Quote:

Basically, I think everything is working correctly now, except that the volume level on the "thru instrument" is not loud enough to play with a BIAB song that is playing. I have the "thru" volume on 127.



It does sound like you have it set up correctly. The volume issue may be caused by a couple of things. Check the following in order and see if it helps.

1) Go to 'Opt|midi audio driver setup'. Check that the box labeled 'route midi thru to midi driver' is NOT checked. This is really important here because if it IS checked the midi from your keys is going to a different synth which would explain the volume issue.

2) If that doesn't work, go to 'Opt|midi audio driver setup' again. Click the 'VST/DXi settings' button to get to the control panel for your synth. Carefully check for any volume sliders that aren't at the highest setting. Set them all to full volume anyway as that eliminates problems later.

3) If none of that works try a different patch. Some patches seem quieter than others.

If none of this helps then report back. That will help others diagnose the problem.

BiaB 2013 b366, RB 2013 b4, WinXP Pro SP3, Toshiba M70, 1.8GHz 2GB RAM 100GB HD. Focusrite Saffire 6 USB, Ketron SD2.BiaB Wiki