|
Log in to post
|
Print Thread |
|
|
|
|
|
RealBand
|
Joined: May 2012
Posts: 2,934
Veteran
|
OP
Veteran
Joined: May 2012
Posts: 2,934 |
Hi All
I have been doing quite a bit of reading about side chain comression and was wondering if anybody had any sucess using this concept in Realband?
For those who are not familiar with the concept it is that a gain reduction is automatically applied to one track based on a signal from another track. Similar to what a DJ would use to automatically reduce the gain on the music while talking into the mike.
I would love to use this in my mixing.
Last edited by JosieC; 10/25/14 05:28 AM.
|
|
|
|
|
|
|
|
|
|
|
|
|
RealBand
|
Joined: Dec 2011
Posts: 3,353
Veteran
|
|
Veteran
Joined: Dec 2011
Posts: 3,353 |
Hi Joanne.
Yes, it's a very useful technique. It's also called "Ducking" when it's used to reduce the volume of a track which has a voice-over - the music metaphorically ducks it's head!
Having said that, I don't think it's possible with RealBand at the moment. We'd need Re-wire, or something like that which could route signals within the program and this has been on the wish-list as long as I can remember.
Maybe someone out there knows a work-around? rharv, where are you?
ROG.
|
|
|
|
|
|
|
|
|
|
|
|
|
RealBand
|
Joined: Apr 2009
Posts: 10,669
Veteran
|
|
Veteran
Joined: Apr 2009
Posts: 10,669 |
I have been aware of this for many years but really never felt the need to use it. Good solid recording techniques and mixing will, for most styles of music and cases, be more than sufficient.
DJ's and radio stations use this so that when the announcer or DJ speaks into the mic, the music, or the caller's voice (in talk radio) is lowered so that the main voice can easily be heard.
If you use this in music, you certainly want to use it carefully so as to avoid the pumping that would naturally come from it's use.
Most full featured DAW's accommodate this easily.
You can find my music at: www.herbhartley.comAdd nothing that adds nothing to the music. You can make excuses or you can make progress but not both. The magic you are looking for is in the work you are avoiding.
|
|
|
|
|
|
|
|
|
|
|
|
|
RealBand
|
Joined: May 2012
Posts: 2,934
Veteran
|
|
OP
Veteran
Joined: May 2012
Posts: 2,934 |
Hi Herb and Roger
I thought I many not have much luck with this feature being available in RealBand. Tis a pity.
Unfortunately I don’t have the budget (or perhaps the patience) to invest in a new DAW at this stage of my life.
I have read that this technique can be used to easily bring a vocal forward if it is competing with another instrument. Seems easier than manual editing or using volume envelopes. Obviously only a judicious amount of gain change would be applied to avoid pumping.
|
|
|
|
|
|
|
|
|
|
|
|
|
RealBand
|
Joined: Dec 2003
Posts: 24,059
Veteran
|
Veteran
Joined: Dec 2003
Posts: 24,059 |
Josie, a little compression and EQ can be used to bring the vocal more out front.
I'm in a fitness protection program. I'm been hiding from exercise.
64 bit Win 10 Pro, the latest BiaB/RB, Roland Octa-Capture audio interface, a ton of software/hardware
|
|
|
|
|
|
|
|
|
|
|
|
|
RealBand
|
Joined: Jun 2012
Posts: 3,853
Veteran
|
|
Veteran
Joined: Jun 2012
Posts: 3,853 |
Unfortunately I don’t have the budget (or perhaps the patience) to invest in a new DAW at this stage of my life. Download Reaper and give it a test drive. It is free to try and has no time limit or feature/function limit during the trial. When you do decide to purchase it only costs $60! Lots of folks here use it and can help you out. Watch an hour or so of free tutorials and I bet you'll be as comfortable with Reaper as you are with RealBand! And then when you want to use a modern technique like side chain compression you can just do it! And I'll bet you'll really enjoy the streamlined interface on Reaper too! I save so much time because it works in a modern way like most other 21st century software!  Reaper Download http://www.reaper.fm/download.phpFree Tutorials http://tutorialsforreaper.com/category/tutorials/https://www.youtube.com/user/TutorialsForReaperhttps://www.google.com/?gws_rd=ssl#q=reaper%20tutorials%20free
|
|
|
|
|
|
|
|
|
|
|
|
|
RealBand
|
Joined: Jun 2000
Posts: 2,497
Veteran
|
|
Veteran
Joined: Jun 2000
Posts: 2,497 |
I've not tired this (I have lots of external compressors/FX/mixers, Sonar X3 and most of the other usual SW suspects. In other words, I have multiple ways to skin that cat in real time or post production) and would have to ponder a while on the best "how to" with this Rube Goldberg approach BUT Audacity is free http://audacity.sourceforge.net/it has a built in "Audio Duck" app already (I've used it for "over dubbing/inserting" of narrative audio onto already recorded live operational test audio; nothing to do with music). Besides what Audacity makes available for free there numerous other free compressor plug-ins out there (with SSB/ducking, etc.). Just bring all audio in into Audacity and select tracks to duck and the control track (I assume a vocal track but could be anything) do the "ducking and then bring whole thing back into RB if needed - may not even be necessary. Is this a "final" track mix? Technically you could "master" in Audacity - it can use all your PC's existing VST plugins? In any case, I hope you can get some variation of RB, your other existing commercial apps, and the plethora of free apps out there to do what you want without shelling out 'mo mony. Good Luck Larry
Last edited by Larry Kehl; 10/27/14 02:53 PM.
Win10Pro,i9,64GB,2TBSSD+20TBHDDs,1080TI,BIAB'24,Scarlett18i8,Montage7,Fusion 8HD,QS8,Integra7,XV5080,QSR,SC-8850,SPLAT,FL21&others,Komp.14,IK suite&others, just a guitar player-AXE FX III &FM9T, FishmanTP, MIDIGuitar2, GK2/3'sw/GI20
|
|
|
|
|
|
|
|
|
|
|
|
|
RealBand
|
Joined: May 2000
Posts: 22,391
Veteran
|
|
Veteran
Joined: May 2000
Posts: 22,391 |
Reaper ReaComp can be used in RB and should do as desired. It may take a little tinkering with to set up the control track, but should not be impossible. In Reacomp it's called the Detector Input. It's a free download for the set of free ReaPlugins. http://www.reaper.fm/reaplugs/
I do not work here, but the benefits are still awesome
Make your sound your own!
|
|
|
|
|
|
|
|
|
|
|
|
|
RealBand
|
Joined: May 2012
Posts: 2,934
Veteran
|
|
OP
Veteran
Joined: May 2012
Posts: 2,934 |
Hi J*3 and Larry
Thanks for the info but I think for me right now, changing away from Realband to use this feature will be a little like throwing out the baby out with the bathwater because Realband is so integrated into my workflow.
If you are interested my workflow is as follows:
I do the basic structure of the song in BIAB. Then I open the song in Realband and record the vocals and harmonies (three of each). I then mix the vocals to just the drum, rhythm and drum tracks while also messing about with the bass, drums and rhythm instruments to see what suits the song best. Sometimes I don’t use any of the tracks originally used in BIAB but generate new tracks for all the instruments. I do the mixing in Realband, adding and deleting instruments to “sweeten” the mix. To do the rough mix I use Real band’s volume envelopes but once I am happy with the basic mix I will manually apply gain changes and fades (I find the volume envelopes sometimes do some weird things with the sound!). Once I am happy with the mix I output the song to WAV file, open Realband again and apply Ozone to the WAV file. Save the WAV file and import it into Audacity to convert to MP3.
Hi Mario. Thanks, yes I am already using EQ and compression but find I am often manually reducing the volume of some tracks as well. It would be nice for this to happen automatically.
Hi Rahv. Thanks so much! I am going to give that a try.
|
|
|
|
|
|
|
|
|
|
|
|
|
RealBand
|
Joined: Apr 2009
Posts: 10,669
Veteran
|
|
Veteran
Joined: Apr 2009
Posts: 10,669 |
If you use any DAW that supports volume envelopes and sub busses, you can accomplish exactly what you need.
Every song I work on and practically every track in it.... even drums and bass, use volume envelopes even if it's just to fade that last held chord or note.
That makes it easy to pull things down and push them up in the mix as needed. I add the nodes manually and set all the levels the same way..... totally by ear. As the song is in playback, I have "Automation read" enabled and the levels change instantly and automatically.
Sometimes, I even find that in spite of my envelopes, after the mix is pretty close to being done, I have the levels on the band too high to get the vocals to their proper level in the final mix. This is where a full featured DAW that supports sub bussing comes in real handy. Most of the time, at this point, I like the mix and the levels between the instruments. So having to rework all the envelopes lower would be time consuming at best.
I simply insert a new stereo buss and call it "Band" and then I route all the instruments and /or other sub busses into that new buss. Now, it's a simple matter of turning that busses' volume down as far as needed, and then the vocal track/buss is at the right level without having to do anything else.
As I pointed out in my first post above, if you do things right, the need to sidechain the compression becomes moot in most (but not all) cases. Yes, there is a time and place where side chaining is the best answer. Certainly, learn about this technique if you wish, since the more you know about things the more adept at this whole mixing and recording hobby you will become. I know what it is.... but have never come across the need to use it. I treat all compression with care, knowing that a heavy hand on the knob of the compressor can easily ruin an otherwise good mix. New enthusiasts tend to go heavy on compression because it can make the mix loud. And yeah, it sounds good, but too much of a good thing isn't always a good thing.
BTW: Sonar's Music Creator 6 is also a good inexpensive DAW that supports everything I discussed. It's selling for around $50. I used MC4 for many years when I first was getting back into digital recording. MC is totally capable but has synth number limitations and track limits. Neither of which will affect most hobby recording enthusiasts with our smaller and even larger projects. I've never come close to topping it out. 8 synths at a time, 48 audio tracks, 256 midi tracks..... IIRC.
If you're not in a big hurry, it really pays to drop in on the cakewalk store about once a week. A few months ago, cakewalk was running MC6T on sale for $20..... It had some folks speculating about what was going on with Cake & the MC line.
EDIT: I just checked the cakewalk store and if your computer's OS is Vista or XP, you can still get Music Creator 6 (XP/Vista) for $20 ...... That is what I call a "No Brainer" price.
Last edited by Guitarhacker; 10/28/14 04:19 AM.
You can find my music at: www.herbhartley.comAdd nothing that adds nothing to the music. You can make excuses or you can make progress but not both. The magic you are looking for is in the work you are avoiding.
|
|
|
|
|
|
|
|
|
|
|
|
|
RealBand
|
Joined: May 2012
Posts: 2,934
Veteran
|
|
OP
Veteran
Joined: May 2012
Posts: 2,934 |
Hi Herb
I think this may be turning out to be a discussion on which DAW and why, which is never a bad thing so I'll just continue on that vein.
I think for me the huge plus about Realband is the ability to generate and regenerate real tracks on the fly without having to go back to BIAB to do it. Realband allows me to very easily generate new instruments and include small or large pieces at any stage of the mixing process. I don’t think you can do this with another DAW (but I could be wrong!). This is probably the biggest reason I am not thinking about changing my DAW at this early stage of my development.
I must say I was a bit disappointed with the volume envelopes in Realband as they definitely do something weird with the sounds but I have persevered and despite that problem I have found a work around that works okay for me.
This is turning into an Interesting thread though.
|
|
|
|
|
|
|
|
|
|
|
|
|
RealBand
|
Joined: May 2000
Posts: 22,391
Veteran
|
|
Veteran
Joined: May 2000
Posts: 22,391 |
I think for me the huge plus about Realband is the ability to generate and regenerate real tracks on the fly without having to go back to BIAB to do it. Realband allows me to very easily generate new instruments and include small or large pieces at any stage of the mixing process. I don’t think you can do this with another DAW (but I could be wrong!). This is probably the biggest reason I am not thinking about changing my DAW at this early stage of my development.
zactly When you can go back and regenerate parts (or add parts) it is a HUGE plus. With your workflow (much like mine) I think you have an anchor point. Don't discard the other DAW suggestions, but use them when you need them. I find quite often I am better off staying in RB until I 'need to move'. Even then I may end up back in RB .. which is why I put a lot of effort into learning what I COULD do with it, instead of worrying about what I couldn't. Yeah, DAW A supports this, and DAW B supports that .. but what RB supports seems to outweigh the others a lot of the time for me. Clicking a track and regenerating = precious!
I do not work here, but the benefits are still awesome
Make your sound your own!
|
|
|
|
|
|
|
|
|
|
|
|
|
RealBand
|
Joined: May 2012
Posts: 2,934
Veteran
|
|
OP
Veteran
Joined: May 2012
Posts: 2,934 |
Yeah, DAW A supports this, and DAW B supports that .. but what RB supports seems to outweigh the others a lot of the time for me.
Clicking a track and regenerating = precious!
I totally agree. Quickly selecting a brand new instrument and generating to hear what it sound like in the mix = priceless
Last edited by JosieC; 10/28/14 09:01 PM.
|
|
|
|
|
|
|
|
|
|
|
|
|
RealBand
|
Joined: Apr 2009
Posts: 10,669
Veteran
|
|
Veteran
Joined: Apr 2009
Posts: 10,669 |
Most folks already know but for those who don't...
I use 3 programs to get to where I want to be in my music.
BB, RB & Sonar. All 3 have specific jobs. Each one has unique strengths, but they all have weaknesses as well. Just use what you need in it's strong area and move to something else to use it's strong area.
The right tool for the job at hand.
You can find my music at: www.herbhartley.comAdd nothing that adds nothing to the music. You can make excuses or you can make progress but not both. The magic you are looking for is in the work you are avoiding.
|
|
|
|
|
|
|
|
|
|
|
|
|
RealBand
|
Joined: Jun 2012
Posts: 3,853
Veteran
|
|
Veteran
Joined: Jun 2012
Posts: 3,853 |
Most folks already know but for those who don't...
I use 3 programs to get to where I want to be in my music.
BB, RB & Sonar. All 3 have specific jobs. Each one has unique strengths, but they all have weaknesses as well. Just use what you need in it's strong area and move to something else to use it's strong area.
The right tool for the job at hand. +1 I could hammer a nail with my Martin but I choose to lay it down and use a hammer instead! 
|
|
|
|
|
|
|
|
|
|
|
|
|
RealBand
|
Joined: Aug 2006
Posts: 8,672
Veteran
|
|
Veteran
Joined: Aug 2006
Posts: 8,672 |
All in all as Herb mentioned volume envelopes and such are more effective than side chaining for track volume control.
"Ducking" to me would affect the tonal quality of the track, more than just the volume levels.
HP Win 11 12 gig ram, Mac mini Sonoma with 16 gig of ram, BiaB 2025, Realband, Reaper 7, Harrison Mixbus 9 32c , Melodyne 5 editor, Presonus Audiobox 1818VSL, Presonus control app.
|
|
|
|
|
|
|
|
|
|
|
|
Ask sales and support questions about Band-in-a-Box using natural language.
ChatPG's knowledge base includes the full Band-in-a-Box User Manual and sales information from the website.
|
|
|
|
|
|
|
|
|
|
|
Band-in-a-Box 2026 Video: The Newly Designed Piano Roll Window
In this video, we explore the updated Piano Roll, complete with a modernized look and exciting new features. You’ll see new filtering options that make it easy to focus on specific note groups, smoother and more intuitive note entry and editing, and enhanced options for zooming, looping, and more.
Watch the video.
You can see all the 2026 videos on our forum!
Band-in-a-Box 2026 Video: AI Stems & Notes - split polyphonic audio into instruments and transcribe
This video demonstrates how to use the new AI-Notes feature together with the AI-Stems splitter, allowing you to select an audio file and have it separated into individual stems while transcribing each one to its own MIDI track. AI-Notes converts polyphonic audio—either full mixes or individual instruments—into MIDI that you can view in notation or play back instantly.
Watch the video.
You can see all the 2026 videos on our forum!
Bonus PAK and 49-PAK for Band-in-a-Box® 2026 for Windows®
With your version 2026 for Windows Pro, MegaPAK, UltraPAK, UltraPAK+, Audiophile Edition or PlusPAK purchase, we'll include a Bonus PAK full of great new Add-ons for FREE! Or upgrade to the 2026 49-PAK for only $49 to receive even more NEW Add-ons including 20 additional RealTracks!
These PAKs are loaded with additional add-ons to supercharge your Band-in-a-Box®!
This Free Bonus PAK includes:
- The 2026 RealCombos Booster PAK:
-For Pro customers, this includes 27 new RealTracks and 23 new RealStyles.
-For MegaPAK customers, this includes 25 new RealTracks and 23 new RealStyles.
-For UltraPAK customers, this includes 12 new RealStyles.
- MIDI Styles Set 92: Look Ma! More MIDI 15: Latin Jazz
- MIDI SuperTracks Set 46: Piano & Organ
- Instrumental Studies Set 24: Groovin' Blues Soloing
- Artist Performance Set 19: Songs with Vocals 9
- Playable RealTracks Set 5
- RealDrums Stems Set 9: Cool Brushes
- SynthMaster Sounds Set 1 (with audio demos)
- Android Band-in-a-Box® App (included)
Looking for more great add-ons, then upgrade to the 2026 49-PAK for just $49 and you'll get:
- 20 Bonus Unreleased RealTracks and RealDrums with 20 RealStyle.
- FLAC Files (lossless audio files) for the 20 Bonus Unreleased RealTracks and RealDrums
- MIDI Styles Set 93: Look Ma! More MIDI 16: SynthMaster
- MIDI SuperTracks Set 47: More SynthMaster
- Instrumental Studies 25 - Soul Jazz Guitar Soloing
- Artist Performance Set 20: Songs with Vocals 10
- RealDrums Stems Set 10: Groovin' Sticks
- SynthMaster Sounds & Styles Set 2 (sounds & styles with audio demos)
Learn more about the Bonus PAKs for Band-in-a-Box® 2026 for Windows®!
Video: New User Interface (GUI)
Join Tobin as he takes you on a tour of the new user interface in Band-in-a-Box® 2026 for Windows®! This modern GUI redesign offers a sleek new look with updated toolbars, refreshed windows, and a smoother workflow. The brand-new side toolbar puts track selection, the MultiPicker Library, and other essential tools right at your fingertips. Plus, our upgraded Multi-View lets you layer multiple windows without overlap, giving you a highly flexible workspace. Many windows—including Tracks, Piano Roll, and more—have been redesigned for improved usability and a cleaner, more intuitive interface, and more!
Watch the video.
You can see all the 2026 videos on our forum!
Introducing XPro Styles PAK 10 – Now Available for Windows Band-in-a-Box 2025 and Higher!
We've just released XPro Styles PAK 10 for Windows & Mac Band-in-a-Box version 2025 (and higher) with 100 brand new RealStyles, plus 28 RealTracks and RealDrums!
Few things are certain in life: death, taxes, and a brand spankin’ new XPro Styles PAK! In this, the 10th edition of our XPro Styles PAK series, we’ve got 100 styles coming your way! We have the classic 25 styles each from the rock & pop, jazz, and country genres, and rounding out this volume's wildcard slot is 25 styles in the Praise & Worship genre! A wide spanning genre, you can find everything from rock, folk, country, and more underneath its umbrella. The included 28 RealTracks and RealDrums can be used with any Band-in-a-Box® 2026 (and higher) package.
Here’s just a small sampling of what you can look forward to in XPro Styles PAK 10: Soft indie folk worship songs, bumpin’ country boogies, gospel praise breaks, hard rockin’ pop, funky disco grooves, smooth Latin jazz pop, bossa nova fusion, western swing, alternative hip-hop, cool country funk, and much more!
Special offers until December 31st, 2025!
All the XPro Styles PAKs 1 - 10 are on sale for only $29 ea (Reg. $49 ea), or get them all in the XPro Styles PAK Bundle for only $149 (reg. $299)! Order now!
Learn more and listen to demos of XPro Styles PAKs.
Video: XPro Styles PAK 10 Overview & Styles Demos: Watch now!
XPro Styles PAKs require Band-in-a-Box® 2025 or higher and are compatible with ANY package, including the Pro, MegaPAK, UltraPAK, UltraPAK+, and Audiophile Edition.
Introducing Xtra Styles PAK 21 – Now Available for Windows Band-in-a-Box 2025 and Higher!
Xtra Styles PAK 21 for Windows & Mac Band-in-a-Box version 2025 (and higher) is here with 200 brand new RealStyles!
We're excited to bring you our latest Xtra Styles PAK installment—the all new Xtra Styles PAK 21 for Band-in-a-Box version 2025 (and higher)!
Rejoice, one and all, for Xtra Styles PAK 21 for Band-in-a-Box® is here! We’re serving up 200 brand spankin’ new styles to delight your musical taste buds! The first three courses are the classics you’ve come to know and love, including offerings from the rock & pop, jazz, and country genres, but, not to be outdone, this year’s fourth course is bro country! A wide ranging genre, you can find everything from hip-hop, uptempo outlaw country, hard hitting rock, funk, and even electronica, all with that familiar bro country flair. The dinner bell has been rung, pickup up Xtra Styles PAK 21 today!
In this PAK you’ll discover: Energetic folk rock, raucous train beats, fast country boogies, acid jazz grooves, laid-back funky jams, a bevy of breezy jazz waltzes, calm electro funk, indie synth pop, industrial synth metal, and more bro country than could possibly fit in the back of a pickup truck!
Special offers until December 31st, 2025!
All the Xtra Styles PAKs 1 - 21 are on special for only $29 each (reg $49), or get all 21 PAKs for $199 (reg $399)! Order now!
Learn more and listen to demos of the Xtra Styles PAK 21.
Video: Xtra Styles PAK 21 Overview & Styles Demos: Watch now!
Note: The Xtra Styles require the UltraPAK, UltraPAK+, or Audiophile Edition of Band-in-a-Box®. (Xtra Styles PAK 21 requires the 2025 or higher UltraPAK, UltraPAK+, or Audiophile Edition. They will not work with the Pro or MegaPAK version because they need the RealTracks from the UltraPAK, UltraPAK+, or Audiophile Edition.
Introducing XPro Styles PAK 10 – Now Available for Mac Band-in-a-Box 2025 and Higher!
We've just released XPro Styles PAK 10 for Mac & Windows Band-in-a-Box version 2025 (and higher) with 100 brand new RealStyles, plus 28 RealTracks and RealDrums!
Few things are certain in life: death, taxes, and a brand spankin’ new XPro Styles PAK! In this, the 10th edition of our XPro Styles PAK series, we’ve got 100 styles coming your way! We have the classic 25 styles each from the rock & pop, jazz, and country genres, and rounding out this volume's wildcard slot is 25 styles in the Praise & Worship genre! A wide spanning genre, you can find everything from rock, folk, country, and more underneath its umbrella. The included 28 RealTracks and RealDrums can be used with any Band-in-a-Box® 2026 (and higher) package.
Here’s just a small sampling of what you can look forward to in XPro Styles PAK 10: Soft indie folk worship songs, bumpin’ country boogies, gospel praise breaks, hard rockin’ pop, funky disco grooves, smooth Latin jazz pop, bossa nova fusion, western swing, alternative hip-hop, cool country funk, and much more!
Special offers until December 31st, 2025!
All the XPro Styles PAKs 1 - 10 are on sale for only $29 ea (Reg. $49 ea), or get them all in the XPro Styles PAK Bundle for only $149 (reg. $299)! Order now!
Learn more and listen to demos of XPro Styles PAKs.
Video: XPro Styles PAK 10 Overview & Styles Demos: Watch now!
XPro Styles PAKs require Band-in-a-Box® 2025 or higher and are compatible with ANY package, including the Pro, MegaPAK, UltraPAK, UltraPAK+, and Audiophile Edition.
|
|
|
|
|
|
|
|
|
|
|
|
Forums57
Topics85,375
Posts791,398
Members39,867
| |
Most Online25,754
Jan 24th, 2025
|
|
|
|
|
|
|
|
|
|
|
|
There are no members with birthdays on this day. |
|
|
|
|
|
|
|
|
Dansk
Deutsch - Windows
Español
Français - Windows
Italiano - Windows
Nederlands
Polski
Português
Svenskt
русский
Japanese
Simplified Chinese
Traditional Chinese
Korean