I've had BIAB 2018 for one week now. My setup is Windows 10 PC, 32 GB RAM, fast processor, running BIAB on the PGMusic usb hard drive.
The program has frozen twice so far. Just now I had a song playing. I tried to stop it but no methods worked: the stop icon, right clicking on the icon on the task bar & selecting close window, opening a new song, nothing worked. All menus and toolbars were locked. The tune just kept playing and playing.
Finally I had to run Windows Task Manager to force BIAB to close. All other programs worked fine.
The song is "Joy to the World", which I had downloaded from an Internet a few years ago when I ran the 2010 version.
After forcing BIAB closed with Win. Task Manager, I rebooted the PC. I opened BIAB after Windows finished loading.
I ran the same song. It played through to the end. I started play again and was able to use the STOP icon.
Maybe the first time BIAB was having an issue in the background. I had played other tunes and tried different styles, before the program locked in play.
I still wonder if anyone encountered this problem?
Do you run BIAB in "Run as administrator" mode? This is recommended by PG Music.
To do this, right-click on the start-up short-cut and select "Properties". Under the "Compatibility" tab, activate the option "Run as administrator". This will set the option permanently.
Note: this is different from logging in to Windows as Administrator.
It's also possible to select "Run as administrator" by right-click on the start-up short-cut and selecting "Run as administrator". This does not set the option permanently.
Thank you Noel. I set the BIAB shortcut icon as you suggested.
I also did the same thing for my iTunes icon, since it always needs to run in admin mode. I had been selecting Admin mode each time I ran iTunes. Now with this setup the program opens automatically. Genius!
Sadly it happened again tonight. My PC froze while one song kept playing, and wouldn't stop.
I'd been playing a few song files and trying different styles & instruments. Several songs worked perfectly, and then BIAB locked up. The song kept playing, non-stop, while no other features of the program seemed to work. All menus and icons were frozen. Finally I had to use Windows Task Manager to stop BIAB.
BIAB was running in administrator mode, on my Windows 10 PC. There were no error messages or other problems on the computer. Previous tunes played and stopped perfectly in BIAB until that last one.
I suggest you consider a few non-BIAB causes. For example, check your RAM. BIAB uses perhaps more RAM than most programs. Download MEMTEST and run it overnight.
And, there’s the ever-popular static electricity that shows up with low humidity in the late fall. Do you have a carpet under your chair? Spray it with static cling spray. Touch the metal frame of a desk before sitting down.
BIAB 2025 Win Audiophile. Software: Studio One 7 Pro, Swam horns, Acoustica-7, Notion 6, Song Master Pro, Win 11 Home. Hardware: Intel i9, 32 Gb; Roland Integra-7, Presonus 192 & Faderport 8, Royer 121, Adam Sub8 & Neumann 120 monitors.
Thanks again for your help; I appreciate it so much.
The songs I'm playing are almost all from Internet downloads. The downloads are older files, and are all MIDI. I previously played (or downloaded and not played previously) the songs through BIAB version 2010.
When I open these files in my 2018 version, BIAB suggests substituting RealTracks for MIDI, for better sound quality. I've been clicking on those messages to accept the upgrade from MIDI to RealTracks, and saving the changed files when I'n done with them.
I have a handful of songs that I created with 2018, and a couple with BIAB 2010. Most are downloads though.
There is one error message that appears every time I begin a BIAB 2018 session. It is error 9997, and appears to alert me about an error with my ability to record. Since I'm not trying to record yet, I haven't addressed these messages. Here is the full startup message from my FlahMessageLog file. It's long but maybe it will mean more to you than to my inexperienced eyes:
"Running Windows Notepad.exe to display file J:\bb\Data\Logs\FlashMessageLog.txt [2018.520.0, 11/4/2018 2:35:38 AM] Windows Audio Session error: Input and output sample rates must match. Audio input (recording) will be disabled. The error number is -9997 [2018.520.0, 11/4/2018 2:35:04 AM] Windows Audio Session error: Could not open stream. The error number is -9997 [2018.520.0, 11/4/2018 2:35:04 AM] Bootup was optimal, set to fast [2018.520.0, 11/4/2018 2:35:04 AM] Bootup time in millseconds =7,331 [2018.520.0, 11/4/2018 2:35:04 AM] Time to Count Plugins in ms =141. Plugins counted=20 [2018.520.0, 11/4/2018 2:34:59 AM]."
The error 9997 is not a serious one and it's due to using the WAS driver for audio (this is the "Windows Audio Session" driver you see listed in your log).
Have a look at the link below and setup your audio and MIDI drivers exactly as I show. These settings are the most sturdy for BIAB (they're the settings I use).
Thanks for your ongoing tech help. I began implementing your audio and midi settings, but ran into a small snag. In your diagram 2, covering midi driver setup, my choices are different than yours on the left hand side, under "MIDI Input Driver". My computer does not have the SB Adigy 2 2S MIDI IO option.
Is that your soundcard?
Two screen shots are enclosed. One shows my audio interface, an iConnectAUDIO4. The second screen capture shows my MIDI DSriver option dialog.
Thank you for posting the images, they help a great deal
In the above link I provided, I was meaning for you to follow the numbers and set everything according to the numbers. The Audigy is my indeed my soundcard and, as you can see, it's not numbered.
When I look at your MIDI set-up, using the numbers that I have in the above link, you have everything correct except for #3 and #7. If you go back to the link and compare my settings with yours, you'll see what I mean.
The most important thing is to set the audio driver to MME. Even though your audio driver settings show this, the link to the audio driver via your MIDI driver (#7 on my MIDI driver image) shows that WAS is still the audio driver. This should say MME.
In the MIDI driver setup, try clicking on #7 and then change the WAS to MME.
Band-in-a-Box® 2025 pour Windows est disponible en Français.
Le téléchargement se fait à partir du site PG Music
Pour ceux qui auraient déjà acheté la version 2025 de Band-in-a-Box (et qui donc ont une version anglaise), il est possible de "franciser" cette version avec les patchs suivants:
Band-in-a-Box 2025 für Windows Deutsch ist verfügbar!
Die deutsche Version Band-in-a-Box® 2025 für Windows ist ab sofort verfügbar!
Alle die bereits die englische Version von Band-in-a-Box und RealBand 2024 installiert haben, finden hier die Installationsdateien für das Sprachenupdate:
Update Your Band-in-a-Box® 2025 to Build 1128 for Windows Today!
Already using Band-in-a-Box 2025 for Windows®? Download Build 1128 now from our Support Page to enjoy the latest enhancements and improvements from our team.
Already using RealBand® 2025 for Windows®? Download Build 5 now from our Support Page to ensure you have the latest enhancements and improvements from our team.
PowerTracks Pro Audio 2025 is here! This new version introduces many features, including VST3 support, the ability to load or import a .FLAC file, a reset option for track height in the Tracks window, a taller Timeline on the Notation window toolbar, new freeze buttons in the Tracks window, three toolbar modes (two rows, single row, and none), the improved Select Patch dialog with text-based search and numeric patch display, a new button in the DirectX/VST window to copy an effects group, and more!
First-time packages start at only $49. Already a PowerTracks Pro Audio user? Upgrade for as little as $29!
Video: Summary of the New Band-in-a-Box® App for iOS®
Join Tobin as he takes you on a tour of the new Band-in-a-Box® app for iOS®! Designed for musicians, singer-songwriters, and educators, this powerful tool lets you create, play, and transfer songs effortlessly on your iPhone® or iPad®—anytime, anywhere.
One of our representatives will be happy to help you over the phone. Our hours of operation are from
6:00AM to 6:00PM PST (GMT -8) Monday thru Friday, and 8:00AM to 4:00PM PST Saturday. We are closed Sunday. You can also send us your questions via email.
One of our representatives will be happy to help you on our Live Chat or by email. Our hours of operation are from
6:00AM to 6:00PM PST (GMT -8) Monday thru Friday; 8:00AM to 4:00PM PST (GMT -8) Saturday; Closed Sunday.
Dansk
Deutsch - Windows
Español
Français - Windows
Italiano - Windows
Nederlands
Polski
Português
Svenskt
русский
Japanese
Simplified Chinese
Traditional Chinese
Korean