Hello! I have recently installed a new Universal Audio Volt 2 audio interface (AI) to replace my old Behringer AI. The Volt 2 works well with all my programs, Reaper, etc, everything sound related but not with Biab. I have installed the volt 2 according to instructions, and I have changed Biab preferences when changing from the Behringer to the Volt 2. I have attempted to do a A/B using both the Behringer and the Volt 2, but now neither of them work when I load a song.
The interesting thing I find is that when I first open Biab, but prior to loading a song there is a style pre- chosen, and a C chord in the music field. If I then start Biab I have sound using both the Behringer and the Volt 2. However if I load a SGU or Mgu song, no sound. The problem may have its origin around a month ago when I downloaded Windows 11, as I have been busy and do not recall if I have used Biab since the W 11 upgrade, but I do believe I have used it with the old AI Behringer. Still not 100% positive.
I have Biab 2021, unfortunately I can not find the build number.
Any and all help in resolving this issue is much appreciated.
When you say this: "The interesting thing I find is that when I first open Biab, but prior to loading a song there is a style pre- chosen, and a C chord in the music field. If I then start Biab I have sound using both the Behringer and the Volt 2."
Does it mean that you are running both sound cards on your computer and you control which sound card is used by settings in each program?
Thanks for a speedy reply. No, I should have clarified. That phenomenon applies to either AI, ie either Volt or Behringer, but not both being connected att the same time. Does that open a line of thought?
0zoro the volt is a nice interface. re biab the only way to advise is if you post a pic of your driver preferences for volt in biab. lets address this , then can proceed to other points. you might want to check if volt is multi client capable,,,if NOT and your useing another program with biab concurrently eg reaps (i'm a reaps user from day 1) and its useing asio then set biab drivers in biab to WAS.
check with uaaudio support if volt is multi client cos my brief google search yielded no info.
also consult the vids on this pg site and the bb manual re setting up a biab audio interface.
as i said posting your pics of biab driver prefs will help other pg users help you.
best om
Last edited by justanoldmuso; 04/09/2205:13 AM.
my songs....mixed for good earbuds...(fyi..my vocs on all songs..) https://soundcloud.com/alfsongs (90 songs created useing bb/rb) (lots of tips of mine in pg tips forum.)
please tell me in reaps under the x top right hand what does reaper report as the volt stats ? eg asio latency etc. ?
in addition in windows sound devices is volt default sound device ?
om
Last edited by justanoldmuso; 04/09/2207:36 AM.
my songs....mixed for good earbuds...(fyi..my vocs on all songs..) https://soundcloud.com/alfsongs (90 songs created useing bb/rb) (lots of tips of mine in pg tips forum.)
Do you mean "file manager" in Biab? W11 has no File manager, if there is one in Baib it has been well concealed from my eyes. On the other hand my wife claims that it must be in front of me to be discovered?! I have taken a screen shoot of the settings in Biab. No anount of coaxing or dragging and dropping has allowed me to put in in my reply. Is there another method?
Yes, Windows has the Volt as default.
Reaper has sample rate: 44100 hz Buffer size: 256 ~7.3/7.5 ms ASIO 24 bit wave 2/2 channels
Sorry if I appear unresponsive, long latency in response, I am working between replies and soon it is time for me to go to bed. will check in early tomorrow.
0zoro
ps the Reaper stats are the same that Biab shows but in addition show:
input data format: Int32LSB output data format: Int32LSB ASIO active (PCM mode)
You must use replay to get to the file manager, there is no file manager in quick reply. You must first take a picture or print screen and save it as a jpg, then just follow the instructions in the file manager.
Last edited by MarioD; 04/09/2209:35 AM.
The bumper sticker said "I'm a veterinarian, therefore I can drive like an animal". Suddenly I realized how many proctologists are on the road.
64 bit Win 10 Pro, the latest BiaB/RB, Roland Octa-Capture audio interface, a ton of software/hardware
no no...you post pics useing this forum software. when you reply to a post like i'm replying to you. look at the bottom before pressing submit button under the reply. (notice marios post above...thanks mate )
if biab is set to asio AND reaps is set to ASIO AND both programs are open/operating at the same time, and you have probs try changeing the biab driver from asio to WAS.
it is very important that you get clarification from ua support as to if the volt is MULTICLIENT...i cant find info on this aspect of the volt
om
Last edited by justanoldmuso; 04/09/2209:44 AM.
my songs....mixed for good earbuds...(fyi..my vocs on all songs..) https://soundcloud.com/alfsongs (90 songs created useing bb/rb) (lots of tips of mine in pg tips forum.)
We have this wonderful video that goes over how to set up an audio interface and how to troubleshoot it. Let us know if you need anything further!
Excellent video! Clear, to the point, no distractions, no deviations.
An index to the main sections would be good, but it doesn't look too hard to navigate without one. Big headings help.
Very nicely done indeed.
Jazz relative beginner, starting at a much older age than was helpful. AVL:MXE Linux; Windows 11 BIAB2026 Audiophile, a bunch of other software. Kawai MP6, Ui24R, Focusrite Saffire Pro40 and Scarletts .
BIAB & RB2026 Win.(Audiophile), Windows 10 Pro & Windows 11, Cakewalk Bandlab, Izotope Prod.Bundle, Roland RD-1000, Synthogy Ivory, Session Keys Grand S & Electric R, Kontakt, Focusrite 18i20, KetronSD2, NS40M, Pioneer Active Monitors.
I have enclosed my Biab settings in a jpg file entitled audio settings. They correlate well my Reaper AI settings listed below as text.
I am currently inquiring in to whether Volt is multi client capable. The jury is still out on that question but I have not attempted to run Biab and Reaper at the same time. On the other hand I do run vids etc from my music teacher at the same time as Baib. I suppose this could be an eventuel multi client conflict if Volt can not handle the load?
I have Biab 2021, unfortunately I can not find the build number.
Go to Help > About Band-In-A-Box. The build number is in brackets following the "Version 2021" info.
BIAB & RB2026 Win.(Audiophile), Windows 10 Pro & Windows 11, Cakewalk Bandlab, Izotope Prod.Bundle, Roland RD-1000, Synthogy Ivory, Session Keys Grand S & Electric R, Kontakt, Focusrite 18i20, KetronSD2, NS40M, Pioneer Active Monitors.
that was a great method of saving your preferences for future reference. There are so many preferences in all programs used, and I spend so much time trouble shooting problems because I dont have a record. Do you have a method of enlarging your screen shots for reference purposes? Those pics were rather small.
Do you have a method of enlarging your screen shots for reference purposes? Those pics were rather small.
These are all high res screen shots which will permit zoom-in for clear viewing.
Just to be clear, BIAB = MME and my DAW Reaper= ASIO. WAS has always been a problem for me in BIAB. And while BIAB and my MOTU ASIO work well together other folks have reported ASIO issues with BIAB. Including the fact that ASIO is generally one use at a time.
Musicstudent. no probs here with biab WAS setting. its a weird old daw world...lol. so far i'm very happy with the audient drivers. not given me one problem in reaps (asio ) or biab. ....or rb...zilch nada in one year of use. also audient latency in reaps is 4ms...and i could get that lower if i wished...so i'm a happy lad.
0zoro if the volt is NOT multi client AND your running biab with that video application at the same time this "might " be the source of your problem if the vid teaching app is useing the asio driver. best way to check is to close/exit the video app... and then see if biab operates fine. from your graphic your useing asio driver in biab. THUS if the volt isnt multiclient ...and you want to use the vid app at same time... run a test changeing biab from asio driver to WAS driver and see if that works.
the problem , as many have noted is that asio "is a one trick pony"...ie only one music app at a time if the drivers arent multi client.
in conclusion try running biab with WAS driver and not asio.
best om
Last edited by justanoldmuso; 04/10/2209:42 AM.
my songs....mixed for good earbuds...(fyi..my vocs on all songs..) https://soundcloud.com/alfsongs (90 songs created useing bb/rb) (lots of tips of mine in pg tips forum.)
I have changed the driver in Baib from ASIO to WAS. I now have sound! I have double checked with several songs both MGU and SGU, of these one particular song (and unfortunately the song was newly downloaded thus the one where I first discovered the sound issue) seems to be a bit wonky in that it will sometimes play one time only, or not at all. The ASIO drive seems not work with the Volt AI, though ASIO did work with my previous Behringer AI with no problem. This pleasure of having sound is now so new that I have not had the opportunity or time to discern whether the WAS drive affects the sound quality on Biab or not. While this puzzles me, it works and I see no present cause for further endeavor.
I would now like to thank you all for various reflexions, ideas, analytical suggestions (especially based on my somewhat sketchy problem description), and of course support!
That's great! Please consider to open your original post and mark it as "Resolved" (there's a button for that). This can help others in the future who may have the same / similar issue.
BIAB & RB2026 Win.(Audiophile), Windows 10 Pro & Windows 11, Cakewalk Bandlab, Izotope Prod.Bundle, Roland RD-1000, Synthogy Ivory, Session Keys Grand S & Electric R, Kontakt, Focusrite 18i20, KetronSD2, NS40M, Pioneer Active Monitors.
Band-in-a-Box® 2025 for Mac® users: Build 904 now available!
If you're already using Band-in-a-Box® 2025 for Mac®, make sure to grab the latest update! Build 904 is now available for download and includes the newest additions and enhancements from our team.
PowerTracks 2026 is here—bringing powerful new enhancements designed to make your production workflow faster, smoother, and more intuitive than ever.
The enhanced Mixer now shows Track Type and Instrument icons for instant track recognition, while a new grid option simplifies editing views. Non-floating windows adopt a modern title bar style, replacing the legacy blue bar.
The Master Volume is now applied at the end of the audio chain for consistent levels and full-signal master effects.
Tablature now includes a “Save bends when saving XML” option for improved compatibility with PG Music tools. Plus, you can instantly match all track heights with a simple Ctrl-release after resizing, and Add2 chords from MGU/SGU files are now fully supported... and more!
Get started today—first-time packages start at just $49.
Already using PowerTracks Pro Audio? Upgrade for as little as $29 and enjoy the latest improvements!
Band-in-a-Box 2026 for Windows Special Offers End Tomorrow (January 15th, 2026) at 11:59 PM PST!
Time really is running out! Save up to 50% on Band-in-a-Box® 2026 for Windows® upgrades and receive a FREE Bonus PAK—only when you order by 11:59 PM PST on Thursday, January 15, 2026!
We've added many major new features and new content in a redesigned Band-in-a-Box® 2026 for Windows®!
Version 2026 introduces a modernized GUI redesign across the program, with updated toolbars, refreshed windows, smoother workflows, and a new Dark Mode option. There’s also a new side toolbar for quicker access to commonly used windows, and the new Multi-View feature lets you arrange multiple windows as layered panels without overlap, making it easier to customize your workspace.
Another exciting new addition is the new AI-Notes feature, which can transcribe polyphonic audio into MIDI. You can view the results in notation or play them back as MIDI, and choose whether to process an entire track or focus on specific parts like drums, bass, guitars/piano, or vocals. There's over 100 new features in Band-in-a-Box® 2026 for Windows®.
There's an amazing collection of new content too, including 202 RealTracks, new RealStyles, MIDI SuperTracks, Instrumental Studies, “Songs with Vocals” Artist Performance Sets, Playable RealTracks Set 5, two RealDrums Stems sets, XPro Styles PAK 10, Xtra Styles PAK 21, and much more!
Upgrade your Band-in-a-Box for Windows to save up to 50% on most Band-in-a-Box® 2026 upgrade packages!
Plus, when you order your Band-in-a-Box® 2026 upgrade during our special, you'll receive a Free Bonus PAK of exciting new add-ons.
If you need any help deciding which package is the best option for you, just let us know. We are here to help!
Band-in-a-Box® 2026 for Windows® Special Offers Extended Until January 15, 2026!
Good news! You still have time to upgrade to the latest version of Band-in-a-Box® for Windows® and save. Our Band-in-a-Box® 2026 for Windows® special now runs through January 15, 2025!
We've packed Band-in-a-Box® 2026 with major new features, enhancements, and an incredible lineup of new content! The program now sports a sleek, modern GUI redesign across the entire interface, including updated toolbars, refreshed windows, smoother workflows, a new dark mode option, and more. The brand-new side toolbar provides quicker access to key windows, while the new Multi-View feature lets you arrange multiple windows as layered panels without overlap, creating a flexible, clutter-free workspace. We have an amazing new “AI-Notes” feature. This transcribes polyphonic audio into MIDI so you can view it in notation or play it back as MIDI. You can process an entire track (all pitched instruments and drums) or focus on individual parts like drums, bass, guitars/piano, or vocals. There's an amazing collection of new content too, including 202 RealTracks, new RealStyles, MIDI SuperTracks, Instrumental Studies, “Songs with Vocals” Artist Performance Sets, Playable RealTracks Set 5, two RealDrums Stems sets, XPro Styles PAK 10, Xtra Styles PAK 21, and much more!
There are over 100 new features in Band-in-a-Box® 2026 for Windows®.
When you order purchase Band-in-a-Box® 2026 before 11:59 PM PST on January 15th, you'll also receive a Free Bonus PAK packed with exciting new add-ons.
Upgrade to Band-in-a-Box® 2026 for Windows® today! Check out the Band-in-a-Box® packages page for all the purchase options available.
One of our representatives will be happy to help you over the phone. Our hours of operation are from
6:00AM to 6:00PM PST (GMT -8) Monday thru Friday, and 8:00AM to 4:00PM PST Saturday. We are closed Sunday. You can also send us your questions via email.
One of our representatives will be happy to help you on our Live Chat or by email. Our hours of operation are from
6:00AM to 6:00PM PST (GMT -8) Monday thru Friday; 8:00AM to 4:00PM PST (GMT -8) Saturday; Closed Sunday.
Dansk
Deutsch - Windows
Español
Français - Windows
Italiano - Windows
Nederlands
Polski
Português
Svenskt
русский
Japanese
Simplified Chinese
Traditional Chinese
Korean