|
Log in to post
|
Print Thread |
|
|
|
|
|
Band-in-a-Box for Windows
|
Joined: Jan 2007
Posts: 88
Enthusiast
|
OP
Enthusiast
Joined: Jan 2007
Posts: 88 |
I'm using BB2012; and I have all of the styles and upgrades from 2012 back to BB12 (2005). I'm trying to use the =BRT_PBG style which was part of Set #16, and tweak it a bit. Somewhere along the line the guitar-track got reset from "Strumming Guitar-#406" (which was the original setting) to: "Strumming Guitar-#524".
I reinstalled Set #16 from the original installation disks to overwrite the styles. I made sure the song I'm working on is "Unfrozen" and "Un-Rendered", and made sure that the song file was not "protected" in any way. Every time I try to right-click on the Guitar track and "Re-Assign" the track from 524 to 406, when I close the selection window, it still shows 524. I've tried changing through the GUITAR radio-button on the bar at the top, and I've tried changing it through the "Mixer" window by choosing the "Patches" tab, and choosing "Select RealTracks"... Neither method changes the track.
(And I also wanted to change the STRINGS MIDI patch from #50 to #52) That WORKED... So, the MIDI patches seem to be changeable, but this guitar track won't.
Any ideas?
Last edited by LadyJazzer; 05/03/12 12:48 PM.
|
|
|
|
|
|
|
|
|
|
|
|
|
Band-in-a-Box for Windows
|
Joined: Oct 2008
Posts: 18,949
Veteran
|
|
Veteran
Joined: Oct 2008
Posts: 18,949 |
Hi LadyJazzer,
I've just had a look at the style in my BIAB ver. 2012, and it has RT #406 as you say was its original default. Have you tried returning to factory settings and then doing the instrument change? It sounds like something has become "stuck" inside the software.
Regards,
Noel
MY SONGS...Audiophile BIAB 2024
|
|
|
|
|
|
|
|
|
|
|
|
|
Band-in-a-Box for Windows
|
Joined: Jan 2007
Posts: 88
Enthusiast
|
|
OP
Enthusiast
Joined: Jan 2007
Posts: 88 |
Dumb question: If I click on "Return to Factory Settings" does that mess with the MIDI/VST/DXI setting stuff? I'd rather have a root canal than mess with that again after all these years...
Thanks!
"You play pretty good--for a girl."
|
|
|
|
|
|
|
|
|
|
|
|
|
Band-in-a-Box for Windows
|
Joined: Dec 2005
Posts: 493
Journeyman
|
|
Journeyman
Joined: Dec 2005
Posts: 493 |
Save you current settings before returning to factory settings.
|
|
|
|
|
|
|
|
|
|
|
|
|
Band-in-a-Box for Windows
|
Joined: Jul 2000
Posts: 25,931
Veteran
|
|
Veteran
Joined: Jul 2000
Posts: 25,931 |
In the newer versions, 'Return to factory settings' first prompts you to save your existing settings.
Also, you would want choice #1, "Return MOST to factory settings (excluding MIDI drivers and patch maps)".
BIAB 2024 Win Audiophile. Software: Studio One 6.5 Pro, Swam horns, Acoustica-7, Notion 6; Win 11 Home. Hardware: Intel i9, 32 Gb; Roland Integra-7, Presonus Studio 192, Presonus Faderport 8, Royer 121, Adam Sub8 & Neumann 120 monitors
|
|
|
|
|
|
|
|
|
|
|
|
|
Band-in-a-Box for Windows
|
Joined: Jan 2007
Posts: 88
Enthusiast
|
|
OP
Enthusiast
Joined: Jan 2007
Posts: 88 |
OK... I did the "Return to factory settings"...And I chose Option-1 "(excluding MIDI...)"
I reopened my track, and tried to change the Guitar setting back to #406...It still won't change from #524...
So, that didn't work...
I just sent my track to a friend who also has BB2012, and she's going to try to change it, and send it back to me to see if that has any effect. However, I'm betting it won't...
I'll post the result when I get it back...
"You play pretty good--for a girl."
|
|
|
|
|
|
|
|
|
|
|
|
|
Band-in-a-Box for Windows
|
Joined: May 2007
Posts: 1,616
Expert
|
|
Expert
Joined: May 2007
Posts: 1,616 |
It may be doing an automatic tempo swap. Try changing your tempo and see if it reverts to the RT you want. You can turn off tempo swaps in the Song Settings. You usually want to let BIAB do the tempo swaps.
R
|
|
|
|
|
|
|
|
|
|
|
|
|
Band-in-a-Box for Windows
|
Joined: Jan 2007
Posts: 88
Enthusiast
|
|
OP
Enthusiast
Joined: Jan 2007
Posts: 88 |
Just heard back from my friend:
"I tried everything I know, and it always reverts to 524. This is interesting though. I clicked on the soloist track and put 406 in there and even IT would revert to 524 when it began to play. BUT I picked a tenor sax to see what it would do on something other than a guitar, and it held it just fine. I don't get it."
So, the problem seems to follow the song file.
Putting the 406 file into a "Soloist" track even gets changed to 524.
Picking something other than 406 (tenor sax, in her test) into Soloist track works...
If I click on "NEW", and select the =BRT_PBG style in the Style Picker, here is the description:
=BRT_PBG.STY. Light Rock w/ BossaPiano(140 RT)
Real and MIDI. Quintet.
RD: BOSSAROCK^6-a:Blastix, HiHat , b:Sidestick, HiHat Loud :Craig Scott
RT464: Bass, Acoustic, Bossa Ev 140, Neil Swainson
RT470: Piano, Acoustic, Rhythm Bossa Ev 140, Miles Black
RT406: Guitar, Acoustic, Strumming Ev 136, Jason Roller (**)
M50: Slow Strings
So, just to eliminate any other things. I closed BiaB.. Re-Opened it.
1) Create empty test-folder.
2) Select "New", and choose the =BRT_PBG style.
3) Give it a Title; Assign the start/end values (9-159); # of choruses = 1
....Check guitar-track setting = #406...OK!
4) Set key to Bb; set tempo to 174 (All of these settings are the values for the problem song)...
....Check guitar-track setting = #524... Ooops...
For awhile I tried creating it from scratch and then copy/pasting the chords in from the older version; then pulling up the "Bar Settings (F5) screen and clicking on the "Clear All Settings" button, thinking that would let me cheat... But even though it started out with 406/guitar-track, it would revert to 524...
With this last test, I didn't even copy/paste anything. I start with an empty track, for a couple of steps it's okay at #406... But at some point during the setup, it reverts to 524 before I can even start entering chords...
OK, I'm running out of ideas...
"You play pretty good--for a girl."
|
|
|
|
|
|
|
|
|
|
|
|
|
Band-in-a-Box for Windows
|
Joined: May 2007
Posts: 1,616
Expert
|
|
Expert
Joined: May 2007
Posts: 1,616 |
|
|
|
|
|
|
|
|
|
|
|
|
|
Band-in-a-Box for Windows
|
Joined: Jan 2007
Posts: 88
Enthusiast
|
|
OP
Enthusiast
Joined: Jan 2007
Posts: 88 |
UPDATE:
Rachel:
I tried turning off the "Allow RealTracks substitution based on tempo"... in the Song Settings page, and that seems to have done it! I guess as soon as I changed the default tempo of the style to: 174, that was triggering the change!!
Well, dang! After using this thing for 7 years, I learned yet something ELSE new!!!
Thank you SO much for hanging with me as I worked through this!
LJ
"You play pretty good--for a girl."
|
|
|
|
|
|
|
|
|
|
|
|
|
Band-in-a-Box for Windows
|
Joined: May 2007
Posts: 1,616
Expert
|
|
Expert
Joined: May 2007
Posts: 1,616 |
There is also a global setting for swapping in RT Settings. It is usually best to let BIAB do the swapping for you unless you have a good reason to override it.
|
|
|
|
|
|
|
|
|
|
|
|
|
Band-in-a-Box for Windows
|
Joined: Oct 2008
Posts: 18,949
Veteran
|
|
Veteran
Joined: Oct 2008
Posts: 18,949 |
Rachael,
That was very clever of you to pick that one up. It by-passed me.
Noel
MY SONGS...Audiophile BIAB 2024
|
|
|
|
|
|
|
|
|
|
|
|
Ask sales and support questions about Band-in-a-Box using natural language.
ChatPG's knowledge base includes the full Band-in-a-Box User Manual and sales information from the website.
|
|
|
|
|
|
|
|
|
|
|
Video: Making a Song with Band-in-a-Box®, ChatGPT, and Synth V
Take your Band-in-a-Box® project to a whole new level when you incorporate ChatGPT and Synth V to add lyrics and vocals to your song!
We wanted to demonstrate how this is done with our video, where we show you how to go from nothing to a finished "radio ready" modern pop song by combining the features of Band-in-a-Box®, ChatGPT, and Synth V!
Listen to the finished song, so you get a listen to the finished product: https://demos.pgmusic.com/misc/behindthefame.m4a
If you like it, watch the video. Either way, let's hear your comments!
Henry Clarke: Revolutionize Your Band-in-Box® Tracks with Regenerating Function
User Video: Next-Level AI Music Editing with ACE Studio and Band-in-a-Box®
Band-in-a-Box® 2024 German for Windows is Here!
Band-in-a-Box® 2024 für Windows Deutsch ist verfügbar!
Wir waren fleißig und haben über 50 neue Funktionen und eine erstaunliche Sammlung neuer Inhalte hinzugefügt, darunter 222 RealTracks, neue RealStyles, MIDI SuperTracks, Instrumental Studies, "Songs with Vocals" Artist Performance Sets, abspielbare RealTracks Set 3, abspielbare RealDrums Set 2, zwei neue Sets von "RealDrums Stems", XPro Styles PAK 6, Xtra Styles PAK 17 und mehr!
Paket | Was ist Neu
Update Your PowerTracks Pro Audio 2024 Today!
The Newest RealBand 2024 Update is Here!
The newest RealBand 2024 Build 5 update is now available!
Download and install this to your RealBand 2024 for updated print options, streamlined loading and saving of .SGU & MGU (BB) files, and to add a number of program adjustments that address user-reported bugs and concerns.
This free update is available to all RealBand 2024 users. To learn more about this update and download it, head to www.pgmusic.com/support.realband.htm#20245
The Band-in-a-Box® Flash Drive Backup Option
Today (April 5) is National Flash Drive Day!
Did you know... not only can you download your Band-in-a-Box® Pro, MegaPAK, or PlusPAK purchase - you can also choose to add a flash drive backup copy with the installation files for only $15? It even comes with a Band-in-a-Box® keychain!
For the larger Band-in-a-Box® packages (UltraPAK, UltraPAK+, Audiophile Edition), the hard drive backup copy is available for only $25. This will include a preinstalled and ready to use program, along with your installation files.
Backup copies are offered during the checkout process on our website.
Already purchased your e-delivery version, and now you wish you had a backup copy? It's not too late! If your purchase was for the current version of Band-in-a-Box®, you can still reach out to our team directly to place your backup copy order!
Note: the Band-in-a-Box® keychain is only included with flash drive backup copies, and cannot be purchased separately.
Handy flash drive tip: Always try plugging in a USB device the wrong way first? If your flash drive (or other USB plug) doesn't have a symbol to indicate which way is up, look for the side with a seam on the metal connector (it only has a line across one side) - that's the side that either faces down or to the left, depending on your port placement.
|
|
|
|
|
|
|
|
|
|
|
|
Forums66
Topics81,852
Posts738,023
Members38,599
| |
Most Online2,537
Jan 19th, 2020
|
|
|
|
|
|
|
|
|
Dansk
Deutsch - Windows
Español
Français - Windows
Italiano - Windows
Nederlands
Polski
Português
Svenskt
русский
Japanese
Simplified Chinese
Traditional Chinese
Korean