RAX 2.1.2 (demo version) can be downloaded from:
http://www.versiontracker.com/php/dlpage...2FRax_v1254.dmg

Get some free VSTi’s:
http://www.hitsquad.com/smm/freeware/mac/

------------------------------------------------------------------------------------------------------------------------------------
Here are some basic steps. Note that these instructions may vary if you are using different versions of Band-in-a-Box and RAX.
------------------------------------------------------------------------------------------------------------------------------------
1. Open Band-in-a-Box

2. Click on MIDI | ** Select MIDI Driver or Apple DLS Synth…

3. Select ‘MasOS X CoreMIDI’ and click [OK]

4. Set the Bass output to ‘Rax 1’ and click [<-- Set all ports to this]

5. Click [ok]

---------------------------
Now you can set up RAX
---------------------------

1. Open RAX.

2. In the ‘Instruments’ section at the bottom, click on ‘add instrument’

3. You can go to ‘Apple’ and choose ‘DLSMusicDevice’ or a different section to add a VSTi(any installed VSTi’s should be listed under the name of the company that makes them)

4. For each instrument, set the channel number on the far right below ‘MIDI’ (the channel to receive MIDI from – set it to ‘Any’ if you want it to receive from more than one channel)

5. If you need to change which channels Band-in-a-Box outputs on, click on MIDI | MIDI Settings…

Blake

PG Music Inc.