I use an Oxygen 49 Midi Controller and set it up as follows:

Select Oxygen 49 as the INPUT driver but do not select for OUTPUT otherwise you will get continuing echoes as the Midi data is circulated around the system.

I Always use Channel 1 in both the Controller and for the appropriate RB Track. It is easy to change the Channel number in RB.

Set up the Midi Controller to select the same Patch number as shown for the RB Track.

Recording is easy - just set up the track as above and select REC icon.

Lastly use an ASIO driver to reduce any latency

Hope this helps.

Last edited by LynB; 10/14/14 03:56 AM.