|
Log in to post
|
Print Thread |
|
|
|
|
|
Off-Topic
|
Joined: Jul 2015
Posts: 2,741
Veteran
|
Veteran
Joined: Jul 2015
Posts: 2,741 |
Outside of music I design, build, and repair electronics - guitar amps, pedals, mic preamps - and I am working on more repair videos for my youtube channel. I also do some sound design for video games (as well as playing a lot of video games) or other audio recording/engineering. I go swimming whenever possible, as they're one of the forms of exercise I can actually do with a spine injury, though I do like an occasional light walk in the woods. Otherwise I'm cooking or baking something with my partner, or maybe reading comics. Being autistic, I tend to get very deep into other hobbies from time to time, but those usually don't stick around long enough to be worth mentioning. Building electronics  Nice! What amp is that? A failure...lol What I wanted to do was to design a two channel amp that could be switched with a foot switch. One channel would sound like a Fender Vibroverb and the other like a 100 watt Soldano. Both channels sounded pretty good but I could never get them to switch properly at high volume. One speaker cab with a 15 for the Vibroverb and two 12's for the Soldano. I tried several brands of speakers. Mercury Magnetics input transformer and custom made output transformer. Four 6L6 output tube ( I messed around with some 6550's) and 5 12Ax7 pre tubes all matched for me by Eurotubes in Portland. I have been fooling around with it for a couple of years. Lots of conversations with Bruce Zinky. He could most likely design what I wanted...I just could not afford the four or five thousand design fee...lol I think I got to ask Roy Blakenship a few questions but he is a really busy guy. It is loud as hell so I have to take it away from my house to test it. Actually I am not sure what I will do with the amp....I have a small fortune tied up in parts...lol Billy
“Amazing! I’ll be working with Jaco Pastorius, Charlie Parker, Art Tatum, and Buddy Rich, and you’re telling me it’s not that great of a gig?
“Well…” Saint Peter, hesitated, “God’s got this girlfriend who thinks she can sing…”
|
|
|
|
|
|
|
|
|
|
|
|
|
Off-Topic
|
Joined: Jan 2020
Posts: 3,647
Veteran
|
|
Veteran
Joined: Jan 2020
Posts: 3,647 |
ALL.
heres a little challenge for the diy electronic gurus here.
(ive tried and failed on several occasions in the past.)
i call it the MOJO PRE. an in line 20 db mic pre with one xlr input, and line out to sound interface line in.
mojo pre has one control a "mojo pot". ie character.
specs.
1. easy to build low cost diy under 30 buks.
2. single low voltage supply. 9 volt battery would be great.
(with bipolar op amp supplies, one often ends up with too many darn components. and yes i know bout the 5 buckie mic pre.)
3. low component count.
4. maybe useing a low voltage cheap "new technology tube" or a couple of germanium transistors ?.
i'm not an electronics guru. lol.
best
oldmuso
my interests are songwriting crazy songs, singing,
jaunts/travel with my lovely wife who i adore and who spoils me rotten lol
(jaunts now limited due to covid. just got the pfizer jab. so far no side fx.)
just happy to be alive on this crazy planet after surgery over a year ago.
a particular interest of mine is researching space travel,
and whether certain types of future tech like magnetic propulsion might be the solution rather than current fuel technology. which i feel is old tech.
Last edited by justanoldmuso; 04/16/21 01:54 AM.
my songs....mixed for good earbuds...(fyi..my vocs on all songs..) https://soundcloud.com/alfsongs(90 songs created useing bb/rb) (lots of tips of mine in pg tips forum.)
|
|
|
|
|
|
|
|
|
|
|
|
|
Off-Topic
|
Joined: Jun 2012
Posts: 21,094
Veteran
|
|
Veteran
Joined: Jun 2012
Posts: 21,094 |
2. single low voltage supply. 9 volt battery would be great.
(with bipolar op amp supplies, one often ends up with too many darn components. and yes i know bout the 5 buckie mic pre.)
4. maybe useing a low voltage cheap "new technology tube" or a couple of germanium transistors Sadly, 2 and 4 don't mix. A 9 volt battery isn't going to reliably give the 100volt+ HV that the anode requires of a vacuum tube, and supply the heater current. Germanium transistors? I would have thought that at the very least, a low noise analog op-amp with feedback set for the right gain would have been a much more effective option. But just my 2 cents.
BIAB & RB2026 Win.(Audiophile), Windows 10 Pro & Windows 11, Cakewalk Bandlab, Izotope Prod.Bundle, Roland RD-1000, Synthogy Ivory, Session Keys Grand S & Electric R, Kontakt, Focusrite 18i20, KetronSD2, NS40M, Pioneer Active Monitors.
|
|
|
|
|
|
|
|
|
|
|
|
|
Off-Topic
|
Joined: May 2020
Posts: 2,766
Veteran
|
|
Veteran
Joined: May 2020
Posts: 2,766 |
A failure...lol
What I wanted to do was to design a two channel amp that could be switched with a foot switch. One channel would sound like a Fender Vibroverb and the other like a 100 watt Soldano. Sounds similar to my Rivera Knucklehead - one channel can do Fender Blackface (with a pull knob for Tweed) and the other does Marshall-style crunch (with a pull knob for boost that gets quite hairy). It has fewer gain stages than a Soldano might have, but probably would sound pretty close. Anyway, keep at it, hopefully you'll get it working! 2. single low voltage supply. 9 volt battery would be great.
(with bipolar op amp supplies, one often ends up with too many darn components. and yes i know bout the 5 buckie mic pre.)
4. maybe useing a low voltage cheap "new technology tube" or a couple of germanium transistors Sadly, 2 and 4 don't mix. A 9 volt battery isn't going to reliably give the 100volt+ HV that the anode requires of a vacuum tube, and supply the heater current. Germanium transistors? I would have thought that at the very least, a low noise analog op-amp with feedback set for the right gain would have been a much more effective option. But just my 2 cents. I agree, 2 and 4 won't mix without "too many darn components". From a 9v, you'd need a voltage booster to be able to drive a tube, or even an op-amp, and this style of voltage booster would add noise to the circuit. Even with a Nutube, it requires 17ma of heater current alone, and would flatten a 9v battery in half a day or less. AA's would be better, or 18650's. Germanium transistors are most often not low noise. They're sensitive to temperature in regards to noise output. Any germanium transistor available these days is going to be "new old stock" at best, or used and half dead at worst. Low noise analog op-amp, sounds like a perfect application for the 5 buck preamp. Still requires more than 9 volts though.
I work here
|
|
|
|
|
|
|
|
|
|
|
|
|
Off-Topic
|
Joined: Apr 2003
Posts: 1,580
Expert
|
|
Expert
Joined: Apr 2003
Posts: 1,580 |
This is the perfect discussion to ask the following: have any of you checked out the Finhol Blues Bass Board? If you haven’t, please check it out on YouTube (just do a YouTube search for “Finhol Blues Bass Board” and check out the video). For some reason, it is no longer being made....but, in my view, it’s really neat and it sounds great particularly for playing BLUES music!!! I’d love to have one for sure....can one of you tell me where one can be found OR CAN ONE OF YOU BUILD ONE? Please respond back with any suggestions about how I might get my hands on one of these....THANKS TREMENDOUSLY!!!
Cecil
|
|
|
|
|
|
|
|
|
|
|
|
|
Off-Topic
|
|
eddie1261
Unregistered
|
|
eddie1261
Unregistered
|
Never a failure. Just an early draft!
|
|
|
|
|
|
|
|
|
|
|
|
|
Off-Topic
|
Joined: Jul 2015
Posts: 2,741
Veteran
|
|
Veteran
Joined: Jul 2015
Posts: 2,741 |
This is the perfect discussion to ask the following: have any of you checked out the Finhol Blues Bass Board? If you haven’t, please check it out on YouTube (just do a YouTube search for “Finhol Blues Bass Board” and check out the video). For some reason, it is no longer being made....but, in my view, it’s really neat and it sounds great particularly for playing BLUES music!!! I’d love to have one for sure....can one of you tell me where one can be found OR CAN ONE OF YOU BUILD ONE? Please respond back with any suggestions about how I might get my hands on one of these....THANKS TREMENDOUSLY!!!
Cecil Here is one on Reverb for sale. https://reverb.com/item/7058938-thomann-finhol-blues-bass-board-2017-wood-aluminumBilly
“Amazing! I’ll be working with Jaco Pastorius, Charlie Parker, Art Tatum, and Buddy Rich, and you’re telling me it’s not that great of a gig?
“Well…” Saint Peter, hesitated, “God’s got this girlfriend who thinks she can sing…”
|
|
|
|
|
|
|
|
|
|
|
|
|
Off-Topic
|
Joined: Apr 2003
Posts: 1,580
Expert
|
|
Expert
Joined: Apr 2003
Posts: 1,580 |
Billy......thanks tremendously!!! I’ll pursue getting it if it’s still there!!!
THANKS VERY MUCH,
Cecil
|
|
|
|
|
|
|
|
|
|
|
|
Ask sales and support questions about Band-in-a-Box using natural language.
ChatPG's knowledge base includes the full Band-in-a-Box User Manual and sales information from the website.
|
|
|
|
|
|
|
|
|
|
|
XPro & Xtra Styles PAK Sets On Sale Now - Until May 15, 2026!
All of our XPro Styles PAKs and Xtra Styles PAKs are on sale until May 15th, 2026!
It's the perfect time to expand your Band-in-a-Box® style library with XPro and Xtra Styles PAKs. These additional styles for Band-in-a-Box® offer a wide range of genres designed to fit seamlessly into your projects. Each style is professionally arranged and mixed, helping enhance your songs while saving you time.
What are XPro Styles and Xtra Styles PAKs?
XPro Styles PAKs are styles that work with any version (Pro, MegaPAK, UltraPAK, UltraPAK+, or Audiophile Edition) of Band-in-a-Box® 2025 (or higher). XPro Styles PAKS 1-10 includes 1,000 styles!
Xtra Styles PAKs are styles that work with the UltraPAK, UltraPAK+, or Audiophile Edition of Band-in-a-Box® 2025 (or higher). Xtra Styles PAKs 1-21 includes 3,700 styles (and 35 MIDI styles)!
The XPro & Xtra Styles PAKs are not included in any Band-in-a-Box® package.
The XPro Styles PAKs 1-10 are available for only $29 ea (reg. $49 ea), or get them all in the XPro Styles PAK Bundle for only $149 (reg. $299)! Listen to demos and order now! For Mac or for Windows.
The Xtra Styles PAKs 1-21 are available for only $29 ea (reg. $49 ea), or get them all in the Xtra Styles PAK Bundle for only $199 (reg. $349)! Listen to demos and order now! For Mac or for Windows.
Note: XPro Styles PAKs require Band-in-a-Box® 2025 or higher and are compatible with ANY package, including the Pro, MegaPAK, UltraPAK, UltraPAK+, and Audiophile Edition.
The Xtra Styles require the UltraPAK, UltraPAK+, or Audiophile Edition of Band-in-a-Box®. (Xtra Styles PAK 19 requires the 2025 or higher UltraPAK, UltraPAK+, or Audiophile Edition. They will not work with the Pro or MegaPAK version as they require the RealTracks included in the UltraPAK, UltraPAK+, or Audiophile Edition.
Supercharge your Band-in-a-Box today with XPro Styles PAKs and Xtra Styles PAK Sets!
Band-in-a-Box 2026 for Mac Videos
With the release of Band-in-a-Box® 2026 for Mac, we’re rolling out a collection of brand-new videos on our YouTube channel. We’ll keep this forum post updated so you can easily find all the latest videos in one convenient spot.
Whether you're exploring new features, checking out the latest RealTracks or Style PAKs, this is your go-to guide for Band-in-a-Box® 2026.
Check out this forum post for "One Stop Shopping" of our Band-in-a-Box® 2026 Mac Videos!
Band-in-a-Box 2026 for Mac is Here!
Band-in-a-Box® 2026 for Mac is here and it is packed with major new features! There’s a new modern look, a GUI redesign to all areas of the program including toolbars, windows, workflow and more. There’s a Multi-view layout for organizing multiple windows. A standout addition is the powerful AI-Notes feature, which uses AI neural-net technology to transcribe polyphonic audio into MIDI—entire mixes or individual instruments—making it easy to study, view, and play parts from any song. And that’s just the beginning—there are over 100 new features in this exciting release.
Along with version 2026, we've released an incredible lineup of new content! There's 202 new RealTracks, brand-new RealStyles, MIDI SuperTracks, Instrumental Studies, “Songs with Vocals” Artist Performance Sets, Playable RealTracks Set 5, two new RealDrums Stems sets, XPro Styles PAK 10, Xtra Styles PAK 21, and much more!
Special Offers
Upgrade to Band-in-a-Box® 2026 for Mac and save up to 50% on most upgrade packages during our special offer—available until May 15, 2026. Visit our Band-in-a-Box® packages page to explore all available upgrade options.
2026 Free Bonus PAK & 49-PAK Add-ons
Our Free Bonus PAK and 49-PAK are loaded with amazing add-ons! The Free Bonus PAK is included with most Band-in-a-Box® 2026 for Mac packages, but you can unlock even more—including 20 unreleased RealTracks—by upgrading to the 2026 49-PAK for just $49.
Holiday Weekend Hours
As we hop into the Easter weekend, here are our holiday hours:
April 3 (Good Friday): 8:00 AM – 4:00 PM PDT
April 4 (Saturday): Closed
April 5 (Easter Sunday): Closed
April 6 (Easter Monday): Open regular hours
Wishing you an egg-cellent weekend!
— Team PG
Update to Build 10 of RealBand® 2026 for Windows®!
If you're already using RealBand 2026 for Windows, download build 10 to get all the latest additions and enhancements.
Band-in-a-Box® 2025 for Mac® users: Build 904 now available!
If you're already using Band-in-a-Box® 2025 for Mac®, make sure to grab the latest update! Build 904 is now available for download and includes the newest additions and enhancements from our team.
Band-in-a-Box® 2026 for Windows® users: Build 1237 is now available!
Already a Band-in-a-Box 2026 for Windows user? Stay up to date and download the build 1237 to get all the latest additions and enhancements.
|
|
|
|
|
|
|
|
|
|
|
|
Forums57
Topics86,201
Posts801,893
Members40,066
| |
Most Online64,515
Apr 8th, 2026
|
|
|
|
|
|
|
|
|
Dansk
Deutsch - Windows
Español
Français - Windows
Italiano - Windows
Nederlands
Polski
Português
Svenskt
русский
Japanese
Simplified Chinese
Traditional Chinese
Korean