I removed the 1 gig of ram and installed a 2 gig chip. This one came out so easily.
I used this YouTube tutorial:
https://www.youtube.com/watch?v=qKUi0nQFPSw

The only little problem I had was figuring out how to get the bottom panel door open.
Here are my notes on the problem:
I unscrewed the 2 screws holding the door.
They clicked and didn't unscrew totally or easily because on the inside there was a washer of some sort.
Then when they were both unscrewed the door didn't seem to come up.
I discovered there were 2 side notches along with the 2 back notches that needed to be carefully handled. Midway up the left and right side was a slot that needed to be pressed or moved slightly for the cover to be opened and then resettled in the correct place when putting the cover back on.
__________________________________________________
Now I think the start up time is quicker with the 2 gig Ram install. It seems so fast on both startup and shut down.

Not sure what else might be improved yet.