Previous Thread
Index
Next Thread
Print Thread
Go To
RealBand
Joined: Mar 2010
Posts: 264
R
rokq22 Offline OP
Apprentice
OP Offline
Apprentice
R
Joined: Mar 2010
Posts: 264
Okay, I'm currently on tutorial #3 ("Real Band Part 2") but taking a short break.

What I'd like to know is what various kinds of interfaces are being used by folks around here with their RealBand recordings. I just bought a "Line 6 UX1" on eBay for $75 and so far so good. That is, I've installed everything and, apparently, everything (meaning the unit and the software) is a go. My next step will be to actually plug my microphone and guitar into the UX1 to see if the unit works properly with my instruments! However, I'm holding off for the remainder of the day because I want to enjoy the rest of the day. (Which I wouldn't enjoy if something malfunctions. But I'll worry about that tomorrow. )

Anyhow, so what type of interface are you using to record with? Was it a hassle getting it to work with RealBand or did the program work without hassle and recognize your interface right away? Hey, my enquiring mind wants to know.

Thanks!

RealBand
Joined: Aug 2011
Posts: 581
Journeyman
Offline
Journeyman
Joined: Aug 2011
Posts: 581
I've used several brands and have settled on the Tascam US-144MKII - Good features, plays really nice with BIAB / RB

http://www.ebay.com/sch/i.html?_trksid=p3984.m570.l1313&_nkw=tascam+us-144+mkII&_sacat=0

RealBand
Joined: Mar 2010
Posts: 264
R
rokq22 Offline OP
Apprentice
OP Offline
Apprentice
R
Joined: Mar 2010
Posts: 264
Quote:

I've used several brands and have settled on the Tascam US-144MKII - Good features, plays really nice with BIAB / RB

http://www.ebay.com/sch/i.html?_trksid=p3984.m570.l1313&_nkw=tascam+us-144+mkII&_sacat=0



Did you run into anything that bordered on "big hassle" for it/them to work with RealBand (if you use RB that is) or was it more a case of simply "Plug in and Play"? (But, in this case, plug in and record).

I'm making a BIG production of this move of mine into computer recording.

RealBand
Joined: Dec 2006
Posts: 393
Journeyman
Offline
Journeyman
Joined: Dec 2006
Posts: 393
I've used a Line 6 UX2 without problems. I think it's the same as the UX1, just with another set of mic and instrument inputs. I don't think anything on Windoze is every really plug and play - you've always got to install drivers and other software, which usually (in my experience) involves some troubleshooting...

Bruce


Macbook Pro 2018
2.6 GHz 6-core Intel Core i7, 16 GB RAM
OS Monterey
BIAB for Mac 2022
RealBand
Joined: Mar 2010
Posts: 264
R
rokq22 Offline OP
Apprentice
OP Offline
Apprentice
R
Joined: Mar 2010
Posts: 264
Quote:

I've used a Line 6 UX2 without problems. I think it's the same as the UX1, just with another set of mic and instrument inputs. I don't think anything on Windoze is every really plug and play - you've always got to install drivers and other software, which usually (in my experience) involves some troubleshooting...

Bruce



Cool. I believe that the UX1 and 2 are the same except, of course, the 2 has more inputs/outputs. But tell me, say everything is hooked up and I got RealBand running and then turn the UX1 on (I'm actually a bit scared to do it as I've had enough computer headaches in the past to last a lifetime. lol), will RealBand automatically "know" that my guitar and mic is ready for recording or am I going to have to do some tweaking to get the interface to work with RealBand? Understand, this is a big jump for me (I always make a big deal of things) from the usual way of just videotaping my stuff and uploading the finished video (after the edit) to YouTube. I know it's gonna be worth it no matter the hassle but just want to be prepared. (I can already see me hitting the bar later no matter how this turns out). First about 3-4 more videos to watch and then to the actually test of the interface with RealBand.

P.S. Just viewed the RealBand videos 1-2 so that makes a total of 5 videos I've viewed. Enough for now. Time to get my feet wet.

RealBand
Joined: May 2000
Posts: 22,165
Veteran
Offline
Veteran
Joined: May 2000
Posts: 22,165
Quote:

But tell me, say everything is hooked up and I got RealBand running and then turn the UX1 on



I'd suggest turning the UX1 on *before* firing up Realband.

RB looks to the operating system for installed interfaces (devices). If you turn it on after firing up RB the operating system will not have it listed as active and RB might miss it.


I do not work here, but the benefits are still awesome
Make your sound your own!
RealBand
Joined: Dec 2006
Posts: 393
Journeyman
Offline
Journeyman
Joined: Dec 2006
Posts: 393
What Rharv said - plug in before you turn on the computer. There are also some Line 6 videos on their web site as well as You Tube, showing how to use their interfaces. I don't believe any of these deal specifically with BIAB or Real Band, but they're generic enough to point you in the right direction. The UX1 should plug in via USB just like my UX2 does. I have mine set up to basically become the sound card (this allows use of the very low latency monitoring if desired).

Good luck

Bruce

PS - sorry for my previous typo - ... is EVER plug and play (not EVERY)


Macbook Pro 2018
2.6 GHz 6-core Intel Core i7, 16 GB RAM
OS Monterey
BIAB for Mac 2022
RealBand
Joined: Mar 2010
Posts: 264
R
rokq22 Offline OP
Apprentice
OP Offline
Apprentice
R
Joined: Mar 2010
Posts: 264
Thanks, yeah good idea to turn on the interface first. I'll also check out a couple of the Line 6 videos before I start.

https://www.youtube.com/results?search_qu...l87l695l10l10l0

Actually, I'm starting to get excited and wanting to get a move on with this stuff but watching a few more videos can't hurt.

RealBand
Joined: May 2000
Posts: 22,165
Veteran
Offline
Veteran
Joined: May 2000
Posts: 22,165
Then go ahead and get a move on and start having fun. I never watch the videos until I'm stumped. I'd rather be tinkering with the toys.
Sometimes a well asked question here on the forums can replace hours of video too.


I do not work here, but the benefits are still awesome
Make your sound your own!
RealBand
Joined: Mar 2010
Posts: 264
R
rokq22 Offline OP
Apprentice
OP Offline
Apprentice
R
Joined: Mar 2010
Posts: 264
Quote:

Then go ahead and get a move on and start having fun. I never watch the videos until I'm stumped. I'd rather be tinkering with the toys.
Sometimes a well asked question here on the forums can replace hours of video too.



Yeah, I think I actually did quite well with BIAB just by clicking on stuff and also reading a bit of the manual and asking a few questions on the forum when stumped but, for the most part, it was pretty straight forward and simple to use. This, however, is more technical so I get stressed out more. Like if the interface doesn't really work properly when I think it's supposed to. But, as the saying goes, "If you want to learn to swim you got to get into the water." And I will quite soon. (Besides, I think I'm getting bored watching the videos.)

Oh, another question. Do you leave the interface plugged into the computer 24/7? I already know that by taking it out of the USB and plugging it back in the software installation runs again. Er, I guess that might mean "Yes, leave it plugged in."

RealBand
Joined: Dec 2006
Posts: 393
Journeyman
Offline
Journeyman
Joined: Dec 2006
Posts: 393
I just leave mine plugged in.

Bruce


Macbook Pro 2018
2.6 GHz 6-core Intel Core i7, 16 GB RAM
OS Monterey
BIAB for Mac 2022
RealBand
Joined: Nov 2010
Posts: 349
C
Journeyman
Offline
Journeyman
C
Joined: Nov 2010
Posts: 349
I use a UX-1 with Realband and here's what I do:

Mine is always on and I can use the Output dial to control my computer speaker volume along with my computer's speaker volume knob.
With the computer,s speaker knob off the UX-1 Output can control your Headphone volume for playing without "entertaining" others.

To use with Realband:
Open "Gearbox" program that came with your UX-1 (or install it if you didn't yet)

Once in Gearbox go to "Source Select" and using the drop down menu, select your input, either Mic or Instument.
You can only do one or the other with the UX-1.

Gearbox also has tons of modeling effects if you want to use them though most add the effects to a dry signal after recording into Realband.

If you are using a powered condenser mic remember to plug the powered mic signal cable into the UX-1 mic slot.
Dynamic mics of course can plug into that slot and the UX-1 acts as your pre amp.
Remember to turn your Mic Gain knob up.

I always use the red Record Audio button in Realband (has the white sound wave on it) since it will automatically change you track to audio if by chance it was set to midi.

Hope this helps,
Carkins

RealBand
A
Anonymous
Unregistered
Anonymous
Unregistered
A
Quote:

Do you leave the interface plugged into the computer 24/7?




When you get done watching a DVD, do you pull the leads out of the TV? When you finish listening to CD, do you disconnect the speaker wires from the amp?

Yes, leave everything plugged in forever until you sell the computer or buy a new one.

Similar to the smile I get when I have to call the cable company and the level one agent script includes "Is the TV plugged in?" Do you think I unplug the TV every night before bed? You plug it in when you buy it and it stays plugged in until you move.....

Previous Thread
Next Thread
Go To

Link Copied to Clipboard
ChatPG

Ask sales and support questions about Band-in-a-Box using natural language.

ChatPG's knowledge base includes the full Band-in-a-Box User Manual and sales information from the website.

PG Music News
Video: Band-in-a-Box® 2025 for Mac®: VST3 Plugin Support

Band-in-a-Box® 2025 for Mac® now includes support for VST3 plugins, alongside VST and AU. Use them with MIDI or audio tracks for even more creative possibilities in your music production.

Band-in-a-Box® 2025 for Macs®: VST3 Plugin Support

Video: Band-in-a-Box® 2025 for Mac®: Using VST3 Plugins

Join the conversation on our forum.

Band-in-a-Box 2025 for Mac Videos

With the release of Band-in-a-Box® 2025 for Mac, we’re rolling out a collection of brand-new videos on our YouTube channel. We’ll also keep this forum post updated so you can easily find all the latest videos in one convenient spot.

From overviews of new features and walkthroughs of the 202 new RealTracks, to highlights of XPro Styles PAK 8, Xtra Styles PAKs 18, the 2025 49-PAK, and in-depth tutorials — you’ll find everything you need to explore what’s new in Band-in-a-Box® 2025.

Reference this forum post for One-Stop Shopping of our Band-in-a-Box® 2025 Mac Videos — we’ll be adding more videos as they’re released!

Band-in-a-Box 2025 for Mac is Here!

Band-in-a-Box® 2025 for Mac is here, packed with major new features and an incredible collection of available new content! This includes 202 RealTracks (in Sets 449-467), plus 20 bonus Unreleased RealTracks in the 2025 49-PAK. There are new RealStyles, MIDI SuperTracks, Instrumental Studies, “Songs with Vocals” Artist Performance Sets, Playable RealTracks Set 4, two new sets of “RealDrums Stems,” XPro Styles PAK 8, Xtra Styles PAK 19, and more!

Special Offers
Upgrade to Band-in-a-Box® 2025 for Mac with savings of up to 50% on most upgrade packages during our special—available until July 31, 2025! Visit our Band-in-a-Box® packages page for all the purchase options available.

2025 Free Bonus PAK & 49-PAK Add-ons
We've packed our Free Bonus PAK & 49-PAK with some incredible Add-ons! The Free Bonus PAK is automatically included with most Band-in-a-Box® for Mac 2025 packages, but for even more Add-ons (including 20 Unreleased RealTracks!) upgrade to the 2025 49-PAK for only $49. You can see the full lists of items in each package, and listen to demos here.

If you have any questions, feel free to connect with us directly—we’re here to help!

Band-in-a-Box 2025 Italian Version is Here!

Cari amici
È stata aggerate la versione in Italiano del programma più amato dagli appassionati di musica, il nostro Band-in-a-Box.
Questo è il link alla nuova versione 2025.

Di seguito i link per scaricare il pacchetti di lingua italiana aggiornati per Band-in-a-Box e RealBand, anche per chi avesse già comprato la nuova versione in inglese.

Band-in-a-Box 2025 - Italiano
RealBand 2025 - Italiano

Band-in-a-Box 2025 French Version is Here!

Bonjour à tous,

Band-in-a-Box® 2025 pour Windows est disponible en Français.
Le téléchargement se fait à partir du site PG Music

Pour ceux qui auraient déjà acheté la version 2025 de Band-in-a-Box (et qui donc ont une version anglaise), il est possible de "franciser" cette version avec les patchs suivants:

BIAB 2025 - francisation
RealBand 2025 - francisation

Voilà, enjoy!

Band-in-a-Box 2025 German Version is Here!

Band-in-a-Box 2025 für Windows Deutsch ist verfügbar!

Die deutsche Version Band-in-a-Box® 2025 für Windows ist ab sofort verfügbar!

Alle die bereits die englische Version von Band-in-a-Box und RealBand 2024 installiert haben, finden hier die Installationsdateien für das Sprachenupdate:

https://nn.pgmusic.com/pgfiles/languagesupport/deutsch2025.exe
https://nn.pgmusic.com/pgfiles/languagesupport/deutsch2025RB.exe

Update Your Band-in-a-Box® 2025 to Build 1128 for Windows Today!

Already using Band-in-a-Box 2025 for Windows®? Download Build 1128 now from our Support Page to enjoy the latest enhancements and improvements from our team.

Stay up to date—get the latest update now!

Forum Statistics
Forums58
Topics84,303
Posts777,513
Members39,612
Most Online25,754
Jan 24th, 2025
Newest Members
Claudio Paolini, bjornen71, CATBELLOU, Banjopotamus, BudLab
39,612 Registered Users
Top Posters(30 Days)
MarioD 148
zedd 119
DC Ron 106
nonchai 104
WaoBand 102
rsdean 88
Today's Birthdays
Manos
Powered by UBB.threads™ PHP Forum Software 7.7.5