|
Log in to post
|
Print Thread |
|
|
|
|
|
Band-in-a-Box for Windows
|
Joined: Aug 2000
Posts: 368
Journeyman
|
OP
Journeyman
Joined: Aug 2000
Posts: 368 |
Re Peter Gannon’s posting “Here’s a no-brainer ....install Cakewalk and the TTS-1 64 bit (free)”
I have a two questions:
1) I run BB from the hard drive it came on. Peter advises that Cakewalk should be installed inside Band-in-a-Box 64, which in my case would on the BB hard drive. However, the downloaded version of Cakewalk installs itself on my C-drive, without offering an option to install it somewhere else. Is there a solution for this?
2) Presently I am using a Roland SD-50 to produce my non-MIDI sounds, with which I am quite happy, but I would indeed prefer “Great sound with Band-in-a-Box - likely better than any MIDI sound you’ve heard before with Band-in-a-Box” for my non MIDI-sounds. Could TTS-1 work alongside my SD-50?
Hope to hear from you soon.
Tonnie van der Heide
Bergen, Norway
|
|
|
|
|
|
|
|
|
|
|
|
|
Band-in-a-Box for Windows
|
Joined: Dec 2002
Posts: 12,205
Veteran
|
|
Veteran
Joined: Dec 2002
Posts: 12,205 |
1) I run BB from the hard drive it came on. Peter advises that Cakewalk should be installed inside Band-in-a-Box 64, which in my case would on the BB hard drive. However, the downloaded version of Cakewalk installs itself on my C-drive, without offering an option to install it somewhere else. Is there a solution for this?
You have this a bit confused. There are no restrictions as to where you install Cakewalk. All you are after is the location where Cakewalk puts the TTS plugin. Then you simply tell BIAB where it is. Thats all.
2) Presently I am using a Roland SD-50 to produce my non-MIDI sounds, with which I am quite happy, but I would indeed prefer “Great sound with Band-in-a-Box - likely better than any MIDI sound you’ve heard before with Band-in-a-Box” for my non MIDI-sounds. Could TTS-1 work alongside my SD-50?
Not sure what you mean by "non-midi" sounds? But I do believe you can have two different midi players at the same time. So, very good chance you can use both the TTS-1 and SD-50, on different channels of course, at the same time.
BIAB – 2025, Reaper (current), i7-12700F Processor, 32GB DDR4-3200MHz RAM, 1TB WD Black NVMe SSD, 2TB WDC Blue SSD, 1TB WD Blue, 2 TB SK NVMe, 6 TB External, Motu Audio Express 6x6
|
|
|
|
|
|
|
|
|
|
|
|
|
Band-in-a-Box for Windows
|
Joined: Aug 2000
Posts: 368
Journeyman
|
|
OP
Journeyman
Joined: Aug 2000
Posts: 368 |
Thanks for your answer!
By "non-midi" sounds, I mean Real Sounds (prerecorded Real Instruments).
Tonnie
|
|
|
|
|
|
|
|
|
|
|
|
|
Band-in-a-Box for Windows
|
Joined: Jul 2000
Posts: 26,969
Veteran
|
|
Veteran
Joined: Jul 2000
Posts: 26,969 |
Ok, I think this thread means, how do I get better sounds for MIDI than the Roland SD-50. The SD-50 is pretty good. I’ve used all the Roland MIDI synths.
The TTS synth from Cakewalk is a General MIDI synth. It’s basically free and it sounds ok. Im not sure it qualifies as ‘great’. Twenty years ago, I might have said it’s great. A non-GM synth would be better, but you can pay thousands. So is your question how to get better sounds for free? If not free, what’s your budget? What genre do you play, and what instruments are most important to you?
Finally, it’s not possible in BIAB (to my knowledge) to mix MIDI output devices. You need a DAW for that. I don’t use RealBand but I would expect it would work.
BIAB 2025 Win Audiophile. Software: Studio One 7 Pro, Swam horns, Acoustica-7, Notion 6, Song Master Pro, Win 11 Home. Hardware: Intel i9, 32 Gb; Roland Integra-7, Presonus 192 & Faderport 8, Royer 121, Adam Sub8 & Neumann 120 monitors.
|
|
|
|
|
|
|
|
|
|
|
|
|
Band-in-a-Box for Windows
|
Joined: Oct 2008
Posts: 732
Journeyman
|
|
Journeyman
Joined: Oct 2008
Posts: 732 |
The TTS Synth sounds OK. It is fine for a quick listen. I would not use it in production of music for others to listen to. It is not of that quality.
My wife asked if I had seen the dog bowl. I told her I didn't even know he could.
|
|
|
|
|
|
|
|
|
|
|
|
|
Band-in-a-Box for Windows
|
Joined: Dec 2003
Posts: 23,092
Veteran
|
|
Veteran
Joined: Dec 2003
Posts: 23,092 |
The TTS Synth sounds OK. It is fine for a quick listen. I would not use it in production of music for others to listen to. It is not of that quality. IMHO that is true of all GM sound sources.
Doc-take it easy John this is just a sharp scalpel. It will not cut deep so don't worry.
Me-I'm not John
Doc-I know, I am!
64 bit Win 10 Pro, the latest BiaB/RB, Roland Octa-Capture audio interface, a ton of software/hardware
|
|
|
|
|
|
|
|
|
|
|
|
|
Band-in-a-Box for Windows
|
Joined: Jul 2000
Posts: 26,969
Veteran
|
|
Veteran
Joined: Jul 2000
Posts: 26,969 |
If I remember the context of Dr. Gannon's suggestion, it was that there is a free GM MIDI synth, and it's not bad if you don't have anything to play your MIDI. This is what I think, although I may be remembering it wrong.
Tonnie, if you want advice about great MIDI sound, state your needs and your budget, and you'll get some excellent advice here.
BIAB 2025 Win Audiophile. Software: Studio One 7 Pro, Swam horns, Acoustica-7, Notion 6, Song Master Pro, Win 11 Home. Hardware: Intel i9, 32 Gb; Roland Integra-7, Presonus 192 & Faderport 8, Royer 121, Adam Sub8 & Neumann 120 monitors.
|
|
|
|
|
|
|
|
|
|
|
|
|
Band-in-a-Box for Windows
|
Joined: Aug 2000
Posts: 368
Journeyman
|
|
OP
Journeyman
Joined: Aug 2000
Posts: 368 |
Mat,
Thanks!
I prefer the best possible sound for my MIDI sounds!!!!! The budget is not important, but at the technical side, I prefer to keep things as simple as possible, so I can concentrate on making music and arranging.
Is use REAL sounds, whenever possible and am happy with the sound quality it produces, However using MIDI for the melody (and my own created background), I find that only the flute and vibraphone come close to sounding OK. Most other instruments sound like "toys". So any suggestion will be most welcome!
Tonnie
|
|
|
|
|
|
|
|
|
|
|
|
|
Band-in-a-Box for Windows
|
Joined: Dec 2003
Posts: 23,092
Veteran
|
|
Veteran
Joined: Dec 2003
Posts: 23,092 |
.........................
Is use REAL sounds, whenever possible and am happy with the sound quality it produces, However using MIDI for the melody (and my own created background), I find that only the flute and vibraphone come close to sounding OK. Most other instruments sound like "toys". So any suggestion will be most welcome!
Tonnie I agree that RTs sound great IF they match what you are doing but for total control you need MIDI sound sources. Your "Most other instruments sound like "toys"" statement is IMHO true for all GM sound sources. GM is good in BiaB for scratching out backing tracks but for polished work you need better MIDI sounds. I would suggest that you work with Kontakt or SampleTank. I use Kontakt because it has a ton of native and third party sound presets. Other can chime in on SampleTank. I suggest you get the free Kontakt Player first. Play with it to see if it fits your workflow. Just remember that if you purchase other presets BE SURE they say they work in Kontakt Player as some will only work in the full Kontakt. If you like the Player you can then purchase the full version IF you want more sounds and control over those sounds. Many people only use the Player. I use the full version. Also google/Bing (an instrument of your choice) VSTi. There are many VSTis that don't need a player and some are very inexpensive and/or free. You may find sounds that you want there; I have a number of them that I use. If you have heard any of my songs on the Showcase forum you will hear many of them as I mostly work in MIDI. Note that I do my chord work in BiaB then immediately after that move everything to my DAW Studio Pro One 5 as I find working in a DAW is much easier then working in BiaB. I had the same workflow when I was using Cakewalk then Sonar. I hope this helps and if you have any questions feel free to ask. PS - If you like Kontakt and want the full version wait for a sale. They usually have at least one a year. You can usually purchase Kontakt for about half price.
Doc-take it easy John this is just a sharp scalpel. It will not cut deep so don't worry.
Me-I'm not John
Doc-I know, I am!
64 bit Win 10 Pro, the latest BiaB/RB, Roland Octa-Capture audio interface, a ton of software/hardware
|
|
|
|
|
|
|
|
|
|
|
|
|
Band-in-a-Box for Windows
|
Joined: Jul 2000
Posts: 26,969
Veteran
|
|
Veteran
Joined: Jul 2000
Posts: 26,969 |
Tonnie, I defer to Mario here. I use a hardware MIDI synth, the Roland Integra-7, because I'm a composer and I don't produce radio-quality material, just good composer demos. I prefer the speed and convenience of a hardware device (except that you can't render at less than real time). But if I needed to go to 'the best possible' I would do what Mario is recommending and open up my checkbook. Note that Mario normally only uses MIDI, not RealTracks. He is also a fine musician. We've even met. I would follow his advice.
BIAB 2025 Win Audiophile. Software: Studio One 7 Pro, Swam horns, Acoustica-7, Notion 6, Song Master Pro, Win 11 Home. Hardware: Intel i9, 32 Gb; Roland Integra-7, Presonus 192 & Faderport 8, Royer 121, Adam Sub8 & Neumann 120 monitors.
|
|
|
|
|
|
|
|
|
|
|
|
|
Band-in-a-Box for Windows
|
Joined: Dec 2002
Posts: 12,205
Veteran
|
|
Veteran
Joined: Dec 2002
Posts: 12,205 |
M
the best possible sound for my MIDI sounds ... but at the technical side, I prefer to keep things as simple as possible, so I can concentrate on making music and arranging Contradictory statements but you are on the right track 
BIAB – 2025, Reaper (current), i7-12700F Processor, 32GB DDR4-3200MHz RAM, 1TB WD Black NVMe SSD, 2TB WDC Blue SSD, 1TB WD Blue, 2 TB SK NVMe, 6 TB External, Motu Audio Express 6x6
|
|
|
|
|
|
|
|
|
|
|
|
|
Band-in-a-Box for Windows
|
Joined: Oct 2008
Posts: 732
Journeyman
|
|
Journeyman
Joined: Oct 2008
Posts: 732 |
The TTS Synth sounds OK. It is fine for a quick listen. I would not use it in production of music for others to listen to. It is not of that quality. IMHO that is true of all GM sound sources. I agree completely.
My wife asked if I had seen the dog bowl. I told her I didn't even know he could.
|
|
|
|
|
|
|
|
|
|
|
|
|
Band-in-a-Box for Windows
|
Joined: Aug 2000
Posts: 368
Journeyman
|
|
OP
Journeyman
Joined: Aug 2000
Posts: 368 |
Mario,
Thanks for your reply.
I did a background check on you, so that is why it took some time to react.
My normal use of BB is:
1) accompanying me, while playing my guitar (mostly jazz and some latin)
2) reharmonizing songs
3) creating my own arrangements to play to.
This means that I prefer BB, as it will vary the bass line, drums and piano comping etc. somewhat for each chorus, like a real jazz group would do.
Question 1: will I still be able to play Real sounds, while using Kontakt Player for backgrounds and (counter) melodies, that I have created in BB?
Question 2: once a song is set up for using the sounds from Kontakt Player, can I still just press play, or is there a setup necessary for each "playback"?
I see from Kontakts Specifications page, that I might need a new laptop (4 GB RAM, or 6 GB recommended for large KONTAKT Instruments).
Hope to hear from you.
Tonnie
|
|
|
|
|
|
|
|
|
|
|
|
|
Band-in-a-Box for Windows
|
Joined: Dec 2003
Posts: 23,092
Veteran
|
|
Veteran
Joined: Dec 2003
Posts: 23,092 |
Mario,
Thanks for your reply.
I did a background check on you, so that is why it took some time to react.
My normal use of BB is:
1) accompanying me, while playing my guitar (mostly jazz and some latin)
2) reharmonizing songs
3) creating my own arrangements to play to.
This means that I prefer BB, as it will vary the bass line, drums and piano comping etc. somewhat for each chorus, like a real jazz group would do.
Question 1: will I still be able to play Real sounds, while using Kontakt Player for backgrounds and (counter) melodies, that I have created in BB?
Question 2: once a song is set up for using the sounds from Kontakt Player, can I still just press play, or is there a setup necessary for each "playback"? I see from Kontakts Specifications page, that I might need a new laptop (4 GB RAM, or 6 GB recommended for large KONTAKT Instruments).
Hope to hear from you.
Tonnie
Doc-take it easy John this is just a sharp scalpel. It will not cut deep so don't worry.
Me-I'm not John
Doc-I know, I am!
64 bit Win 10 Pro, the latest BiaB/RB, Roland Octa-Capture audio interface, a ton of software/hardware
|
|
|
|
|
|
|
|
|
|
|
|
Ask sales and support questions about Band-in-a-Box using natural language.
ChatPG's knowledge base includes the full Band-in-a-Box User Manual and sales information from the website.
|
|
|
|
|
|
|
|
|
|
|
Band-in-a-Box 2025 Italian Version is Here!
Cari amici
È stata aggerate la versione in Italiano del programma più amato dagli appassionati di musica, il nostro Band-in-a-Box.
Questo è il link alla nuova versione 2025.
Di seguito i link per scaricare il pacchetti di lingua italiana aggiornati per Band-in-a-Box e RealBand, anche per chi avesse già comprato la nuova versione in inglese.
Band-in-a-Box 2025 - Italiano
RealBand 2025 - Italiano
Band-in-a-Box 2025 French Version is Here!
Bonjour à tous,
Band-in-a-Box® 2025 pour Windows est disponible en Français.
Le téléchargement se fait à partir du site PG Music
Pour ceux qui auraient déjà acheté la version 2025 de Band-in-a-Box (et qui donc ont une version anglaise), il est possible de "franciser" cette version avec les patchs suivants:
BIAB 2025 - francisation
RealBand 2025 - francisation
Voilà, enjoy!
Band-in-a-Box 2025 German Version is Here!
Update Your Band-in-a-Box® 2025 to Build 1128 for Windows Today!
Already using Band-in-a-Box 2025 for Windows®? Download Build 1128 now from our Support Page to enjoy the latest enhancements and improvements from our team.
Stay up to date—get the latest update now!
Update to RealBand® 2025 Build 5 Windows Today!
Already using RealBand® 2025 for Windows®? Download Build 5 now from our Support Page to ensure you have the latest enhancements and improvements from our team.
Get the latest update today!
PowerTracks Pro Audio 2025 for Windows is Here!
PowerTracks Pro Audio 2025 is here! This new version introduces many features, including VST3 support, the ability to load or import a .FLAC file, a reset option for track height in the Tracks window, a taller Timeline on the Notation window toolbar, new freeze buttons in the Tracks window, three toolbar modes (two rows, single row, and none), the improved Select Patch dialog with text-based search and numeric patch display, a new button in the DirectX/VST window to copy an effects group, and more!
First-time packages start at only $49. Already a PowerTracks Pro Audio user? Upgrade for as little as $29!
www.pgmusic.com/powertracks.htm
Video: Summary of the New Band-in-a-Box® App for iOS®
Join Tobin as he takes you on a tour of the new Band-in-a-Box® app for iOS®! Designed for musicians, singer-songwriters, and educators, this powerful tool lets you create, play, and transfer songs effortlessly on your iPhone® or iPad®—anytime, anywhere.
Band-in-a-Box® for iOS® :Summary video.
Check out the forum post for more information.
|
|
|
|
|
|
|
|
|
|
|
|
Forums58
Topics84,084
Posts775,189
Members39,585
| |
Most Online25,754
Jan 24th, 2025
|
|
|
|
|
|
|
|
|
Dansk
Deutsch - Windows
Español
Français - Windows
Italiano - Windows
Nederlands
Polski
Português
Svenskt
русский
Japanese
Simplified Chinese
Traditional Chinese
Korean