From Realband Help Files -
---------------------------------

Enable Input Monitoring (ASIO Only) – When this checkbox is enabled (and ASIO is selected in the Driver Type combo) then RealBand will take the ASIO input signal from input port number 1 and send it to output 1 so that you will hear the input through the speakers. You can apply real time effects to the monitored input by selected "Input" in the top combo box of the DirectX/VST Real Time Effects dialog. You can then select up to 4 DirectX or VST effects.

WARNING! - Do not enable this feature if the input port number 1 is set to record the output (e.g. "What you hear" or "Mix" )because enabling input monitoring in this case will cause massive feedback that could hurt your ears!

Allow IM Effects Recording – When this is enabled, and Input Monitoring is enabled, and effects plug-ins are enabled for input monitoring (as described above), the effected signal will be recorded instead of the dry signal.
----------------------------------------

The part most people struggle with is "You can apply real time effects to the monitored input by selected "Input" in the top combo box of the DirectX/VST Real Time Effects dialog"

It would read better if 'selected' was 'selecting' in the above directions.

You have to go to the Track you are using, Open DX FX, and where it lists the Track number (not the FX) scroll waaaaayyy down to find Input Monitor.

Last edited by rharv; 12/24/13 03:06 PM.
I do not work here, but the benefits are still awesome
Make your sound your own!