Lets hope I get the answer/s I need.

I currently have a convoluted setup ( 2 mixers + M-Audio USB) that works but clutters up my little studio.
I am running an Acer notebook/ Windows 7 at present.

I have started doing some research and checking for a new mixer with more/better functionality and the M-Audio Fasttrack C600 was suggested by the equipment supplier I frequent.

The only thing is he has NEVER heard of BIAB or RB and keeps on showing me the Cubases' etc to "prove" that it will do what I believe I need.

So here goes:

I see that the C600 has 6 inputs.
I have a Digitech Voicelive4 and my Guitar and my NT2A Mic goes into that
I then take the guitar thru and the mic out into say Input1 and Input2
I have a friend who sometimes jam with me so I need another Mic and Guitar , I assume Input3 and input4

I also need to bring BIAB/RB into the Mix in order to monitor/hear the mix. (will this now make the M-Audio USB soundcard redundant) or do I have to bring the M-AUDIO USB output back into the C600?


When I record in RB onto a track , can I choose which C600 input gets channelled to the selected track? I only want to record 1 of the devices ...but
I still want to monitor to all the rest as a mix ....


I have downloaded the manual and from the content think that you could assign an input channel to an output using the input monitor driver software. the question then is if I dump my M-Audio USB and the output goes into the PC through the USB then how will RB "select only Input(n)"



I hope this makes sense ...

Last edited by CountryTrash; 01/15/13 05:47 AM.
I'm doing allright for Country Trash ....

I used to care, but things have changed (Bob Dylan)

BIAB 2022W + RB
M-Audio FastTrack C600, Rode NT2-A
Digitech VoiceLive 4

Epiphone Sheraton, Ibanez 12str, Washburn 6str, Cort 6Str Nylon
Yanagisawa Tenor Sax