Quote:


It seems to me that BIAB and the Kurz were working before, and if you consider the Kurz instruments are coming through BIAB currently, it is still kinda, sorta, maybe working.

Can it be too serious?


Shouldn't be serious at all. Kudos to all the great advice you've been getting, especially Bob's, but seems to me you'd benefit by stripping this down to the bare essentials. Try this:

1. Remove the audio cables from the Kurz completely.
2. Midi the Kurz to the sound card/interface as you had it when it was working.
3. Pull up the MIDI MONITOR in BiaB, and check that it is registering note and controller transmissions from the Kurz.

If it is, it should work if you've properly configured BB and the sound source in the computer as you say was the case after working with support. If no midi signals are getting to the computer, suspect the cables. Maybe switch em around if there's no spare, 'cause right now, all you want is MIDI out from the Kurz to MIDI in on your interface. (When you run over cables with your desk chair casters, as I do all the time, there's a tad tendency they'll quit on ya. )

The BB Midi Monitor by default is a button on the right side of the lower tool bar. If you're unfamiliar with it, press the help link on it. The important thing for now is to make sure the filter is letting through all the events.

HTH. Post back. -Ron