|
Log in to post
|
Print Thread |
|
|
|
|
|
PowerTracks Pro Audio
|
Joined: Aug 2000
Posts: 59
Enthusiast
|
OP
Enthusiast
Joined: Aug 2000
Posts: 59 |
I've had PowerTracks ProAudio 9 for a long time but never really played with it. I recently picked up an M-Audio KeyStudio 25 off Craigslist and hooked its usb to the PC running XP Pro. With PowerTracks 9 open I can play the keyboard and change the Program sounds assigned to any of the 8 buttons on the M-Audio keyboard... and I hear the sounds on the PC. PowerTracks MIDI Driver Setup is: Input Drivers(s) - USB 02 in(1) = SELECTED -- I think the "O2" is the M-Audio KeyStudio 25 driver Output Driver(s) Options include: - SoundMax Wavetable Synth = SELECTED - Microsoft MIDI Mapper -- gives 'out of range for your system' message if selected - Microsoft GS Wavetable SW Synth - USB O2 Out(1) The Questions: 1 - When I click record on PowerTracks 9 it records the keyboard but when I play it back I hear a different sound than was played... how to fix this? 2 - When I look at the recorded tracks information I can not see where it tells me what General MIDI Program sound (1 to 127) was recorded on the track. Am I just not seeing it or what? How to see what General MIDI Program was recorded on the track? 3 - Didn't PowerTracks 9 come with a software emulation of the Roland Sound Canvas sound module? (and others?) If so shouldn't it (or they) appear in the MIDI Driver Setup under Options? Even though I understand the MIDI concept of the MIDI Controller device sending bytes of data to a hardware or software Sound Module I'm really a newbie and am working my way through the terminology all the manuals and tutorials use  4 - For instance - is a software or hardware implementation of a Sound Module considered a synthesizer aka synth? In fact I have a Roland SoundCanvas Model SC 55 Sound Generator unit and a Korg NX5R which I acquired a couple of years back when I wanted to create some BIAB tracks... but am just now finding time. 5 - I call these devices Sound Modules is that the correct term? or should I call them synth modules or what?) 6 - Finally, are the software versions of these ound/synth modules as good as using the real hardware device? I'll be posting a number of newbie questions as I go along so thanks to anyone for help with educating me :-) thanks for any help. PS - I'm going to upgrade to PowerTracks v12 after I'm a little more comfortable with MIDI, the software, the keyboard, terminology, etc.
|
|
|
|
|
|
|
|
|
|
|
|
|
PowerTracks Pro Audio
|
Joined: Dec 2011
Posts: 3,361
Veteran
|
|
Veteran
Joined: Dec 2011
Posts: 3,361 |
Hi Will.
OK, lets go through it in order.
Output Drivers - Either the Soundmax or the Microsoft GS should work.
1) Open the CLASSIC TRACKS window. (Maybe just TRACKS on PT9) The boxes you need are CH for the midi channel and PRG for the patch, Double clicking on the PRG box will bring up a dialogue where you can choose the patch. Once these are entered, it should play these sounds back.
2) These are the settings as described in (1).
3) No, not that I can remember. (It's been a while since that version!)
4) It's usually called a software instrument, also known as a VSTi or DXi.
5) As (4).
6) Yes.
There are a lot of useful improvements to Power Tracks since version 9. We're now on PT 2013. It's well worth the up-grade.
If you need more info, we're always happy to help.
ROG.
|
|
|
|
|
|
|
|
|
|
|
|
|
PowerTracks Pro Audio
|
Joined: May 2000
Posts: 22,551
Veteran
|
|
Veteran
Joined: May 2000
Posts: 22,551 |
I think PT9 may have included VSC .. however, it was a separate install from the disk, and it does not work on 64 bit systems (which wasn't a factor back then).
The VSC was a separate install or a checkbox that needed to be enabled during install for a few versions (going from memory here .. I probably do have that disk around here somewhere).
I do not work here, but the benefits are still awesome
Make your sound your own!
|
|
|
|
|
|
|
|
|
|
|
|
|
PowerTracks Pro Audio
|
Joined: Aug 2000
Posts: 59
Enthusiast
|
|
OP
Enthusiast
Joined: Aug 2000
Posts: 59 |
ROG, Thank you for your kind assistance.
Regarding question number 1...
Am I understanding you correctly that if I setup the M-audio KeyStudio 25 keyboard to send General MIDI sound 26 (guitar jazz electric) messages when played...
After I play and record the track in PowerTracks v9 (or any PowerTracks ?) that I must then open PowerTracks "Tracks" window and click on the tracks 'knob' then click on program and then click on 27 (electric jazz guitar) to have PowerTracks remember and playback the instrument just played on the keyboard controller?
I thought the General Midi Instrument choice (Program) identity was included in the General MIDI messages sent by the midi keyboard controller... in fact it must be so since I can hear the proper program/instrument when playing and recording...
So I guess my question is why does not PowerTracks understand that I'm sending Program 27 messages and just remember it... and display that info when I click on the Tracks window and the just recorded track?
Sorry for the questions but I'm trying to get this in my head :-)
Thanks again for your help !
|
|
|
|
|
|
|
|
|
|
|
|
|
PowerTracks Pro Audio
|
Joined: Dec 2011
Posts: 3,361
Veteran
|
|
Veteran
Joined: Dec 2011
Posts: 3,361 |
Hi Will.
If you send the patch change from the keyboard before you start recording, the program will see the change, but it has nowhere to store it. If you transmit the patch after you hit record, then the patch change information will be recorded as part of the track.
This does mean, however, that you would need to go to the MIDI EVENT window to see the stored patch information, which is a bit tedious. Entering the details into the TRACKS window is probably your best option.
rharv - Just dug out my old PT9 disk and can't see the VSC anywhere. It is an up-grade disk from PT8, though I believe it was the full program but without the printed manual. I suppose it's always possible that it kicks in halfway through the install, which I haven't tried. It was a while ago wasn't it!
ROG.
|
|
|
|
|
|
|
|
|
|
|
|
|
PowerTracks Pro Audio
|
Joined: May 2000
Posts: 22,551
Veteran
|
|
Veteran
Joined: May 2000
Posts: 22,551 |
I'm not installing PT9 again to test either, Rog. <grin>
The VSC thing went through stages. I think the VSC was also offered as a separate product at one point in time.
At other times you needed to have BiaB installed for the VSC to work in PT.
I was guessing at possibilities, since he seemed to think he had it in his original post. If he did, it was likely on that disk somewhere.
I do not work here, but the benefits are still awesome
Make your sound your own!
|
|
|
|
|
|
|
|
|
|
|
|
|
PowerTracks Pro Audio
|
Joined: Aug 2000
Posts: 59
Enthusiast
|
|
OP
Enthusiast
Joined: Aug 2000
Posts: 59 |
Thanks guys. Just getting back to this thread.
I'm going to upgrade to the latest PT in a few days... do you know if that comes with a software implementation of VSC or whatever?
I also own BIAB but need to upgrade that too... so maybe that comes with the software VSc/VSTi/DXi...
I'm still a little confused about why PT can not see the data defining the General MIDI instrument the keyboard is setup for and simply record that data... and upon inspection (a click or whatever) display what it recorded. This after all is simply a series of data bytes/words/packets transmitted by the MIDI controller to PT... so I would think think the data/information is in there somewhere and the 'operator' shouldn't have to intervene or have to think about it.
But your reference to weather the device (the midi controller) sends the selected program info (the selected instrument) data out the MIDI pipe (cable) to the receiving device (PT in this case) before you start recording or after will require more research/education on my part.
Regardless,
Thanks for the help folks !
|
|
|
|
|
|
|
|
|
|
|
|
|
PowerTracks Pro Audio
|
Joined: May 2000
Posts: 22,551
Veteran
|
|
Veteran
Joined: May 2000
Posts: 22,551 |
I'm still a little confused about why PT can not see the data defining the General MIDI instrument the keyboard is setup for and simply record that data... and upon inspection (a click or whatever) display what it recorded. This after all is simply a series of data bytes/words/packets transmitted by the MIDI controller to PT... so I would think think the data/information is in there somewhere and the 'operator' shouldn't have to intervene or have to think about it.
That's why the answer to the question about whether the controller sends it in the first place is important ^^ (above); if it doesn't get sent while PT is recording you can't expect PT to record it. Looking n the Event List would tell you if it was recorded or not .. unless you have some punch-in setting affecting when PT starts recording in relationship to when the controller may actually send the data. Often it's just quicker to pick the sound you want for the track afterwards, as opposed to spending half an hour checking possible causes.
I do not work here, but the benefits are still awesome
Make your sound your own!
|
|
|
|
|
|
|
|
|
|
|
|
Ask sales and support questions about Band-in-a-Box using natural language.
ChatPG's knowledge base includes the full Band-in-a-Box User Manual and sales information from the website.
|
|
|
|
|
|
|
|
|
|
|
Update to Build 10 of RealBand® 2026 for Windows®!
If you're already using RealBand 2026 for Windows, download build 10 to get all the latest additions and enhancements.
Band-in-a-Box® 2025 for Mac® users: Build 904 now available!
If you're already using Band-in-a-Box® 2025 for Mac®, make sure to grab the latest update! Build 904 is now available for download and includes the newest additions and enhancements from our team.
Band-in-a-Box® 2026 for Windows® users: Build 1237 is now available!
Already a Band-in-a-Box 2026 for Windows user? Stay up to date and download the build 1237 to get all the latest additions and enhancements.
PowerTracks Pro 2026 for Windows is Here!
PowerTracks 2026 is here—bringing powerful new enhancements designed to make your production workflow faster, smoother, and more intuitive than ever.
The enhanced Mixer now shows Track Type and Instrument icons for instant track recognition, while a new grid option simplifies editing views. Non-floating windows adopt a modern title bar style, replacing the legacy blue bar.
The Master Volume is now applied at the end of the audio chain for consistent levels and full-signal master effects.
Tablature now includes a “Save bends when saving XML” option for improved compatibility with PG Music tools. Plus, you can instantly match all track heights with a simple Ctrl-release after resizing, and Add2 chords from MGU/SGU files are now fully supported... and more!
Get started today—first-time packages start at just $49.
Already using PowerTracks Pro Audio? Upgrade for as little as $29 and enjoy the latest improvements!
Order now!
Band-in-a-Box 2026 for Windows Special Offers End Tomorrow (January 15th, 2026) at 11:59 PM PST!
Time really is running out! Save up to 50% on Band-in-a-Box® 2026 for Windows® upgrades and receive a FREE Bonus PAK—only when you order by 11:59 PM PST on Thursday, January 15, 2026!
We've added many major new features and new content in a redesigned Band-in-a-Box® 2026 for Windows®!
Version 2026 introduces a modernized GUI redesign across the program, with updated toolbars, refreshed windows, smoother workflows, and a new Dark Mode option. There’s also a new side toolbar for quicker access to commonly used windows, and the new Multi-View feature lets you arrange multiple windows as layered panels without overlap, making it easier to customize your workspace.
Another exciting new addition is the new AI-Notes feature, which can transcribe polyphonic audio into MIDI. You can view the results in notation or play them back as MIDI, and choose whether to process an entire track or focus on specific parts like drums, bass, guitars/piano, or vocals. There's over 100 new features in Band-in-a-Box® 2026 for Windows®.
There's an amazing collection of new content too, including 202 RealTracks, new RealStyles, MIDI SuperTracks, Instrumental Studies, “Songs with Vocals” Artist Performance Sets, Playable RealTracks Set 5, two RealDrums Stems sets, XPro Styles PAK 10, Xtra Styles PAK 21, and much more!
Upgrade your Band-in-a-Box for Windows to save up to 50% on most Band-in-a-Box® 2026 upgrade packages!
Plus, when you order your Band-in-a-Box® 2026 upgrade during our special, you'll receive a Free Bonus PAK of exciting new add-ons.
If you need any help deciding which package is the best option for you, just let us know. We are here to help!
Band-in-a-Box® 2026 for Windows® Special Offers Extended Until January 15, 2026!
Good news! You still have time to upgrade to the latest version of Band-in-a-Box® for Windows® and save. Our Band-in-a-Box® 2026 for Windows® special now runs through January 15, 2025!
We've packed Band-in-a-Box® 2026 with major new features, enhancements, and an incredible lineup of new content! The program now sports a sleek, modern GUI redesign across the entire interface, including updated toolbars, refreshed windows, smoother workflows, a new dark mode option, and more. The brand-new side toolbar provides quicker access to key windows, while the new Multi-View feature lets you arrange multiple windows as layered panels without overlap, creating a flexible, clutter-free workspace. We have an amazing new “AI-Notes” feature. This transcribes polyphonic audio into MIDI so you can view it in notation or play it back as MIDI. You can process an entire track (all pitched instruments and drums) or focus on individual parts like drums, bass, guitars/piano, or vocals. There's an amazing collection of new content too, including 202 RealTracks, new RealStyles, MIDI SuperTracks, Instrumental Studies, “Songs with Vocals” Artist Performance Sets, Playable RealTracks Set 5, two RealDrums Stems sets, XPro Styles PAK 10, Xtra Styles PAK 21, and much more!
There are over 100 new features in Band-in-a-Box® 2026 for Windows®.
When you order purchase Band-in-a-Box® 2026 before 11:59 PM PST on January 15th, you'll also receive a Free Bonus PAK packed with exciting new add-ons.
Upgrade to Band-in-a-Box® 2026 for Windows® today! Check out the Band-in-a-Box® packages page for all the purchase options available.
Happy New Year!
Thank you for being part of the Band-in-a-Box® community.
Wishing you and yours a very happy 2026—Happy New Year from all of us at PG Music!
|
|
|
|
|
|
|
|
|
|
|
|
Forums57
Topics86,083
Posts799,875
Members40,031
| |
Most Online44,367
Mar 4th, 2026
|
|
|
|
|
|
|
|
|
|
|
|
There are no members with birthdays on this day. |
|
|
|
|
|
|
|
|
Dansk
Deutsch - Windows
Español
Français - Windows
Italiano - Windows
Nederlands
Polski
Português
Svenskt
русский
Japanese
Simplified Chinese
Traditional Chinese
Korean