pitch bend range is 1 whole step up or down. You will have to look at a MIDI editor (I'm not sure if BiaB has one or not so others will have to come to your aid on this) or in the piano role and see how much of a pitch bend (PB) you have. If it's just a little then you may not hear any difference.
For example if your PB is -8192 and you are playing a D note you will hear a C. But if your PB is something like -25 you may still be hearing a D.
If you want more PB range you have to edit the TTS-1 tenor sax PB range: that is easy to do. If you do you should save that bank in the user banks other wise every time you open TTS-1 you will get the original tenor sax PB range.
Another option is to set your GR20's PB range, if possible, so it matches the TTS-1 range. That is if the +/- whole step is ok with you.
I hope this doesn't confuse you and I hope that it helps.
You know you're getting old when a recliner and a heating pad is your idea of a hot date!
64 bit Win 10 Pro, the latest BiaB/RB, Roland Octa-Capture audio interface, a ton of software/hardware
The older Roland's use a 2 octave +-24 st instead of 1 +-12 st. When I use my GR-20/GK-2 track in Kontakt I add another Modulator >Pitch Bend so it doubles the amount.
Understand what you're saying but am still stumped. Just seems odd that when I play in real time the pitch bends are spot on, and when I play back the recording there is nothing. I'll study this a bit more....
THANKS for the inputs!
DC Ron BiaB Audiophile Presonus Studio One StudioCat DAW dual screen Presonus Faderport 16 Too many guitars (is that a thing?)
Specifying the Bend Range Since the GR-20 transmits Pitch Bend data based on a bend range of 24, you must set your sound module to a bend range of ±24. For details on making this setting, refer to the manual for your sound module.
When you were recording were you hearing the sound from the Roland Woodwind/Sax setting or the virtual synth ?
Make sure it's in Mono mode not Poly as you bend one note it will bend them all.
There's another script if you are using Kontakt to have six individual strings and bends in the one instrument without adding 6 of the same instrument.
When you were recording were you hearing the sound from the Roland Woodwind/Sax setting or the virtual synth ?
Am monitoring only the virtual synth as I record, and the bends are perfect. Am playing back the newly recorded melody track on the same virtual synth setting and nothing, even though the bend events are recorded.
Logical it has to do with the pitch bend range being wrong. Sorry for this quick reply, will spend more time on this after work today.
Thanks to all for the assistance!
DC Ron BiaB Audiophile Presonus Studio One StudioCat DAW dual screen Presonus Faderport 16 Too many guitars (is that a thing?)
Just drag the recorded midi from the track name to MID on the Drop Box then out into a track in Realband just set the same tempo 1st, then add the Virtual Synth to that track and try it.
Progress. If I set the melody track's virtual synth to a pitch bend range of 24 the recorded bends do indeed come out perfectly. I'm GUESSING that the GR20 sends out a command to set the pitch bend range (since I don't have to manually set the virtual synth range when recording) but that this command is not recorded with the MIDI track. If true, I can't see this command in the MIDI monitor. Will play with it some more. Thanks again to all who contributed to reducing my hair pulling time on this one!
DC Ron BiaB Audiophile Presonus Studio One StudioCat DAW dual screen Presonus Faderport 16 Too many guitars (is that a thing?)
so, closing this out...according to the MIDI Implementation chart, the GR20 does transmit pitch bend sensitivity which is why the monitored VSTi bends correctly when recording. However, BiaB does not record pitch bend sensitivity, which is why the same VSTi does not bend correctly when I play back what I just recorded. That is, until I manually reset the pitch bend sensitivity to 24. This explanation is probably imprecise, but close enough so that I know what I need to do. Thx again for all the support!
DC Ron BiaB Audiophile Presonus Studio One StudioCat DAW dual screen Presonus Faderport 16 Too many guitars (is that a thing?)
If you've reviewed our Support page, you've probably noticed the Videos page, which separates our Band-in-a-Box® tutorial videos by category: Overview, VST DAW Plugin, Setup, Beginner, Intermediate, Advanced, and there's even an Archive category to go down memory lane... (You'll also find these videos on our YouTube Channel.)
Ci siamo dati da fare e abbiamo aggiunto oltre 50 nuove funzionalità e una straordinaria raccolta di nuovi contenuti, tra cui 222 RealTracks, nuovi RealStyles, MIDI SuperTracks, Instrumental Studies, "Songs with Vocals" Artist Performance Sets, Playable RealTracks Set 3, Playable RealDrums Set 2, due nuovi set di "RealDrums Stems", XPro Styles PAK 6, Xtra Styles PAK 17 e altro ancora!
Band-in-a-Box® 2024 apporte plus de 50 fonctions nouvelles ainsi qu'une importante de contenus nouveaux à savoir : 222 RealTracks, des RealStyles nouveaux, des SuperTracks MIDI, des Etudes d'Instruments, des Prestations d'Artistes, des "Morceaux avec Choeurs", un Set 3 de Tracks Jouables, un Set 2 de RealDrums Jouables, deux nouveaux Sets de "RealDrums Stems", des Styles XPro PAK 6, des Xtra Styles PAK 17 et bien plus encore!
Video: Making a Song with Band-in-a-Box®, ChatGPT, and Synth V
Take your Band-in-a-Box® project to a whole new level when you incorporate ChatGPT and Synth V to add lyrics and vocals to your song!
We wanted to demonstrate how this is done with our video, where we show you how to go from nothing to a finished "radio ready" modern pop song by combining the features of Band-in-a-Box®, ChatGPT, and Synth V!
User Video: Next-Level AI Music Editing with ACE Studio and Band-in-a-Box®
The Bob Doyle Media YouTube channel is known for demonstrating how you can creatively incorporate AI into your projects - from your song projects to avatar building to face swapping, and more!
His latest video, Next-Level AI Music Editing with ACE Studio and Band-in-a-Box, he explains in detail how you can use the Melodist feature in Band-in-a-Box with ACE Studio. Follow along as he goes from "nothing" to "something" with his Band-in-a-Box MIDI Melodist track, using ACE Studio to turn it into a vocal track (or tracks, you'll see) by adding lyrics for those notes that will trigger some amazing AI vocals!
Wir waren fleißig und haben über 50 neue Funktionen und eine erstaunliche Sammlung neuer Inhalte hinzugefügt, darunter 222 RealTracks, neue RealStyles, MIDI SuperTracks, Instrumental Studies, "Songs with Vocals" Artist Performance Sets, abspielbare RealTracks Set 3, abspielbare RealDrums Set 2, zwei neue Sets von "RealDrums Stems", XPro Styles PAK 6, Xtra Styles PAK 17 und mehr!
One of our representatives will be happy to help you over the phone. Our hours of operation are from
6:00AM to 6:00PM PST (GMT -8) Monday thru Friday, and 8:00AM to 4:00PM PST Saturday. We are closed Sunday. You can also send us your questions via email.
One of our representatives will be happy to help you on our Live Chat or by email. Our hours of operation are from
6:00AM to 6:00PM PST (GMT -8) Monday thru Friday; 8:00AM to 4:00PM PST (GMT -8) Saturday; Closed Sunday.