Quote:

Also, make sure you plug it into the same USB port every time. The TASCAM manual says you can use all the USB ports, but you have to do an initial install, then go to another port and let the driver re-install, then the next port until you've gone through all the USB ports. Once you do that, you can use it on any of your USB ports.


John is right, but installing the driver so it works on every USB port comes with a warning: you can run out of USB ports.

At least on Windows XP, this was a problem (I don't know if it still is in Windows 7). You may think you can't possibly have too many USB devices, but everything you ever plugged in, counts, and if you don't plug it into the same port every time, it adds to the count. The remedy is a convoluted series of steps to go into DOS, view the Device Manager, View Hidden Devices, and remove unused ones. It cannot be fixed from the regular Device Manager in Windows.

BIAB 2025 Win Audiophile. Software: Studio One 7 Pro, Swam horns, Acoustica-7, Notion 6, Song Master Pro, Win 11 Home. Hardware: Intel i9, 32 Gb; Roland Integra-7, Presonus 192 & Faderport 8, Royer 121, Adam Sub8 & Neumann 120 monitors.