Quote:

BUMP! i have had a good look on the web at the 1010lt sound card....where does the guitar input to?one of those trailing leads?

i have noticed that with the BX5A speakers there is no enclosed cable connections....what are they,what is it i need,standard 1/4" guitar jack connection cables?



You'll want to run the guitar through some kind of FX pedal, amp or preamp to boost the signal (and get FX)
Then you can run the line level signal from the Line Out of that device to one of the rca inputs. I often use quality RCA cable with a 1/4" adapter on one end to plug into the the FX box, or amp's Line Out.

The BX8a connect by either 1/4" cable (balanced or unbalanced) or by XLR, (I assume BX5a is the same). So it depends on what you are sending from.
For the 1010lt connection to the monitors again I will often use a high quality RCA cable with a 1/4" adapter on one end. Those RCA cables are thick and well coated. Monster brand or equal used here because of the amount of use.

I do not work here, but the benefits are still awesome
Make your sound your own!