|
Log in to post
|
Print Thread |
|
|
|
|
|
Recording, Mixing, Performance and Production
|
Joined: Jan 2002
Posts: 7,913
Veteran
|
OP
Veteran
Joined: Jan 2002
Posts: 7,913 |
So, my new Focusrite Scarlett 18i8 has balanced 14" outs, and my rather cheap Fostex monitoring system has RCA inputs.
What would be the best cables that I could make or purchase for such a connection? Right now I have a couple of really cheap T/S 1/4" to RCA cables I bought from Radio Shack probably 10-15 years ago - you know the crappy gray plastic sheathed type that they sold then and perhaps still do today.
Is there a way to take advantage of the balanced jacks when the monitor system is really just +/- with the RCA connections?
|
|
|
|
|
|
|
|
|
|
|
|
|
Recording, Mixing, Performance and Production
|
Joined: Jan 2013
Posts: 1,331
Expert
|
|
Expert
Joined: Jan 2013
Posts: 1,331 |
Right now I have a couple of really cheap T/S 1/4" to RCA cables I bought from Radio Shack probably 10-15 years ago - you know the crappy gray plastic sheathed type that they sold then and perhaps still do today. Yes...they were like using thread rather than cable. I would recycle them. IMO...from experience... I would buy a well shielded 1/4" - RCA stereo cables. I've used Hosa for years and they work fine. I don't think the brand is as important as the gauge/shielding. Good luck....
|
|
|
|
|
|
|
|
|
|
|
|
|
Recording, Mixing, Performance and Production
|
Joined: Apr 2010
Posts: 5,139
Veteran
|
|
Veteran
Joined: Apr 2010
Posts: 5,139 |
So, my new Focusrite Scarlett 18i8 has balanced 14" outs, and my rather cheap Fostex monitoring system has RCA inputs.
What would be the best cables that I could make or purchase for such a connection? Right now I have a couple of really cheap T/S 1/4" to RCA cables I bought from Radio Shack probably 10-15 years ago - you know the crappy gray plastic sheathed type that they sold then and perhaps still do today.
Is there a way to take advantage of the balanced jacks when the monitor system is really just +/- with the RCA connections? You can use either balanced or unbalanced outputs on that unit. Which you use would depend on the monitor system. Is it balanced? 13. MONITOR OUTPUTS 1 and 2 – two balanced analogue line outputs on ¼” (6.35 mm) jack sockets; use TRS jacks for a balanced connection or TS jacks for unbalanced. These will generally be used for driving the main L and R speakers of your monitoring system; however, the signals at the outputs may be defined in Scarlett MixControl. As for cables, any decent quality cable will do. I use Monster. Regards, Bob
|
|
|
|
|
|
|
|
|
|
|
|
|
Recording, Mixing, Performance and Production
|
Joined: Jan 2002
Posts: 7,913
Veteran
|
|
OP
Veteran
Joined: Jan 2002
Posts: 7,913 |
@90 dB - no the inputs on the monitoring system are simply RCA inputs.
It's interesting that the Scarlett manual improperly refers to the plugs of the cables as jacks. At least that's what I'm reading.
|
|
|
|
|
|
|
|
|
|
|
|
|
Recording, Mixing, Performance and Production
|
Joined: Apr 2010
Posts: 5,139
Veteran
|
|
Veteran
Joined: Apr 2010
Posts: 5,139 |
@90 dB - no the inputs on the monitoring system are simply RCA inputs.
It's interesting that the Scarlett manual improperly refers to the plugs of the cables as jacks. At least that's what I'm reading.
Right - I understand that. So, all you need is two 1/4 phone jacks to two RCA jacks. Can be done with either cable or adapters. Cheapest way is to just use a standard stereo RCA cable (four male ends) and two RCA/1/4" adapters for the Focusrite outputs. All Radio Shack stuff. I wouldn't spend more than that - you probably won't notice the difference with a "cheap" monitoring system. 
Last edited by 90 dB; 01/29/14 06:49 AM.
|
|
|
|
|
|
|
|
|
|
|
|
|
Recording, Mixing, Performance and Production
|
Joined: May 2000
Posts: 38,502
Veteran
|
|
Veteran
Joined: May 2000
Posts: 38,502 |
...Right now I have a couple of really cheap T/S 1/4" to RCA cables I bought from Radio Shack probably 10-15 years ago - you know the crappy gray plastic sheathed type that they sold then and perhaps still do today.
Is there a way to take advantage of the balanced jacks when the monitor system is really just +/- with the RCA connections? Those cables are already wired properly to use the TS to RCA as Unbalanced, which is all that your monitors can take without rather expensive alternatives that are likely not needed. And - the old gray RadioShack "Lifetime Guarantee" cables may still be of good enough quality to use here. If, when the cables are hooked up to your system, with system turned ON and idling, as in no sound, and you mechanically disturb those cables by lightly slapping them on the desktop or the likes and you hear not too much noise from doing that, and provided you don't hear any buzzing, humming, or other noise from the idling system, things will work just fine over the short distance you are sending the unbalanced signal. "UnBalanced" Line does not inherently sound worse than Balanced Line connection, Internet Gurus and such be damned and ignored, they don't know what they are pontificating about, many confusing the fact that along with the Balanced connection often comes the higher amp;itude of the pro level Line voltage. So they hear "louder" and think, "better". In reality, all the user of a good clean unbalanced connect from sound device to monitors has to do is set their output level accordingly and enjoy fine audio. Balanced Line automatically rejects certain types of noise. The amount of noise you would pick up from a short run, such as from the sound device to the monitor input is and should be minimal to none in the properly designed system. The one thing to avoid with unbalanced cabling is having more length of cable than actually is needed to perform the connection between the two units with a bit of extra cabling left over for the sake of common sense. In other words, if your unbalanced cables are so long that you have to loop them up in order to do something with that extra cable length, go purchase two shorter unbalanced cable sets that can do the job and be done with it. Avoid the overpriced 'monster' cables and such that are just there to take yer money, too. Many of these actually have "features" such as RCA pins that are larger in diameter than specification. That may insure a tighter connection, but it also insures that your RCA Jacks will get stretched to the point where the standard size plugs will no longer be able to make good contact. Replacement of the jacks is a rather common problem today for the audio equipment service desk, a needless and rather expensive repair that could be avoided by simply purchasing a good quality middle of the road cable set. If the advertising for the cable mentions the word, "oxygen" - brother beware. --Mac
|
|
|
|
|
|
|
|
|
|
|
|
|
Recording, Mixing, Performance and Production
|
Joined: Jan 2002
Posts: 7,913
Veteran
|
|
OP
Veteran
Joined: Jan 2002
Posts: 7,913 |
All duly noted.
I really just wondered if there was a way to take advantage of the 'balanced' output on the Scarlett, with shielding of some type. Since the monitor inputs are RCA, I'm guessing that there's not much I can do. I do need to replace the gray Shack cables, they do make noise when bumping them around. I haven't used them for 3 years or so, when I bought the TASCAM. That's outta here, and the Scarlett sits pretty in it's place. The TASCAM had RCA outs.
I've never bought into expensive cable. I'm a bulk-lamp-cord guy from long ago for speaker cable. I learned that from the choir director I worked for as a volunteer back in the 80's. That guy could play piano like Andre Crouch or Floyd Cramer - depending on his mood, sing like Perry Como, repair anything from Peavey from the 70's-80's, was the earliest adopter of MIDI that I know personally (we had a Fender/Rhodes Chroma in the choir - right when they came out), made great and creative use of PZM mics when they first came out, etc. etc. etc. I learned many 'unconventional' use of microphones and audio gear from Roger. I made many long run speaker cables for our concerts with an old gun style soldering iron, bulk brown lamp cord and 1/4" plugs that we always had on hand in our old GMC 4104 and 4107 busses that we toured in. Roger did all the diesel engine and tranny work on those as well - to a point - routine maintenance stuff - but more than once I showed up at his house and he was up to his shoulders in grease!
|
|
|
|
|
|
|
|
|
|
|
|
|
Recording, Mixing, Performance and Production
|
Joined: Jun 2012
Posts: 20,935
Veteran
|
Veteran
Joined: Jun 2012
Posts: 20,935 |
All duly noted.
I've never bought into expensive cable. I'm a bulk-lamp-cord guy from long ago for speaker cable. I learned that from the choir director I worked for as a volunteer back in the 80's.
...
I made many long run speaker cables for our concerts with an old gun style soldering iron, bulk brown lamp cord and 1/4" plugs that we always had on hand in our old GMC 4104 and 4107 busses that we toured in.
Hmmm, speaker outputs are a whole different playing field. With outputs, we're almost always dealing with low impedance loads, and with PA systems often relatively high power levels are involved. High power means high current, and if there is series resistance in the circuit (i.e. long lengths of lamp cord), there will be a corresponding voltage drop loss across the cable, resulting in less available power to drive the speakers. Not saying that the lamp cord won't work, but it actually may be less than ideal in certain circumstances, especially 'long runs' to high power speaker systems. Hope this helps Cheers Trevor
BIAB & RB2026 Win.(Audiophile), Windows 10 Pro & Windows 11, Cakewalk Bandlab, Izotope Prod.Bundle, Roland RD-1000, Synthogy Ivory, Session Keys Grand S & Electric R, Kontakt, Focusrite 18i20, KetronSD2, NS40M, Pioneer Active Monitors.
|
|
|
|
|
|
|
|
|
|
|
|
|
Recording, Mixing, Performance and Production
|
Joined: Jun 2012
Posts: 20,935
Veteran
|
|
Veteran
Joined: Jun 2012
Posts: 20,935 |
Hmmm, speaker outputs are a whole different playing field. With outputs, we're almost always dealing with low impedance loads, and with PA systems often relatively high power levels are involved.
High power means high current, and if there is series resistance in the circuit (i.e. long lengths of lamp cord), there will be a corresponding voltage drop loss across the cable, resulting in less available power to drive the speakers.
Not saying that the lamp cord won't work, but it actually may be less than ideal in certain circumstances, especially 'long runs' to high power speaker systems.
Hope this helps
Cheers
Trevor
Addendum: This is not meant to say that you cannot successfully use such cables for this purpose, just make sure they are capable of performing the task.
BIAB & RB2026 Win.(Audiophile), Windows 10 Pro & Windows 11, Cakewalk Bandlab, Izotope Prod.Bundle, Roland RD-1000, Synthogy Ivory, Session Keys Grand S & Electric R, Kontakt, Focusrite 18i20, KetronSD2, NS40M, Pioneer Active Monitors.
|
|
|
|
|
|
|
|
|
|
|
|
|
Recording, Mixing, Performance and Production
|
Joined: Apr 2010
Posts: 5,139
Veteran
|
|
Veteran
Joined: Apr 2010
Posts: 5,139 |
"Not saying that the lamp cord won't work, but it actually may be less than ideal in certain circumstances, especially 'long runs' to high power speaker systems." Our longest speaker cables are 100'/ #12 ProCo's with Neutriks. No way I'm running lamp cord with my little rig!  We also have 25's and 50's, all ProCo. Not cheap, but we've never had one fail. Regards, Bob
|
|
|
|
|
|
|
|
|
|
|
|
|
Recording, Mixing, Performance and Production
|
Joined: May 2003
Posts: 8,021
Veteran
|
|
Veteran
Joined: May 2003
Posts: 8,021 |
All duly noted.
I've never bought into expensive cable. I'm a bulk-lamp-cord guy from long ago for speaker cable. I learned that from the choir director I worked for as a volunteer back in the 80's.
...
I made many long run speaker cables for our concerts with an old gun style soldering iron, bulk brown lamp cord and 1/4" plugs that we always had on hand in our old GMC 4104 and 4107 busses that we toured in.
Hmmm, speaker outputs are a whole different playing field. With outputs, we're almost always dealing with low impedance loads, and with PA systems often relatively high power levels are involved. High power means high current, and if there is series resistance in the circuit (i.e. long lengths of lamp cord), there will be a corresponding voltage drop loss across the cable, resulting in less available power to drive the speakers. Not saying that the lamp cord won't work, but it actually may be less than ideal in certain circumstances, especially 'long runs' to high power speaker systems. Hope this helps Cheers Trevor #14 100ft orange extension cord cut in half. Solder on new connectors.
|
|
|
|
|
|
|
|
|
|
|
|
|
Recording, Mixing, Performance and Production
|
Joined: Jul 2000
Posts: 27,408
Veteran
|
|
Veteran
Joined: Jul 2000
Posts: 27,408 |
I only buy the cables that the salesperson says will make the electrons go faster.
BIAB 2025 Win Audiophile. Software: Studio One 7 Pro, Swam horns, Acoustica-7, Notion 6, Song Master Pro, Win 11 Home. Hardware: Intel i9, 32 Gb; Presonus 192 & Faderport 8, Royer 121, Slate VSX, Adam Sub8 & Neumann 120 monitors.
|
|
|
|
|
|
|
|
|
|
|
|
|
Recording, Mixing, Performance and Production
|
Joined: Apr 2010
Posts: 5,139
Veteran
|
|
Veteran
Joined: Apr 2010
Posts: 5,139 |
I only buy the cables that the salesperson says will make the electrons go faster. Wow man. The amps all go to 11 and the electrons go really really fast! 
|
|
|
|
|
|
|
|
|
|
|
|
|
Recording, Mixing, Performance and Production
|
Joined: Jan 2002
Posts: 7,913
Veteran
|
|
OP
Veteran
Joined: Jan 2002
Posts: 7,913 |
All duly noted.
I've never bought into expensive cable. I'm a bulk-lamp-cord guy from long ago for speaker cable. I learned that from the choir director I worked for as a volunteer back in the 80's.
...
I made many long run speaker cables for our concerts with an old gun style soldering iron, bulk brown lamp cord and 1/4" plugs that we always had on hand in our old GMC 4104 and 4107 busses that we toured in.
Hmmm, speaker outputs are a whole different playing field. With outputs, we're almost always dealing with low impedance loads, and with PA systems often relatively high power levels are involved. High power means high current, and if there is series resistance in the circuit (i.e. long lengths of lamp cord), there will be a corresponding voltage drop loss across the cable, resulting in less available power to drive the speakers. Not saying that the lamp cord won't work, but it actually may be less than ideal in certain circumstances, especially 'long runs' to high power speaker systems. Hope this helps Cheers Trevor #14 100ft orange extension cord cut in half. Solder on new connectors. Done that as well!
|
|
|
|
|
|
|
|
|
|
|
|
|
Recording, Mixing, Performance and Production
|
Joined: Jun 2012
Posts: 20,935
Veteran
|
|
Veteran
Joined: Jun 2012
Posts: 20,935 |
I only buy the cables that the salesperson says will make the electrons go faster. Yep, those high-velocity 'electron phsyco-trimodulator' conductors are certainly the ones to use, oxygen-free - of course. And it's comforting to know that the same salespersons all have double-degrees in physics and nuclear sciences (I think it's an entry requirement).
BIAB & RB2026 Win.(Audiophile), Windows 10 Pro & Windows 11, Cakewalk Bandlab, Izotope Prod.Bundle, Roland RD-1000, Synthogy Ivory, Session Keys Grand S & Electric R, Kontakt, Focusrite 18i20, KetronSD2, NS40M, Pioneer Active Monitors.
|
|
|
|
|
|
|
|
|
|
|
|
|
Recording, Mixing, Performance and Production
|
Joined: Dec 2003
Posts: 24,186
Veteran
|
|
Veteran
Joined: Dec 2003
Posts: 24,186 |
I only buy the cables that the salesperson says will make the electrons go faster. It also helps if your output is higher than your input. Electrons go much faster downhill than they do going uphill.
I'm in a fitness protection program. I'm been hiding from exercise.
64 bit Win 10 Pro, the latest BiaB/RB, Roland Octa-Capture audio interface, a ton of software/hardware
|
|
|
|
|
|
|
|
|
|
|
|
|
Recording, Mixing, Performance and Production
|
Joined: May 2000
Posts: 38,502
Veteran
|
|
Veteran
Joined: May 2000
Posts: 38,502 |
Know why there are two prongs to every electric circuit?
That is because we do not buy electrons, we can only RENT them and then they go back home.
--Mac
|
|
|
|
|
|
|
|
|
|
|
|
|
Recording, Mixing, Performance and Production
|
Joined: Jan 2002
Posts: 7,913
Veteran
|
|
OP
Veteran
Joined: Jan 2002
Posts: 7,913 |
"Not saying that the lamp cord won't work, but it actually may be less than ideal in certain circumstances, especially 'long runs' to high power speaker systems." Our longest speaker cables are 100'/ #12 ProCo's with Neutriks. No way I'm running lamp cord with my little rig! We also have 25's and 50's, all ProCo. Not cheap, but we've never had one fail. Regards, Bob Keep in mind this was LOOOONGGGG before Neutrik twist-lock style connectors were de rigeur on speakers. I'm talking Peavey floor wedge monitors with cloth grilles and the silver dust cones and plywood cases, and Bose 801s for mains, on tripods that weighed probably 50 lbs. each, etc. This choir was a non-profit and ran on a VERY thin budget. Heavy duty lamp cord had/has a whole bunch of copper in it from a cross-section/gauge standpoint and took teenage abuse pretty well. I love Neutrik twist-lock for both speaker and mains supply cable connectors, but such a thing did not exist in the US in the 70's which is when we likely sourced those Peavey's floor wedges. I'd like it for guitar and instrument cables as well to eliminate pop from bridging tip/sleeve on insert/removal, as that's one big benefit of those connectors - they do immediate connect/disconnect of both sides of the signal without shorting across T/S. Planet Waves sells a 'switched' cable that does the same: http://www.sweetwater.com/store/detail/PWCBGtr20A/
|
|
|
|
|
|
|
|
|
|
|
|
|
Recording, Mixing, Performance and Production
|
Joined: May 2000
Posts: 22,425
Veteran
|
|
Veteran
Joined: May 2000
Posts: 22,425 |
That is because we do not buy electrons, we can only RENT them ... giggle Kinda like beer
I do not work here, but the benefits are still awesome
Make your sound your own!
|
|
|
|
|
|
|
|
|
|
|
|
|
Recording, Mixing, Performance and Production
|
Joined: Jun 2012
Posts: 20,935
Veteran
|
|
Veteran
Joined: Jun 2012
Posts: 20,935 |
RHarv:
You have a PM
Thanks
Trevor
BIAB & RB2026 Win.(Audiophile), Windows 10 Pro & Windows 11, Cakewalk Bandlab, Izotope Prod.Bundle, Roland RD-1000, Synthogy Ivory, Session Keys Grand S & Electric R, Kontakt, Focusrite 18i20, KetronSD2, NS40M, Pioneer Active Monitors.
|
|
|
|
|
|
|
|
|
|
|
|
Ask sales and support questions about Band-in-a-Box using natural language.
ChatPG's knowledge base includes the full Band-in-a-Box User Manual and sales information from the website.
|
|
|
|
|
|
|
|
|
|
|
Band-in-a-Box 2026 for Windows Special Offers End Tomorrow (January 15th, 2026) at 11:59 PM PST!
Time really is running out! Save up to 50% on Band-in-a-Box® 2026 for Windows® upgrades and receive a FREE Bonus PAK—only when you order by 11:59 PM PST on Thursday, January 15, 2026!
We've added many major new features and new content in a redesigned Band-in-a-Box® 2026 for Windows®!
Version 2026 introduces a modernized GUI redesign across the program, with updated toolbars, refreshed windows, smoother workflows, and a new Dark Mode option. There’s also a new side toolbar for quicker access to commonly used windows, and the new Multi-View feature lets you arrange multiple windows as layered panels without overlap, making it easier to customize your workspace.
Another exciting new addition is the new AI-Notes feature, which can transcribe polyphonic audio into MIDI. You can view the results in notation or play them back as MIDI, and choose whether to process an entire track or focus on specific parts like drums, bass, guitars/piano, or vocals. There's over 100 new features in Band-in-a-Box® 2026 for Windows®.
There's an amazing collection of new content too, including 202 RealTracks, new RealStyles, MIDI SuperTracks, Instrumental Studies, “Songs with Vocals” Artist Performance Sets, Playable RealTracks Set 5, two RealDrums Stems sets, XPro Styles PAK 10, Xtra Styles PAK 21, and much more!
Upgrade your Band-in-a-Box for Windows to save up to 50% on most Band-in-a-Box® 2026 upgrade packages!
Plus, when you order your Band-in-a-Box® 2026 upgrade during our special, you'll receive a Free Bonus PAK of exciting new add-ons.
If you need any help deciding which package is the best option for you, just let us know. We are here to help!
Band-in-a-Box® 2026 for Windows® Special Offers Extended Until January 15, 2026!
Good news! You still have time to upgrade to the latest version of Band-in-a-Box® for Windows® and save. Our Band-in-a-Box® 2026 for Windows® special now runs through January 15, 2025!
We've packed Band-in-a-Box® 2026 with major new features, enhancements, and an incredible lineup of new content! The program now sports a sleek, modern GUI redesign across the entire interface, including updated toolbars, refreshed windows, smoother workflows, a new dark mode option, and more. The brand-new side toolbar provides quicker access to key windows, while the new Multi-View feature lets you arrange multiple windows as layered panels without overlap, creating a flexible, clutter-free workspace. We have an amazing new “AI-Notes” feature. This transcribes polyphonic audio into MIDI so you can view it in notation or play it back as MIDI. You can process an entire track (all pitched instruments and drums) or focus on individual parts like drums, bass, guitars/piano, or vocals. There's an amazing collection of new content too, including 202 RealTracks, new RealStyles, MIDI SuperTracks, Instrumental Studies, “Songs with Vocals” Artist Performance Sets, Playable RealTracks Set 5, two RealDrums Stems sets, XPro Styles PAK 10, Xtra Styles PAK 21, and much more!
There are over 100 new features in Band-in-a-Box® 2026 for Windows®.
When you order purchase Band-in-a-Box® 2026 before 11:59 PM PST on January 15th, you'll also receive a Free Bonus PAK packed with exciting new add-ons.
Upgrade to Band-in-a-Box® 2026 for Windows® today! Check out the Band-in-a-Box® packages page for all the purchase options available.
Happy New Year!
Thank you for being part of the Band-in-a-Box® community.
Wishing you and yours a very happy 2026—Happy New Year from all of us at PG Music!
Season's Greetings!
Wishing everyone a happy, healthy holiday season—thanks for being part of our community!
The office will be closed for Christmas Day, but we will be back on Boxing Day (Dec 26th) at 6:00am PST.
Team PG
Band-in-a-Box 2026 Video: The Newly Designed Piano Roll Window
In this video, we explore the updated Piano Roll, complete with a modernized look and exciting new features. You’ll see new filtering options that make it easy to focus on specific note groups, smoother and more intuitive note entry and editing, and enhanced options for zooming, looping, and more.
Watch the video.
You can see all the 2026 videos on our forum!
Band-in-a-Box 2026 Video: AI Stems & Notes - split polyphonic audio into instruments and transcribe
This video demonstrates how to use the new AI-Notes feature together with the AI-Stems splitter, allowing you to select an audio file and have it separated into individual stems while transcribing each one to its own MIDI track. AI-Notes converts polyphonic audio—either full mixes or individual instruments—into MIDI that you can view in notation or play back instantly.
Watch the video.
You can see all the 2026 videos on our forum!
Bonus PAK and 49-PAK for Band-in-a-Box® 2026 for Windows®
With your version 2026 for Windows Pro, MegaPAK, UltraPAK, UltraPAK+, Audiophile Edition or PlusPAK purchase, we'll include a Bonus PAK full of great new Add-ons for FREE! Or upgrade to the 2026 49-PAK for only $49 to receive even more NEW Add-ons including 20 additional RealTracks!
These PAKs are loaded with additional add-ons to supercharge your Band-in-a-Box®!
This Free Bonus PAK includes:
- The 2026 RealCombos Booster PAK:
-For Pro customers, this includes 27 new RealTracks and 23 new RealStyles.
-For MegaPAK customers, this includes 25 new RealTracks and 23 new RealStyles.
-For UltraPAK customers, this includes 12 new RealStyles.
- MIDI Styles Set 92: Look Ma! More MIDI 15: Latin Jazz
- MIDI SuperTracks Set 46: Piano & Organ
- Instrumental Studies Set 24: Groovin' Blues Soloing
- Artist Performance Set 19: Songs with Vocals 9
- Playable RealTracks Set 5
- RealDrums Stems Set 9: Cool Brushes
- SynthMaster Sounds Set 1 (with audio demos)
- Android Band-in-a-Box® App (included)
Looking for more great add-ons, then upgrade to the 2026 49-PAK for just $49 and you'll get:
- 20 Bonus Unreleased RealTracks and RealDrums with 20 RealStyle.
- FLAC Files (lossless audio files) for the 20 Bonus Unreleased RealTracks and RealDrums
- MIDI Styles Set 93: Look Ma! More MIDI 16: SynthMaster
- MIDI SuperTracks Set 47: More SynthMaster
- Instrumental Studies 25 - Soul Jazz Guitar Soloing
- Artist Performance Set 20: Songs with Vocals 10
- RealDrums Stems Set 10: Groovin' Sticks
- SynthMaster Sounds & Styles Set 2 (sounds & styles with audio demos)
Learn more about the Bonus PAKs for Band-in-a-Box® 2026 for Windows®!
|
|
|
|
|
|
|
|
|
|
|
|
Forums57
Topics85,570
Posts793,423
Members39,914
| |
Most Online25,754
Jan 24th, 2025
|
|
|
|
|
|
|
|
|
Dansk
Deutsch - Windows
Español
Français - Windows
Italiano - Windows
Nederlands
Polski
Português
Svenskt
русский
Japanese
Simplified Chinese
Traditional Chinese
Korean