Hi,

Are you sure you have set it up in the Audio MIDI Setup window? To get there, go to /Applications/Utilities/Audio MIDI Setup (or you can choose the menu option in Band-in-a-Box). You should see a MIDI interface icon there, that is connected to an "external device" with a cable. You would just need the one cable going from the output on the device to the input on the interface. Click the Test Setup button, and play your controller. If that doesn't do anything or if you don't see an interface there at all, then perhaps you have to install software from the manufacturer.

If you get it configured properly there, open Band-in-a-Box and you should be able to choose the input in the CoreMIDI-choose ports dialog. (If Band-in-a-Box was open and you made a change in the Audio MIDI Setup window, quite and restart the program.


Andrew
PG Music Inc.