I recently purchased a TX81Z to use with Band In A Box. When I have everything connected, I can tell that I'm close to getting some sound because I am getting flickering lights that show through the plastic of the USB part of my USB-MIDI interface (so I'm figuring it's midi data, right?). But so far no sound. Any suggestions?
You need MIDI out from your computer to MIDI in on the TX. You will also need audio out from the TX to audio in on your audio interface. You will hear nothing with only the MIDI connections.
The bumper sticker said "I'm a veterinarian, therefore I can drive like an animal". Suddenly I realized how many proctologists are on the road.
64 bit Win 10 Pro, the latest BiaB/RB, Roland Octa-Capture audio interface, a ton of software/hardware
I'm getting sound now but, along with the sound on each part, I am also hearing the sound of the patch that is being displayed on my TX81Z. Any suggestions?
If I'm understanding what you're saying that makes sense. That is you are hearing both the sounds from your BIAB sound source and from the 81Z right? If that's the case, it has to do with what channels you have the 81Z setup to respond to. By default, BIAB outputs as follows:
If I understand you correctly, all sounds are coming from the TX81Z.
Test this by turning the TX's volume off. Are you still hearing sounds? If yes then no the sounds are not coming from the TX.
Originally Posted By: terriandralph
I have the Basic Receive Channel on the TX81Z set to omni.
If your TX is set to omni and you are sending all of BiaB's sounds to it then yes you are hearing all of the sounds in the TX. Questions, are you hearing more than one TX sound? Do you have one patch set on the TX or a multi, sometimes called a combo? In order to hear one sound only from the TX BiaB's MIDI out MUST match the TX's MIDI in. In a multi/combo mode each BiaB tracks' MIDI out MUST match each TX patch's MIDI input.
Currently the only way I've been able to hear anything is when I plug my headphones into the TX81Z. I have tried various ways of connecting through loopmidi and MIDI USB Interface but have been unable to get any sounds when I plug into my laptop. I know I'm missing something, but so far I can't come up with the answer.
Currently the only way I've been able to hear anything is when I plug my headphones into the TX81Z. I have tried various ways of connecting through loopmidi and MIDI USB Interface but have been unable to get any sounds when I plug into my laptop. I know I'm missing something, but so far I can't come up with the answer.
You will not get any sound through MIDI cables or connections.
I'm assuming that you do not have an audio interface, right?
If not you need to take the audio out on the TX and plug it into the mic in on your laptop. This is not the optimum way of recording as an audio interface will give you a much cleaner sound.
For stereo you would plug the two 1/4" plugs into the TX's I/MIX and II inputs and the other end into your laptop:
Note if you have an audio interface the above is the same with the only difference being replacing the laptop mic plug with either 1/4" plugs or XLR plugs, depending on what you audio interface with except.
Just remember no sound goes through MIDI cables, just data that a synth or computer can use.
The bumper sticker said "I'm a veterinarian, therefore I can drive like an animal". Suddenly I realized how many proctologists are on the road.
64 bit Win 10 Pro, the latest BiaB/RB, Roland Octa-Capture audio interface, a ton of software/hardware
Thanks MarioD - that should solve the problem of being able to get sound by connecting my headphones to my laptop. Now if I can find an answer to my "unwanted sound" problem...
Thanks MarioD - that should solve the problem of being able to get sound by connecting my headphones to my laptop. Now if I can find an answer to my "unwanted sound" problem...
OK, grab one of those audio cables or get some from another source and hook them up. You should get the TX sound(s) through your computer. In the mean time list exactly what you are using. Things like what kind of laptop, ram, do you have an audio interface, if so what kind? Things like this can help us tremendously. We really need to know exactly what you are doing to further help you.
The bumper sticker said "I'm a veterinarian, therefore I can drive like an animal". Suddenly I realized how many proctologists are on the road.
64 bit Win 10 Pro, the latest BiaB/RB, Roland Octa-Capture audio interface, a ton of software/hardware
Well I went ahead and purchased the audio interface - I should be receiving it Monday. Maybe then I won't have this problem with the "unwanted sound"? I certainly hope so!
I was checking my channels (Options>Preference>Channels) and I noticed that the Piano, Drums and Soloist are all set to channel 1. Is this right?
I did create my own patch map for the TX81Z – maybe I didn’t set it up correctly?
Those channels are not correct, did you change them? Below see my midi channel setup which is simply the default. There is no reason for you to change that. Bass is 2, Piano 3, Drums 10 and the Soloist is 8 plus the others. You have to set your TX patches for those instruments to match those channels. Yes, you can do it the other way around, match Biab to your TX channels but why? KISS it for now keep the Biab default.
The TX has 32 patch memory locations. Make one of those patches your Soloist for example. Inside that patch you'll be able to set the midi channel to 8. I assume you have the manual for it, it should explain how to do that for each patch you want to use in Biab.
How you use the patch map in Biab is you right click on the instrument name in the top of your screen click Select MIDI Instrument Patch then Select Higher Bank Patch (From .Pat File) and you will see your patch map. This is AFTER you've set the midi channels. This is the point I made your other thread. If you were using a GM synth all that would be done automatically, here you have to select the patches and set the channels yourself.
Although I won't get my audio interface until Monday, I did some more experimenting with my setup and found out a little more about the "unwanted sound" I keep getting. I'm hoping someone out there has come across it.
For example, when I isolate the bass track (and mute all of the other tracks), I not only hear the bass sound but what I can best describe as a high metallic repeated note (sort of like a drum roll) that seems to somewhat mirror the bass notes. In other words, if a single bass note plays, along with the bass note I hear that high metallic repeated note sound. When the bass note changes pitch, the high metallic repeated note sound also changes pitch. I have done this with other tracks (having only one track play while the others are muted), and no matter what track I have playing (with the other tracks muted), that high metallic repeated note sound is also playing. Since I have muted all of the other tracks, I can't seem to put a finger on where this sound is coming from.
Although I don't receive the message any longer, I noticed in the beginning that when I first tried to get sounds out of the TX81Z, I received some sort of "data full" message on the TX81Z. Maybe I'm having a midi feedback issue or something similar?
Don't know but have you sorted your midi channels out? Also, now that you're using a hardware synth have you UNCHECKED the "Use VSTi/DXi Synth" in your Midi/Audio Drivers window?
Also, do you play an instrument yourself? Are you planning on playing a controller and using the TX for sound? If so unplug the midi cable from your computer and run it from your controller to the TX then simply play the TX and see what happens. You can change patches by using the buttons on the TX itself.
Thanks for letting us know that it is resolved, and the method used. This can assist others also.
BIAB & RB2026 Win.(Audiophile), Windows 10 Pro & Windows 11, Cakewalk Bandlab, Izotope Prod.Bundle, Roland RD-1000, Synthogy Ivory, Session Keys Grand S & Electric R, Kontakt, Focusrite 18i20, KetronSD2, NS40M, Pioneer Active Monitors.
Band-in-a-Box® 2025 for Mac® users: Build 904 now available!
If you're already using Band-in-a-Box® 2025 for Mac®, make sure to grab the latest update! Build 904 is now available for download and includes the newest additions and enhancements from our team.
PowerTracks 2026 is here—bringing powerful new enhancements designed to make your production workflow faster, smoother, and more intuitive than ever.
The enhanced Mixer now shows Track Type and Instrument icons for instant track recognition, while a new grid option simplifies editing views. Non-floating windows adopt a modern title bar style, replacing the legacy blue bar.
The Master Volume is now applied at the end of the audio chain for consistent levels and full-signal master effects.
Tablature now includes a “Save bends when saving XML” option for improved compatibility with PG Music tools. Plus, you can instantly match all track heights with a simple Ctrl-release after resizing, and Add2 chords from MGU/SGU files are now fully supported... and more!
Get started today—first-time packages start at just $49.
Already using PowerTracks Pro Audio? Upgrade for as little as $29 and enjoy the latest improvements!
Band-in-a-Box 2026 for Windows Special Offers End Tomorrow (January 15th, 2026) at 11:59 PM PST!
Time really is running out! Save up to 50% on Band-in-a-Box® 2026 for Windows® upgrades and receive a FREE Bonus PAK—only when you order by 11:59 PM PST on Thursday, January 15, 2026!
We've added many major new features and new content in a redesigned Band-in-a-Box® 2026 for Windows®!
Version 2026 introduces a modernized GUI redesign across the program, with updated toolbars, refreshed windows, smoother workflows, and a new Dark Mode option. There’s also a new side toolbar for quicker access to commonly used windows, and the new Multi-View feature lets you arrange multiple windows as layered panels without overlap, making it easier to customize your workspace.
Another exciting new addition is the new AI-Notes feature, which can transcribe polyphonic audio into MIDI. You can view the results in notation or play them back as MIDI, and choose whether to process an entire track or focus on specific parts like drums, bass, guitars/piano, or vocals. There's over 100 new features in Band-in-a-Box® 2026 for Windows®.
There's an amazing collection of new content too, including 202 RealTracks, new RealStyles, MIDI SuperTracks, Instrumental Studies, “Songs with Vocals” Artist Performance Sets, Playable RealTracks Set 5, two RealDrums Stems sets, XPro Styles PAK 10, Xtra Styles PAK 21, and much more!
Upgrade your Band-in-a-Box for Windows to save up to 50% on most Band-in-a-Box® 2026 upgrade packages!
Plus, when you order your Band-in-a-Box® 2026 upgrade during our special, you'll receive a Free Bonus PAK of exciting new add-ons.
If you need any help deciding which package is the best option for you, just let us know. We are here to help!
Band-in-a-Box® 2026 for Windows® Special Offers Extended Until January 15, 2026!
Good news! You still have time to upgrade to the latest version of Band-in-a-Box® for Windows® and save. Our Band-in-a-Box® 2026 for Windows® special now runs through January 15, 2025!
We've packed Band-in-a-Box® 2026 with major new features, enhancements, and an incredible lineup of new content! The program now sports a sleek, modern GUI redesign across the entire interface, including updated toolbars, refreshed windows, smoother workflows, a new dark mode option, and more. The brand-new side toolbar provides quicker access to key windows, while the new Multi-View feature lets you arrange multiple windows as layered panels without overlap, creating a flexible, clutter-free workspace. We have an amazing new “AI-Notes” feature. This transcribes polyphonic audio into MIDI so you can view it in notation or play it back as MIDI. You can process an entire track (all pitched instruments and drums) or focus on individual parts like drums, bass, guitars/piano, or vocals. There's an amazing collection of new content too, including 202 RealTracks, new RealStyles, MIDI SuperTracks, Instrumental Studies, “Songs with Vocals” Artist Performance Sets, Playable RealTracks Set 5, two RealDrums Stems sets, XPro Styles PAK 10, Xtra Styles PAK 21, and much more!
There are over 100 new features in Band-in-a-Box® 2026 for Windows®.
When you order purchase Band-in-a-Box® 2026 before 11:59 PM PST on January 15th, you'll also receive a Free Bonus PAK packed with exciting new add-ons.
Upgrade to Band-in-a-Box® 2026 for Windows® today! Check out the Band-in-a-Box® packages page for all the purchase options available.
One of our representatives will be happy to help you over the phone. Our hours of operation are from
6:00AM to 6:00PM PST (GMT -8) Monday thru Friday, and 8:00AM to 4:00PM PST Saturday. We are closed Sunday. You can also send us your questions via email.
One of our representatives will be happy to help you on our Live Chat or by email. Our hours of operation are from
6:00AM to 6:00PM PST (GMT -8) Monday thru Friday; 8:00AM to 4:00PM PST (GMT -8) Saturday; Closed Sunday.
Dansk
Deutsch - Windows
Español
Français - Windows
Italiano - Windows
Nederlands
Polski
Português
Svenskt
русский
Japanese
Simplified Chinese
Traditional Chinese
Korean