Okay, I'm on break. Let me try again.

When you turn on a power switch it is considered "energized." Doing this from our notional amplifier's switch starts a timer connected to a relay which suppresses audio output until the power-on transient has passed. This is a one-shot device. The delay won't happen again until you cycle the unit's onboard power switch again, i.e., turn it off and back on.

Therefore, if the switch is left on while the device is powered down, when you reintroduce power you will get an inrush transient as the device powers up, but with no delay as the relay has already been triggered. Therefore the transient will be passed to the speakers if they are on. Megathump to the max. Bad. Krunk says not do.

Is mo' bettah?


"My primary musical instrument is the personal computer."