Originally Posted By: Frank Alves
Bob,
I have this one:

http://www.sweetwater.com/store/detail/S...6bLcaAn_58P8HAQ

Frank




Frank,

You stated in your OP that you just need to record your guitar/amp into your computer. In that case, you don't need an interface. From Fender:


"There's a line output for recording direct, or for plugging directly into a live sound system. You can also connect to your computer via USB, for direct speaker-emulated digital recording. And once you download the free Fender FUSE software, you'll be able to edit the amp voicings and effects to your exact tonal requirements!"


Try downloading the free FUSE software from Fender and plug your amp's USB output directly into your computer. The DL link is below:

https://fuse.fender.com/


p.s. Here is the FUSE manual:

http://support.fender.com/manuals/software/fender_software/fender_fuse/FenderFUSE_v2.x_(SuperChampX2)_revA_English.pdf


Regards,

Bob

Last edited by 90 dB; 10/22/14 11:54 AM. Reason: p,s,
Dyslectics Untie!


https://90dbband.bandcamp.com/

https://soundcloud.com/90-db

https://www.youtube.com/channel/UCm_3mpivKYV7T7XFJmXL-GA