Quote:

You're right about the midi ports Paul.

I tried to save the song I referenced above, then opened another song without any ReDirect in it. Then went back to the referenced song and opened it. None of the redirect parts (piano and trumpet from the ReDirect) AND none of the VSTi assignments were making a sound.

When I hit the "SYNTH" VSTi button in BIAB all of the assignments for the ReDirector, as well as the VSTi's, are all there but there is no sound on those tracks. If I click on each one, momentarily change it to another port and then go back to the original port; all is well and they all sound as they did originally.

Was not expecting this as I pretty much have my system hardwired in that I never make any changes to USB's, cables, audio or midi interfaces or synth setups.

Do you think that this is the problem you mentioned with port volitility or do I have some other issue going on?



I think I know what might be causing this. You can't set the number of ports until the VSTi has loaded but unfortunately by that time it has trued to set the port(s). So the port number can be higher than the apparent number of ports. I think I have a workaround for this. I set the max number of ports to ten during creation of the VSTi then set to max ports later. That way it should work. hopefully.

Anyway, download this version and give it a try. If it works I'll update the zip file.

MidiRedirect.dll

BiaB 2013 b366, RB 2013 b4, WinXP Pro SP3, Toshiba M70, 1.8GHz 2GB RAM 100GB HD. Focusrite Saffire 6 USB, Ketron SD2.BiaB Wiki