Originally Posted By: Mac
Something's wrong IMO.

At this point, I would certainly try the Return to Factory Settings command located under the Options menu.

I would choose button two, which is the one that not only resets critical internal file settings, but also re-invokes the MIDI/Audio Selection Wizard.


--Mac


I did exactly as you advised above, Mac -- and it's still not working. I get no sounds at all with the ASIO driver (ASIO4ALL). (MME driver works, but with bad latency).

In the ASIO Audio Drivers Window, I've selected ASIO4All v2, checked "ASIO Always On", but the Ouput Port says "(0,1) Not Connected 1 + Not Connected 2". Perhaps that's the problem? If so, I don't understand what's causing it. Note that ASIO4ALL works fine with the standalone version of Pianoteq, so I doubt that it's a driver problem. (ie - running Pianoteq outside of BIAB).

Also, the full text of the yellow pop-up window that I referenced in the previous post is: "DXI output will be silent because the ASIO4ALL driver is not connected, possibly because of using a soft synth for MIDI output such as GS Wavetable or running another Audio Program like Windows Media Player". I'm not running another audio program concurrently with BIAB. Unless I have an unknown audio program loading upon system boot-up that I don't know about....Is there a way to check that?

I'm stumped - but that's nothing new for me.

Thanks for your help (and patience) with this!

Kawai VPC1 MIDI Controller; Asus A53E Laptop running Windows 7 - 64 bit; BIAB 2017 UltraPlusPak (upgraded from 2014 EverythingPak), running from Laptop's Hard Drive.