|
Log in to post
|
Print Thread |
|
|
|
|
|
RealBand
|
Joined: Aug 2011
Posts: 12
Newbie
|
OP
Newbie
Joined: Aug 2011
Posts: 12 |
Checked forums- I've noticed that when mixing (MIDI channels using the realband mixer) that track volumes never do "return" to peak loudness (127) when pushed up after lowering volume slider, even though the channel says it's a t 127. EXAMPLE: Set up a MIDI song (doesn't matter) Grab a channel in the mixer (or for that matter on the channel strip) lower it and , in my case although the slider can be pushed back up to max, the volume on the VST never returns to max, only about 80%. I can graphicly see this, say I'm using Hypersonic as my VST, I can watch,even though i start out a channel on Hypersonic at max, when i use the realband mixer to adjust the volume down and then back up, Hypersonics volums follows the realband mixer down and back up to about 80% and then does not go any further even though i've maxed out the slider in the realband mixer. This happens on any channel. My thought is that the control #'s are not tracking or matching up correctly, but have no idea why this would be happening. just curious if any else has seen signs of this, as it makes mixing pretty well impossible. Doesn't seem to matter which VST I use.
While I'm here- the "boost" dialog on each channel, when changed, seems to affect EVERY channel that is using the same VST for a sound source. I'm assuming this is supposed to happen,I would think it would boost the individual channel, regardless of connection, to be really an effective tool. EDIT/ADDED Goofed around a bit more and discovered that the MASTER VOLUME in the tool bar seems to have to be at 100% for the individual sliders to return to max. Say I have the MASTER VOLUME (in the toolbar) at 75%. Seems that if the original track volume is above that when the song starts it's O.K. but if you tweak the volume below that of the MASTER, it will not agasin go above the MASTER setting.That does "solve" my issue,but is this a normal function?
Last edited by bob1474; 10/29/11 09:10 AM.
|
|
|
|
|
|
|
|
|
|
|
|
|
RealBand
|
Joined: Aug 2006
Posts: 8,498
Veteran
|
|
Veteran
Joined: Aug 2006
Posts: 8,498 |
Hey Bob, Woos that in your avatar?
Never .. ever .. drink this much coffee!
HP Win 11 12 gig ram, Mac mini Sonoma with 16 gig of ram, BiaB 2025, Realband, Reaper 7, Harrison Mixbus 9 32c , Melodyne 5 editor, Presonus Audiobox 1818VSL, Presonus control app.
|
|
|
|
|
|
|
|
|
|
|
|
|
RealBand
|
Joined: May 2003
Posts: 8,021
Veteran
|
|
Veteran
Joined: May 2003
Posts: 8,021 |
Yeah. That Master volume thing is a queer little duck.You'll see that most of us set it at max and leave it there.It has no practical use.The only thing about it is that it's setting is not saved with the song. If you need to lower your volume at a gig you can pull this down and all songs will be lowered proportionally. You could pull the fader down on your mixer as well or turn the volume down on your powered speakers. No real use IMHO
|
|
|
|
|
|
|
|
|
|
|
|
|
RealBand
|
Joined: Mar 2009
Posts: 272
Apprentice
|
|
Apprentice
Joined: Mar 2009
Posts: 272 |
Quote:
Checked forums- I've noticed that when mixing (MIDI channels using the realband mixer) that track volumes never do "return" to peak loudness (127) when pushed up after lowering volume slider, even though the channel says it's a t 127. EDIT/ADDED Goofed around a bit more and discovered that the MASTER VOLUME in the tool bar seems to have to be at 100% for the individual sliders to return to max. Say I have the MASTER VOLUME (in the toolbar) at 75%. Seems that if the original track volume is above that when the song starts it's O.K. but if you tweak the volume below that of the MASTER, it will not agasin go above the MASTER setting.That does "solve" my issue,but is this a normal function?
Ok, that explains an issue I've always had using Sampletank with RB. Could never figure out why Sampletank instruments would not follow the volume setting I had in the individual RB track if it were set to max; would always kick over to some lesser number in Sampletank once I hit play. Never considered the Master Volume setting; assumed that it would have no effect on sending the track volume setting. Makes sense now, thanks, although I don't think it should function this way.
I also wish PG would make a change so that Master Volume setting would save with the other song settings. I've made a request for this in the wishlist.
Terry
BIAB/RB 2018 PlusPak. Dell Inspiron23 running Win10, 12GB RAM, 2.5GHz i7, Presonus AudioBox USB interface.
|
|
|
|
|
|
|
|
|
|
|
|
|
RealBand
|
Joined: Aug 2011
Posts: 12
Newbie
|
|
OP
Newbie
Joined: Aug 2011
Posts: 12 |
Glad to hear at least I'm not crazy. for shure I'll just leave it maxed and adjust the songs as needed. I agree-just is a strange way to do it.
Robh- Found him in my yard here in FL, nursed him back to health, let him go and still see him time to time. Never ever drink that many Marguaritas!! thanks for the reply, guys!!
|
|
|
|
|
|
|
|
|
|
|
|
|
RealBand
|
Joined: Jul 2000
Posts: 3,161
Veteran
|
|
Veteran
Joined: Jul 2000
Posts: 3,161 |
If you are refering to the volumn slider in the ALL column then this is very useful in the context of Mixing tracks. I find that when finalising a Mix and my final Compressor (Triple Comp)indicates clipping then I can lower the ALL slider to lower all the tracks below this level and retain the existing dynamics.
|
|
|
|
|
|
|
|
|
|
|
|
|
RealBand
|
Joined: Jan 2003
Posts: 5,119
Veteran
|
|
Veteran
Joined: Jan 2003
Posts: 5,119 |
Are you using MME or ASIO drivers? Could there be an effect, like "Peak Limit / Dynamics" or something set globally running in the background? That would explain why the volume level is not returning 100%, some compressor / dynamic leveling happening we don't see?
I know if I set my driver to ASIO, and have it set to a "priority" type when listening to anything wave related on my lappy, I think the PG Peak Limit also runs "globally" along with the driver. Not 100%, but there is a difference in db's when set to ASIO.
Trax
|
|
|
|
|
|
|
|
|
|
|
|
|
RealBand
|
Joined: May 2003
Posts: 8,021
Veteran
|
|
Veteran
Joined: May 2003
Posts: 8,021 |
Quote:
Are you using MME or ASIO drivers? Could there be an effect, like "Peak Limit / Dynamics" or something set globally running in the background? That would explain why the volume level is not returning 100%, some compressor / dynamic leveling happening we don't see?
I know if I set my driver to ASIO, and have it set to a "priority" type when listening to anything wave related on my lappy, I think the PG Peak Limit also runs "globally" along with the driver. Not 100%, but there is a difference in db's when set to ASIO.
Trax
That's because ASIO bypasses all of the Windows mixer stuff.
|
|
|
|
|
|
|
|
|
|
|
|
|
RealBand
|
Joined: Aug 2011
Posts: 12
Newbie
|
|
OP
Newbie
Joined: Aug 2011
Posts: 12 |
Hi LynB- No- I'm talking about the Master Volume slider in the toolbar.It "brick walls" any volume settings on any channel if it's not at max. Hi- Muzic Trax- Silvertones. I'm using ASIO drivers (tascam us800) with no effects applied anywhere in the chain. As explained above-when the Master volume of Realband is set to max, all is fine. I haven't yet had time to play around to see if any other setting combinations might be causing this quirky action to appear, but i would think that it would not be a "built in" feature to act this way. thanks for the input- I'm shure we'll get to the bottom of this sometime, not a show stopper, but a very curious blip.
Last edited by bob1474; 11/09/11 03:58 PM.
|
|
|
|
|
|
|
|
|
|
|
|
|
RealBand
|
Joined: May 2000
Posts: 22,161
Veteran
|
|
Veteran
Joined: May 2000
Posts: 22,161 |
It's a good thing to notice. It also affects any 'written' files, like merge downs, so that is why you see most long time users suggest leaving that slider (and the All slider) all the way up in day to day use. Especially when recording/mixing/mastering.
I do not work here, but the benefits are still awesome
Make your sound your own!
|
|
|
|
|
|
|
|
|
|
|
|
|
RealBand
|
Joined: Jul 2000
Posts: 3,161
Veteran
|
|
Veteran
Joined: Jul 2000
Posts: 3,161 |
Hi Bob,
The ALL Slider and the Master Slider in the Toolbar are linked and have the same effect.
|
|
|
|
|
|
|
|
|
|
|
|
|
RealBand
|
Joined: May 2000
Posts: 22,161
Veteran
|
|
Veteran
Joined: May 2000
Posts: 22,161 |
I meant the All slider and the slider in the main output section of mixer (A1 usually). These are different.
I do not work here, but the benefits are still awesome
Make your sound your own!
|
|
|
|
|
|
|
|
|
|
|
|
|
RealBand
|
Joined: Jul 2000
Posts: 3,161
Veteran
|
|
Veteran
Joined: Jul 2000
Posts: 3,161 |
|
|
|
|
|
|
|
|
|
|
|
|
Ask sales and support questions about Band-in-a-Box using natural language.
ChatPG's knowledge base includes the full Band-in-a-Box User Manual and sales information from the website.
|
|
|
|
|
|
|
|
|
|
|
Video: Band-in-a-Box® 2025 for Mac®: VST3 Plugin Support
Band-in-a-Box® 2025 for Mac® now includes support for VST3 plugins, alongside VST and AU. Use them with MIDI or audio tracks for even more creative possibilities in your music production.
Band-in-a-Box® 2025 for Macs®: VST3 Plugin Support
Video: Band-in-a-Box® 2025 for Mac®: Using VST3 Plugins
Join the conversation on our forum.
Band-in-a-Box 2025 for Mac Videos
With the release of Band-in-a-Box® 2025 for Mac, we’re rolling out a collection of brand-new videos on our YouTube channel. We’ll also keep this forum post updated so you can easily find all the latest videos in one convenient spot.
From overviews of new features and walkthroughs of the 202 new RealTracks, to highlights of XPro Styles PAK 8, Xtra Styles PAKs 18, the 2025 49-PAK, and in-depth tutorials — you’ll find everything you need to explore what’s new in Band-in-a-Box® 2025.
Reference this forum post for One-Stop Shopping of our Band-in-a-Box® 2025 Mac Videos — we’ll be adding more videos as they’re released!
Band-in-a-Box 2025 for Mac is Here!
Band-in-a-Box® 2025 for Mac is here, packed with major new features and an incredible collection of available new content! This includes 202 RealTracks (in Sets 449-467), plus 20 bonus Unreleased RealTracks in the 2025 49-PAK. There are new RealStyles, MIDI SuperTracks, Instrumental Studies, “Songs with Vocals” Artist Performance Sets, Playable RealTracks Set 4, two new sets of “RealDrums Stems,” XPro Styles PAK 8, Xtra Styles PAK 19, and more!
Special Offers
Upgrade to Band-in-a-Box® 2025 for Mac with savings of up to 50% on most upgrade packages during our special—available until July 31, 2025! Visit our Band-in-a-Box® packages page for all the purchase options available.
2025 Free Bonus PAK & 49-PAK Add-ons
We've packed our Free Bonus PAK & 49-PAK with some incredible Add-ons! The Free Bonus PAK is automatically included with most Band-in-a-Box® for Mac 2025 packages, but for even more Add-ons (including 20 Unreleased RealTracks!) upgrade to the 2025 49-PAK for only $49. You can see the full lists of items in each package, and listen to demos here.
If you have any questions, feel free to connect with us directly—we’re here to help!
Band-in-a-Box 2025 Italian Version is Here!
Cari amici
È stata aggerate la versione in Italiano del programma più amato dagli appassionati di musica, il nostro Band-in-a-Box.
Questo è il link alla nuova versione 2025.
Di seguito i link per scaricare il pacchetti di lingua italiana aggiornati per Band-in-a-Box e RealBand, anche per chi avesse già comprato la nuova versione in inglese.
Band-in-a-Box 2025 - Italiano
RealBand 2025 - Italiano
Band-in-a-Box 2025 French Version is Here!
Bonjour à tous,
Band-in-a-Box® 2025 pour Windows est disponible en Français.
Le téléchargement se fait à partir du site PG Music
Pour ceux qui auraient déjà acheté la version 2025 de Band-in-a-Box (et qui donc ont une version anglaise), il est possible de "franciser" cette version avec les patchs suivants:
BIAB 2025 - francisation
RealBand 2025 - francisation
Voilà, enjoy!
Band-in-a-Box 2025 German Version is Here!
Update Your Band-in-a-Box® 2025 to Build 1128 for Windows Today!
Already using Band-in-a-Box 2025 for Windows®? Download Build 1128 now from our Support Page to enjoy the latest enhancements and improvements from our team.
Stay up to date—get the latest update now!
|
|
|
|
|
|
|
|
|
|
|
|
Forums58
Topics84,276
Posts777,236
Members39,608
| |
Most Online25,754
Jan 24th, 2025
|
|
|
|
|
|
|
|
|
Dansk
Deutsch - Windows
Español
Français - Windows
Italiano - Windows
Nederlands
Polski
Português
Svenskt
русский
Japanese
Simplified Chinese
Traditional Chinese
Korean