If a song has a mix of 3/4 and 4/4 time signatures, and needs to start in 3/4, it needs to use a 4/4 style and use F5 to set the first bar to 3/4. However, this means that the count-in will be in 4/4 when the song then actually starts in 3/4.
It seems to me that it would be a whole lot more practical if Band In A Box just produced the count-in using the same time-signature as the first bar of the song. If the first bar plays in 3/4, the count in should automatically be in 3/4. This would be a great improvement.
Hope others approve.
Regards Trevor
BIAB & RB2025 Win.(Audiophile), Sonar Platinum, Cakewalk by Bandlab, Izotope Prod.Bundle, Roland RD-1000, Synthogy Ivory, Kontakt, Focusrite 18i20, KetronSD2, NS40M Monitors, Pioneer Active Monitors, AKG K271 Studio H'phones
I remember the first time, after learning that I must use a 4/4 style if I wanted to have both 4/4 and 3/4, setting the first bar to 3/4 and getting a 4/4 count-in. Whoa.
BIAB 2025 Win Audiophile. Software: Studio One 7 Pro, Swam horns, Acoustica-7, Notion 6, Song Master Pro, Win 11 Home. Hardware: Intel i9, 32 Gb; Roland Integra-7, Presonus 192 & Faderport 8, Royer 121, Adam Sub8 & Neumann 120 monitors.
I remember the first time, after learning that I must use a 4/4 style if I wanted to have both 4/4 and 3/4, setting the first bar to 3/4 and getting a 4/4 count-in. Whoa.
Yes, totally agree Matt. Expecting a 3/4 count-in, but getting a 4 beat count-in and then immediately launching into a 3/4 song is very distracting. I got used to it but nevertheless there has to be a much nicer way.
Frankly, I don't think it would be incredibly difficult for the program to determine the time signature at the first bar and apply a count-in to suit. (2013.5 !!??)
BIAB & RB2025 Win.(Audiophile), Sonar Platinum, Cakewalk by Bandlab, Izotope Prod.Bundle, Roland RD-1000, Synthogy Ivory, Kontakt, Focusrite 18i20, KetronSD2, NS40M Monitors, Pioneer Active Monitors, AKG K271 Studio H'phones
Thinking further upon this, I can make a case for BIAB looking at the first several bars to determine the count-off, if the number of beats per bar varies and that variation repeats. And you should be able to override the program's choice.
For Take Five, where you might write repeating measures of 3 beats then 2 beats, it would be nice to get a count-in of 3, 2.
For another example, let's say we are writing out Blue Rondo a la Turk as measures with beats as follows: 2, 2, 2, 3. You might want to reproduce all four measures as the count-in. Or, perhaps you would be comfortable with a 4/4 count-in because of the transition from the bridge.
BIAB 2025 Win Audiophile. Software: Studio One 7 Pro, Swam horns, Acoustica-7, Notion 6, Song Master Pro, Win 11 Home. Hardware: Intel i9, 32 Gb; Roland Integra-7, Presonus 192 & Faderport 8, Royer 121, Adam Sub8 & Neumann 120 monitors.
Thinking further upon this, I can make a case for BIAB looking at the first several bars to determine the count-off, if the number of beats per bar varies and that variation repeats. And you should be able to override the program's choice.
For Take Five, where you might write repeating measures of 3 beats then 2 beats, it would be nice to get a count-in of 3, 2. (etc...)
Thanks Matt. Of course you are exactly correct, but I hope these additional technicalities don't get PG to put this in the too hard basket. I understand that the program works with limitations for songs containing bars with different time signatures, slicing off beats to get the correct value.
However, for these occassions, maybe a much easier way is to just provide an override option checkbox in the Song Settings dialog:
Any takers?
BIAB & RB2025 Win.(Audiophile), Sonar Platinum, Cakewalk by Bandlab, Izotope Prod.Bundle, Roland RD-1000, Synthogy Ivory, Kontakt, Focusrite 18i20, KetronSD2, NS40M Monitors, Pioneer Active Monitors, AKG K271 Studio H'phones
If I could expand on it why not make any number of beats available for a count-in? This would satisfy any time signature from 2/4 to 12/8 including 5/4 and such. This goes along with what Matt had said earlier.
When you are at the checkout line and they ask if you found everything say "Why, are you hiding stuff?"
64 bit Win 10 Pro, the latest BiaB/RB, Roland Octa-Capture audio interface, a ton of software/hardware
Thanks Guys for your endorsement. Yes, the mock-up is only a concept, and could definitely be improved on.
The key point is that the count-in could be tailored to suit each specific song, rather than relying on Global Settings. As mentioned, this would be great for songs in different time signatures (5/4 etc)
It might be something like:
BIAB & RB2025 Win.(Audiophile), Sonar Platinum, Cakewalk by Bandlab, Izotope Prod.Bundle, Roland RD-1000, Synthogy Ivory, Kontakt, Focusrite 18i20, KetronSD2, NS40M Monitors, Pioneer Active Monitors, AKG K271 Studio H'phones
Count-In based on actual time-signature of first bar
BUMP !!!! There has been absolute forum members agreement, not one objection, but nothing happened in about 3 years.
This is a really important issue. If the song starts in 3/4, please just provide a 3/4 count in. Just like every musician in the real world does.
(Instead of looking at the time-signature of the song to decide the count-in, just look at the time-signature of the first bar. C'mon team, not hard, surely?)
Please support this PGM. This is a Wishlist for Product Improvements, not a lucky-dip wishing well. There is a difference. Please support this pragmatic request.
BIAB & RB2025 Win.(Audiophile), Sonar Platinum, Cakewalk by Bandlab, Izotope Prod.Bundle, Roland RD-1000, Synthogy Ivory, Kontakt, Focusrite 18i20, KetronSD2, NS40M Monitors, Pioneer Active Monitors, AKG K271 Studio H'phones
This is a Wishlist for Product Improvements, not a lucky-dip wishing well.
Well, you could've fooled me!
Just because you can, doesn't mean you should! ---------------------------------------------------------------------- BBox 2022 Audiophile, Mac Pro Intel, OSX 10.6.8, 800x600 (TV VGA)
Band-in-a-Box® 2025 pour Windows est disponible en Français.
Le téléchargement se fait à partir du site PG Music
Pour ceux qui auraient déjà acheté la version 2025 de Band-in-a-Box (et qui donc ont une version anglaise), il est possible de "franciser" cette version avec les patchs suivants:
Band-in-a-Box 2025 für Windows Deutsch ist verfügbar!
Die deutsche Version Band-in-a-Box® 2025 für Windows ist ab sofort verfügbar!
Alle die bereits die englische Version von Band-in-a-Box und RealBand 2024 installiert haben, finden hier die Installationsdateien für das Sprachenupdate:
Update Your Band-in-a-Box® 2025 to Build 1128 for Windows Today!
Already using Band-in-a-Box 2025 for Windows®? Download Build 1128 now from our Support Page to enjoy the latest enhancements and improvements from our team.
Already using RealBand® 2025 for Windows®? Download Build 5 now from our Support Page to ensure you have the latest enhancements and improvements from our team.
PowerTracks Pro Audio 2025 is here! This new version introduces many features, including VST3 support, the ability to load or import a .FLAC file, a reset option for track height in the Tracks window, a taller Timeline on the Notation window toolbar, new freeze buttons in the Tracks window, three toolbar modes (two rows, single row, and none), the improved Select Patch dialog with text-based search and numeric patch display, a new button in the DirectX/VST window to copy an effects group, and more!
First-time packages start at only $49. Already a PowerTracks Pro Audio user? Upgrade for as little as $29!
Video: Summary of the New Band-in-a-Box® App for iOS®
Join Tobin as he takes you on a tour of the new Band-in-a-Box® app for iOS®! Designed for musicians, singer-songwriters, and educators, this powerful tool lets you create, play, and transfer songs effortlessly on your iPhone® or iPad®—anytime, anywhere.
One of our representatives will be happy to help you over the phone. Our hours of operation are from
6:00AM to 6:00PM PST (GMT -8) Monday thru Friday, and 8:00AM to 4:00PM PST Saturday. We are closed Sunday. You can also send us your questions via email.
One of our representatives will be happy to help you on our Live Chat or by email. Our hours of operation are from
6:00AM to 6:00PM PST (GMT -8) Monday thru Friday; 8:00AM to 4:00PM PST (GMT -8) Saturday; Closed Sunday.
Dansk
Deutsch - Windows
Español
Français - Windows
Italiano - Windows
Nederlands
Polski
Português
Svenskt
русский
Japanese
Simplified Chinese
Traditional Chinese
Korean