|
Log in to post
|
Print Thread |
|
|
|
|
|
Off-Topic
|
Joined: May 2003
Posts: 8,021
Veteran
|
OP
Veteran
Joined: May 2003
Posts: 8,021 |
I used to play on a hand saw but now with AT3 I thought I'd get an electric saw.  As a builder I know all about the good ones for lots of cash. I need just a small one. $200 or less for a small project. So Home Depot sells Ryobi & Lowe's sells Skill. Anyone have experience with either?
|
|
|
|
|
|
|
|
|
|
|
|
|
Off-Topic
|
Joined: May 2003
Posts: 8,021
Veteran
|
|
OP
Veteran
Joined: May 2003
Posts: 8,021 |
Sears also has one for $249
|
|
|
|
|
|
|
|
|
|
|
|
|
Off-Topic
|
Joined: Oct 2008
Posts: 1,259
Expert
|
|
Expert
Joined: Oct 2008
Posts: 1,259 |
I'm a woodworker, John. If the job is pretty small, you could get by with a benchtop model. If you need a bigger table saw, you could get a contractor's saw. I've only had a Delta and it was fine. I now have a Jet, but it's commercial grade with a 52" wing. If you're going to cut hardwood, such as oak or maple, you need a saw with some power or there will be burning. I've had a Skil chop saw that my son now has. It just keeps going and going. I now have an scms 10" makita that works great. Just mentioned that because of the brand. There are lots of saw brands out there now. FWIW
STan
Cornet Curmudgeon
|
|
|
|
|
|
|
|
|
|
|
|
|
Off-Topic
|
Joined: May 2000
Posts: 22,165
Veteran
|
|
Veteran
Joined: May 2000
Posts: 22,165 |
If they weren't so bulky I'd send you one. It'd probably cost me close to the same for shipping as it would for you to get a new one. I have no idea how I ended up with 4 or 5 table saws, but I did. Want one of those big cast iron belt driven Craftsmans? I'd help you move it just to reclaim some space.. I do have 2 small (10") skil tablesaws, and they aren't bad. Both still cut pretty well, but both also have a chunk missing from the plastic base/housing. It was a little thin to be thrown in the back of the truck so many times.
I like Ryobi too though. Don't have their tablesaw, but have 6 or 7 of their other tools and they took quite a beating back when I was building. I think they all still run. I'd give them a look too.
I bet the blade makes more of a difference than brand of saw here.
I do not work here, but the benefits are still awesome
Make your sound your own!
|
|
|
|
|
|
|
|
|
|
|
|
|
Off-Topic
|
Joined: Oct 2008
Posts: 1,259
Expert
|
|
Expert
Joined: Oct 2008
Posts: 1,259 |
"I bet the blade makes more of a difference than brand of saw here"
I totally agree, rharv. That and having adequate power. I've paid $130 for a good blade before. I still use it.
Cornet Curmudgeon
|
|
|
|
|
|
|
|
|
|
|
|
|
Off-Topic
|
|
Anonymous
Unregistered
|
|
Anonymous
Unregistered
|
The irony here is that if you are not careful with that table saw you will never make music again.... I lost a fight with a miter saw once that resulted in a 9 stitch cut on the back of my wrist.
Just a little tip for you from your Ol' Uncle Eddie here. The 2 red lines on a miter saw that say "DON'T EVER PUT YOUR HANDS BETWEEN THESE 2 RED LINES" include you. As much as I SWEAR there was a line on page 14 of the manual that said "We don't mean YOU Eddie".....
Held a piece of wood on the table with my hand, pulled down on the blade, 9 stitches later I learned my lesson.
|
|
|
|
|
|
|
|
|
|
|
|
|
Off-Topic
|
Joined: Jan 2002
Posts: 7,913
Veteran
|
|
Veteran
Joined: Jan 2002
Posts: 7,913 |
I use a ryobi table saw that my dad picked up from craigslist for 50 bucks.
|
|
|
|
|
|
|
|
|
|
|
|
|
Off-Topic
|
Joined: Aug 2006
Posts: 8,502
Veteran
|
|
Veteran
Joined: Aug 2006
Posts: 8,502 |
I bought a new Ryobi table saw about 5 years ago, been a very good one. i use almost all ryobi tools, especially the rechargable ones, better prices, decent tools, and the batteries are half of the others. I feel the dewalt, and makita stuff is a tiny bit better, but far more expensive. You can get a double pack or nicad batteries fro ryobi for $59, Makita is $99 each.
Last edited by Robh; 12/21/11 10:24 PM.
HP Win 11 12 gig ram, Mac mini Sonoma with 16 gig of ram, BiaB 2025, Realband, Reaper 7, Harrison Mixbus 9 32c , Melodyne 5 editor, Presonus Audiobox 1818VSL, Presonus control app.
|
|
|
|
|
|
|
|
|
|
|
|
|
Off-Topic
|
Joined: May 2000
Posts: 22,165
Veteran
|
|
Veteran
Joined: May 2000
Posts: 22,165 |
I once bought a battery for a pickup truck and a battery for a dewalt cordless drill on the same day. Guess which one cost more. .. that is when I stopped buying dewalt.
I do not work here, but the benefits are still awesome
Make your sound your own!
|
|
|
|
|
|
|
|
|
|
|
|
|
Off-Topic
|
Joined: Oct 2008
Posts: 8,075
Veteran
|
|
Veteran
Joined: Oct 2008
Posts: 8,075 |
when I read the title of the thread, I thought maybe you were going to take samples of the various sawing sounds and make a song with loops of those sounds.
Which you could.
|
|
|
|
|
|
|
|
|
|
|
|
|
Off-Topic
|
Joined: May 2003
Posts: 8,021
Veteran
|
|
OP
Veteran
Joined: May 2003
Posts: 8,021 |
Quote:
The irony here is that if you are not careful with that table saw you will never make music again.... I lost a fight with a miter saw once that resulted in a 9 stitch cut on the back of my wrist.
Just a little tip for you from your Ol' Uncle Eddie here. The 2 red lines on a miter saw that say "DON'T EVER PUT YOUR HANDS BETWEEN THESE 2 RED LINES" include you. As much as I SWEAR there was a line on page 14 of the manual that said "We don't mean YOU Eddie".....
Held a piece of wood on the table with my hand, pulled down on the blade, 9 stitches later I learned my lesson.
I know it can happen however I was a self employed builder, and had no employees, for 25 years so I do know all the pitfalls. I always had more professional tools. I don't need that now. I have one project I need to make. A small wooden container for my wife's ashes. She's really PO that I still have her in a plastic box.
|
|
|
|
|
|
|
|
|
|
|
|
|
Off-Topic
|
Joined: Aug 2006
Posts: 8,502
Veteran
|
|
Veteran
Joined: Aug 2006
Posts: 8,502 |
The $99 Ryobi is nice, the $199 is real nice. Either will build a box. I have been in building for 38 years, and like John i know what a "real" top end saw is like, but hey i only do hobby jobs now and again now days, so a small portable is fine.
Man do you really have to be careful though.
HP Win 11 12 gig ram, Mac mini Sonoma with 16 gig of ram, BiaB 2025, Realband, Reaper 7, Harrison Mixbus 9 32c , Melodyne 5 editor, Presonus Audiobox 1818VSL, Presonus control app.
|
|
|
|
|
|
|
|
|
|
|
|
|
Off-Topic
|
Joined: Mar 2004
Posts: 6,706
Veteran
|
|
Veteran
Joined: Mar 2004
Posts: 6,706 |
John,
When I am not pulling on guitar strings we are manufacturing Solar Screens and cut a whole lot of aluminum frame. I use a 10" Ryobis in my shop and a little 7.5 inch for on-site adjustments. All have given us remarkable service, in fact the little 7.5" has been wet on several occasions and really takes a beating in transport in the back of a pick-up everyday and it just keeps working. I think I paid under 100.00 for the saw and the portable stand a couple of years ago . . . I am a very satisfied customer.
Hope this helps.
Merry Christmas,
|
|
|
|
|
|
|
|
|
|
|
|
|
Off-Topic
|
Joined: Mar 2004
Posts: 6,706
Veteran
|
|
Veteran
Joined: Mar 2004
Posts: 6,706 |
Quote:
when I read the title of the thread, I thought maybe you were going to take samples of the various sawing sounds and make a song with loops of those sounds.
Which you could.
So did I! I could not wait to hear the final production.
Merry Christmas,
|
|
|
|
|
|
|
|
|
|
|
|
|
Off-Topic
|
|
Anonymous
Unregistered
|
|
Anonymous
Unregistered
|
Quote:
when I read the title of the thread, I thought maybe you were going to take samples of the various sawing sounds and make a song with loops of those sounds.
Sawlent Night?
|
|
|
|
|
|
|
|
|
|
|
|
|
Off-Topic
|
Joined: Jun 2000
Posts: 2,217
Veteran
|
|
Veteran
Joined: Jun 2000
Posts: 2,217 |
Did you hear about the folk singer who was convicted of murder?
The judge sent her to the acoustic chair.
|
|
|
|
|
|
|
|
|
|
|
|
|
Off-Topic
|
Joined: May 2003
Posts: 8,021
Veteran
|
|
OP
Veteran
Joined: May 2003
Posts: 8,021 |
The saw I wanted that fit all of my needs for now and some future projects ( speaker boxes) was the Ryobi RTS30 I saw at Home Depot. It was $300. A little more then I wanted to pay. I came home and thought I'd look on line for a better price. I found it for $250. Guess where? Home Depot. I went back and showed them and the Manager of the Dept. gave it to me for $250.
|
|
|
|
|
|
|
|
|
|
|
|
|
Off-Topic
|
Joined: May 2000
Posts: 22,165
Veteran
|
|
Veteran
Joined: May 2000
Posts: 22,165 |
Keep your fingers away from the blade. Push 'down' as you push forward (table saws kick up and at you at the back of the blade if the guide pinches or the wood warps from the relief of the cut by binding) Having a piece of wood tossed at you is no fun. I've been hit from across the room when someone else was using the saw. Have fun! Make cool stuff. 
I do not work here, but the benefits are still awesome
Make your sound your own!
|
|
|
|
|
|
|
|
|
|
|
|
Ask sales and support questions about Band-in-a-Box using natural language.
ChatPG's knowledge base includes the full Band-in-a-Box User Manual and sales information from the website.
|
|
|
|
|
|
|
|
|
|
|
Video: Band-in-a-Box® 2025 for Mac®: VST3 Plugin Support
Band-in-a-Box® 2025 for Mac® now includes support for VST3 plugins, alongside VST and AU. Use them with MIDI or audio tracks for even more creative possibilities in your music production.
Band-in-a-Box® 2025 for Macs®: VST3 Plugin Support
Video: Band-in-a-Box® 2025 for Mac®: Using VST3 Plugins
Join the conversation on our forum.
Band-in-a-Box 2025 for Mac Videos
With the release of Band-in-a-Box® 2025 for Mac, we’re rolling out a collection of brand-new videos on our YouTube channel. We’ll also keep this forum post updated so you can easily find all the latest videos in one convenient spot.
From overviews of new features and walkthroughs of the 202 new RealTracks, to highlights of XPro Styles PAK 8, Xtra Styles PAKs 18, the 2025 49-PAK, and in-depth tutorials — you’ll find everything you need to explore what’s new in Band-in-a-Box® 2025.
Reference this forum post for One-Stop Shopping of our Band-in-a-Box® 2025 Mac Videos — we’ll be adding more videos as they’re released!
Band-in-a-Box 2025 for Mac is Here!
Band-in-a-Box® 2025 for Mac is here, packed with major new features and an incredible collection of available new content! This includes 202 RealTracks (in Sets 449-467), plus 20 bonus Unreleased RealTracks in the 2025 49-PAK. There are new RealStyles, MIDI SuperTracks, Instrumental Studies, “Songs with Vocals” Artist Performance Sets, Playable RealTracks Set 4, two new sets of “RealDrums Stems,” XPro Styles PAK 8, Xtra Styles PAK 19, and more!
Special Offers
Upgrade to Band-in-a-Box® 2025 for Mac with savings of up to 50% on most upgrade packages during our special—available until July 31, 2025! Visit our Band-in-a-Box® packages page for all the purchase options available.
2025 Free Bonus PAK & 49-PAK Add-ons
We've packed our Free Bonus PAK & 49-PAK with some incredible Add-ons! The Free Bonus PAK is automatically included with most Band-in-a-Box® for Mac 2025 packages, but for even more Add-ons (including 20 Unreleased RealTracks!) upgrade to the 2025 49-PAK for only $49. You can see the full lists of items in each package, and listen to demos here.
If you have any questions, feel free to connect with us directly—we’re here to help!
Band-in-a-Box 2025 Italian Version is Here!
Cari amici
È stata aggerate la versione in Italiano del programma più amato dagli appassionati di musica, il nostro Band-in-a-Box.
Questo è il link alla nuova versione 2025.
Di seguito i link per scaricare il pacchetti di lingua italiana aggiornati per Band-in-a-Box e RealBand, anche per chi avesse già comprato la nuova versione in inglese.
Band-in-a-Box 2025 - Italiano
RealBand 2025 - Italiano
Band-in-a-Box 2025 French Version is Here!
Bonjour à tous,
Band-in-a-Box® 2025 pour Windows est disponible en Français.
Le téléchargement se fait à partir du site PG Music
Pour ceux qui auraient déjà acheté la version 2025 de Band-in-a-Box (et qui donc ont une version anglaise), il est possible de "franciser" cette version avec les patchs suivants:
BIAB 2025 - francisation
RealBand 2025 - francisation
Voilà, enjoy!
Band-in-a-Box 2025 German Version is Here!
Update Your Band-in-a-Box® 2025 to Build 1128 for Windows Today!
Already using Band-in-a-Box 2025 for Windows®? Download Build 1128 now from our Support Page to enjoy the latest enhancements and improvements from our team.
Stay up to date—get the latest update now!
|
|
|
|
|
|
|
|
|
|
|
|
Forums58
Topics84,303
Posts777,513
Members39,612
| |
Most Online25,754
Jan 24th, 2025
|
|
|
|
|
|
|
|
|
Dansk
Deutsch - Windows
Español
Français - Windows
Italiano - Windows
Nederlands
Polski
Português
Svenskt
русский
Japanese
Simplified Chinese
Traditional Chinese
Korean