I assume that you have set this Module up correctly and the appropriate driver is selectable from the Midi Out Drivers list for RB.

Select the Classic Window and you will see a number of columns. Ensure that the Ketron driver is number one in the Driver Listing and that the Column PT (port) is listed as one. Now if you look at the Technical Tables in the Manual you will find that patches are listed in three Voice Banks and a Preset Bank.

The numbers on the left of each Patch Name identifies the Patch. Next to the Bank Name at the top of the Technical Table is an instruction in brackets (Control Change 00, Value 0,1,10 or 2 for Banks A, B, C and Presets.

In the Classic Menu enter the required Patch number in the Column "Prg" (Program), enter the Values 0, 1, 10, 2 in the column "Bank". The patch can be played via a loaded Midi File or via the RB Keyboard or an external keyboard. These instructions can also be entered via the Main Tracks Window.


To get the Names of the Patches to appear in the Prg Column you will need a Patches List for the Ketron SD 2 which, I believe can be obtained from PG Music.