Quote:

One additional teensy tip: If you loaded that midi file via File=>Open Midi File.., the current style will be disabled. If it's disabled after you transfer the bass channel, for example, to the bass track, the track won't sound. So at the end of the above procedure, make sure the style is enabled. (Support is considering making this automatic.)



Yes, I forgot to mention that point. It will be nice if support can make that automatic.

Quote:

Also, note that while it might be helpful to edit the data on the Soloist track, it's not technically necessary to do so. Data can be moved/copied directly from Melody to the target track.



True. It's not necessary but I found lots of problems if you don't. The first and biggest is the patch changes. If left in the target track will always change to the patch in the midi file rather than what you expect/set.

Second, setting like pan, chorus and volume make unexpected changes and can be confusing. I leave volume alone if it's necessary to the qualityof the track and modifiy it with the piano roll. Otherwise I remove volume commands.

BiaB 2013 b366, RB 2013 b4, WinXP Pro SP3, Toshiba M70, 1.8GHz 2GB RAM 100GB HD. Focusrite Saffire 6 USB, Ketron SD2.BiaB Wiki