I can record a melody with my Yamaha WX-5 wind synth, but when I try to apply harmonies to it, it only puts harmonies on a note once in a while. Ut doesn't apply them to all the notes, in fact it only does it for maybe 1 out of every 10 notes. However if I plug my midi keyboard into it and play the same melody, and use the same harmonies, it works correctly and applies the harmony to every note played. The main reason I bought BIAB 2009 is to play melodies with my wind synth, create harmonies with them, and then use the Garritan JABB to get the real horn sounds for a real horn section to my tunes.

I looked at he manual for the WX5 and played with a lot of the dip switch settings and I still have the same problem.

I found this in the faq

"I am having trouble recording into Band-in-a-Box with my Wind Controller.

When using a wind controller with a computer program, make sure to filter out most of the MIDI information that is sent from the controller. The default settings have an 'avalanche' of MIDI information, which can take up much of the CPU time reading it, or overwhelm the MIDI buffer. Other than that, you should be able to use it as a normal controller. There are Record Filter settings in Band-in-a-Box that can allow you to choose to ignore much of the MIDI information that gets sent."

When looking at my record filter settings the "note", "sustain" and "pitch bend" boxes are checked. Any ideas on what to try for the rec filter?

I downloaded the Demo before I spent $500 bucks on the BIAB 2009 Ultrapak with Garritan JABB and I had the same issue but they told me it was just because it was the demo version. Obviously that wasn't the case because I still have the same issue. I hope I can resolve this issue since this is the main reason I bought the software.

Any ideas?

Thanks
Dan