|
Log in to post
|
Print Thread |
|
|
|
|
|
Recording, Mixing, Performance and Production
|
Joined: Jul 2013
Posts: 217
Apprentice
|
OP
Apprentice
Joined: Jul 2013
Posts: 217 |
This is going to sound like a really dumb question but I will not get an answer if I do not ask.
I recorded mono tracks from my line 6 podxt into my Tascam interface. One went to the left , the other to the right. If I try to pan them to the opposite side the signal disappears. I would not normally do that but if I wanted to change the mix in such a way as to say bring both guitars to the right side I can not do it in real band. I always thought a mono signal can be panned anywhere in the plain.
Thanks Rich
BIAB 2018 latest build, Window 10 Pro 64 bit operating system
X64 based processor
Intel(R) Xeon(R) CPU ES-2670 @ 2.60GHz
16 Gigs Ram
Tascam 2x2 audio interface. Podxt
|
|
|
|
|
|
|
|
|
|
|
|
|
Recording, Mixing, Performance and Production
|
Joined: Apr 2010
Posts: 5,139
Veteran
|
|
Veteran
Joined: Apr 2010
Posts: 5,139 |
This is going to sound like a really dumb question but I will not get an answer if I do not ask.
I recorded mono tracks from my line 6 podxt into my Tascam interface. One went to the left , the other to the right. If I try to pan them to the opposite side the signal disappears. I would not normally do that but if I wanted to change the mix in such a way as to say bring both guitars to the right side I can not do it in real band. I always thought a mono signal can be panned anywhere in the plain.
Thanks Rich Hey Rich. There are no dumb questions. "I recorded mono tracks from my line 6 podxt into my Tascam interface. One went to the left , the other to the right." Not enough information. After the Tascam, where did you actually 'record' the mono tracks? If you set your panning full counterclockwise (left) you were only recording on the left channel. Did you set up the tracks to record in stereo? Quick fix is no big deal. Just bounce the mono track to a stereo track. Faux Stereo, to be sure, but it can save a lot of time. Regards, Bob
|
|
|
|
|
|
|
|
|
|
|
|
|
Recording, Mixing, Performance and Production
|
Joined: Jul 2013
Posts: 217
Apprentice
|
|
OP
Apprentice
Joined: Jul 2013
Posts: 217 |
The mono tracks were recorded to real band via usb from the 2 channel Tascam interface. The tracks were panned center at the time I made the two recordings. This is why I am confused. I tried using a usb connection from the line 6 directly to the computer but could not produce a signal. I assume I would need to reconfigure something on the computer to make it work that way.
If I am sending a mono signal how do I set the track up to be in stereo?
Last edited by Rich59; 12/30/14 03:25 AM.
BIAB 2018 latest build, Window 10 Pro 64 bit operating system
X64 based processor
Intel(R) Xeon(R) CPU ES-2670 @ 2.60GHz
16 Gigs Ram
Tascam 2x2 audio interface. Podxt
|
|
|
|
|
|
|
|
|
|
|
|
|
Recording, Mixing, Performance and Production
|
Joined: Apr 2010
Posts: 5,139
Veteran
|
|
Veteran
Joined: Apr 2010
Posts: 5,139 |
"If I am sending a mono signal how do I set the track up to be in stereo?" "If you are recording audio, you can record either mono (left or right) or in stereo. To access these settings, go to Options | Preferences | Audio. If you are recording both left and right channels, and your audio track is set as a MONO Audio track, the left and right channels will be recorded on to consecutive tracks. If your track is a STEREO Audio track, then both channels will appear on a single track." http://www.pgmusic.com/techfaq27.htm#13p.s. Unless you are recording the source with two separate mics, you are not really getting "true stereo" anyway. Want a huge guitar sound? Run that Pod into an amp and put two mics on the amp. One right on the cone, one back about 4'. Record both tracks in stereo.Add salt and shake.  Regards, Bob
Last edited by 90 dB; 12/30/14 05:34 AM. Reason: p.s.
|
|
|
|
|
|
|
|
|
|
|
|
|
Recording, Mixing, Performance and Production
|
Joined: Dec 2013
Posts: 2,732
Veteran
|
|
Veteran
Joined: Dec 2013
Posts: 2,732 |
If I try to pan them to the opposite side the signal disappears. That part sounds like a phasing issue. You could flip the phase on one side to keep that from happening.
 Steve BIAB/RB 2022, Pro Tools 2020, Korg N5, JBL LSR 4328 Powered Monitors, AKG/Shure Mics.
PC: Win11 PRO, 4 TB M2 SSD, 2 TB HD, 128 GB Memory
|
|
|
|
|
|
|
|
|
|
|
|
|
Recording, Mixing, Performance and Production
|
Joined: Jul 2013
Posts: 217
Apprentice
|
|
OP
Apprentice
Joined: Jul 2013
Posts: 217 |
Thanks guys.
90 db. I believe you answered my question. I will also have to try out your amp technique. Am I to assume the mikes are placed near the cones edge?
Thanks again
Rich
Last edited by Rich59; 12/30/14 06:53 AM.
BIAB 2018 latest build, Window 10 Pro 64 bit operating system
X64 based processor
Intel(R) Xeon(R) CPU ES-2670 @ 2.60GHz
16 Gigs Ram
Tascam 2x2 audio interface. Podxt
|
|
|
|
|
|
|
|
|
|
|
|
|
Recording, Mixing, Performance and Production
|
Joined: Jul 2000
Posts: 27,363
Veteran
|
|
Veteran
Joined: Jul 2000
Posts: 27,363 |
Just to elaborate on what Steve said about phasing: if you have two equal signals on the left and right, that's OK. But if one of them has the polarity reversed, they will actually cancel each other out and you hear nothing when they are combined. Another cause of this is using two mics that are the (wrong) distance apart such that the waves from the two are inverted and produce a flat line when summed. This is one reason why mic placement with multiple mics is important. I'm oversimplifying but you get the point...
BIAB 2025 Win Audiophile. Software: Studio One 7 Pro, Swam horns, Acoustica-7, Notion 6, Song Master Pro, Win 11 Home. Hardware: Intel i9, 32 Gb; Presonus 192 & Faderport 8, Royer 121, Slate VSX, Adam Sub8 & Neumann 120 monitors.
|
|
|
|
|
|
|
|
|
|
|
|
|
Recording, Mixing, Performance and Production
|
Joined: Apr 2010
Posts: 5,139
Veteran
|
|
Veteran
Joined: Apr 2010
Posts: 5,139 |
Thanks guys.
90 db. I believe you answered my question. I will also have to try out your amp technique. Am I to assume the mikes are placed near the cones edge?
Thanks again
Rich
1st mic (SM57/58) about 2-3" from outer speaker surround. Wear phones and move it around while playing to find the sweet spot. 2nd mic (pref. condenser) above and about 4' from the amp. Send to separate stereo mixer/DAW channels, and mix/EQ to taste. 1st (close) mic picks up the amp. 2nd mic picks up the amp in the room. Regards, Bob
|
|
|
|
|
|
|
|
|
|
|
|
|
Recording, Mixing, Performance and Production
|
Joined: Jul 2013
Posts: 217
Apprentice
|
|
OP
Apprentice
Joined: Jul 2013
Posts: 217 |
Thanks again.
Matt I am not using mics at this point. I am using the left and right outputs of the podxt. I am aware of phase issues although I have yet to experiment with two mics. All good info IMHO.
BIAB 2018 latest build, Window 10 Pro 64 bit operating system
X64 based processor
Intel(R) Xeon(R) CPU ES-2670 @ 2.60GHz
16 Gigs Ram
Tascam 2x2 audio interface. Podxt
|
|
|
|
|
|
|
|
|
|
|
|
|
Recording, Mixing, Performance and Production
|
Joined: Apr 2009
Posts: 10,673
Veteran
|
|
Veteran
Joined: Apr 2009
Posts: 10,673 |
It sounds to me like you are recording mono source into a stereo track.
In the window where you select the inputs, be sure to select either side....right or left as opposed to "stereo" input. In my rig, I have several options and one of them is "stereo".
ALWAYS, always select only the ONE SIDE.... in my case, just for no particular reason, I always ALWAYS choose the LEFT Saffire audio input. (Saffire being my interface's name)
When I forget that step .....and BTW.... it defaults to the stereo input in my rig....and I hit record.... I see a stereo wave getting recorded and on playback I can not pan to the opposite side.... because there is no audio information in that opposite side.
Ensure that you record mono source to a track set up for ONE SIDE MONO and things should work perfectly. The mono track will be naturally recorded dead center and will be pannable to either the right or left side of the sound field.
Doing what you describe in the OP..... be sure that again, you have the tracks (plural) set up as mono..... one right, one left in the Tascam. Send the signals into the Tascam and ensure that they are going to different tracks. You will end up with 2 mono tracks that you can pan as needed. I can do this with my 2 channel Focusrite Saffire interface..... for example, one channel is voice, and the other is acoustic guitar..... I can place each into a mono track independent of each other at the same time. Afterward, I can pan either as needed to either side. The key is to ensure everything in the chain is mono, from the signal to the final track.
Should you mistakenly record into a stereo track in the DAW..... most DAW's have the ability to create mono tracks from stereo tracks. A simple conversion gets you there.
You can find my music at: www.herbhartley.comAdd nothing that adds nothing to the music. You can make excuses or you can make progress but not both. The magic you are looking for is in the work you are avoiding.
|
|
|
|
|
|
|
|
|
|
|
|
|
Recording, Mixing, Performance and Production
|
Joined: Aug 2011
Posts: 10,932
Veteran
|
|
Veteran
Joined: Aug 2011
Posts: 10,932 |
Rich59,
The PodXT (version 1) manual indicates both the left and right pod outputs are mono.
|
|
|
|
|
|
|
|
|
|
|
|
Ask sales and support questions about Band-in-a-Box using natural language.
ChatPG's knowledge base includes the full Band-in-a-Box User Manual and sales information from the website.
|
|
|
|
|
|
|
|
|
|
|
Season's Greetings!
Wishing everyone a happy, healthy holiday season—thanks for being part of our community!
The office will be closed for Christmas Day, but we will be back on Boxing Day (Dec 26th) at 6:00am PST.
Team PG
Band-in-a-Box 2026 Video: The Newly Designed Piano Roll Window
In this video, we explore the updated Piano Roll, complete with a modernized look and exciting new features. You’ll see new filtering options that make it easy to focus on specific note groups, smoother and more intuitive note entry and editing, and enhanced options for zooming, looping, and more.
Watch the video.
You can see all the 2026 videos on our forum!
Band-in-a-Box 2026 Video: AI Stems & Notes - split polyphonic audio into instruments and transcribe
This video demonstrates how to use the new AI-Notes feature together with the AI-Stems splitter, allowing you to select an audio file and have it separated into individual stems while transcribing each one to its own MIDI track. AI-Notes converts polyphonic audio—either full mixes or individual instruments—into MIDI that you can view in notation or play back instantly.
Watch the video.
You can see all the 2026 videos on our forum!
Bonus PAK and 49-PAK for Band-in-a-Box® 2026 for Windows®
With your version 2026 for Windows Pro, MegaPAK, UltraPAK, UltraPAK+, Audiophile Edition or PlusPAK purchase, we'll include a Bonus PAK full of great new Add-ons for FREE! Or upgrade to the 2026 49-PAK for only $49 to receive even more NEW Add-ons including 20 additional RealTracks!
These PAKs are loaded with additional add-ons to supercharge your Band-in-a-Box®!
This Free Bonus PAK includes:
- The 2026 RealCombos Booster PAK:
-For Pro customers, this includes 27 new RealTracks and 23 new RealStyles.
-For MegaPAK customers, this includes 25 new RealTracks and 23 new RealStyles.
-For UltraPAK customers, this includes 12 new RealStyles.
- MIDI Styles Set 92: Look Ma! More MIDI 15: Latin Jazz
- MIDI SuperTracks Set 46: Piano & Organ
- Instrumental Studies Set 24: Groovin' Blues Soloing
- Artist Performance Set 19: Songs with Vocals 9
- Playable RealTracks Set 5
- RealDrums Stems Set 9: Cool Brushes
- SynthMaster Sounds Set 1 (with audio demos)
- Android Band-in-a-Box® App (included)
Looking for more great add-ons, then upgrade to the 2026 49-PAK for just $49 and you'll get:
- 20 Bonus Unreleased RealTracks and RealDrums with 20 RealStyle.
- FLAC Files (lossless audio files) for the 20 Bonus Unreleased RealTracks and RealDrums
- MIDI Styles Set 93: Look Ma! More MIDI 16: SynthMaster
- MIDI SuperTracks Set 47: More SynthMaster
- Instrumental Studies 25 - Soul Jazz Guitar Soloing
- Artist Performance Set 20: Songs with Vocals 10
- RealDrums Stems Set 10: Groovin' Sticks
- SynthMaster Sounds & Styles Set 2 (sounds & styles with audio demos)
Learn more about the Bonus PAKs for Band-in-a-Box® 2026 for Windows®!
Video: New User Interface (GUI)
Join Tobin as he takes you on a tour of the new user interface in Band-in-a-Box® 2026 for Windows®! This modern GUI redesign offers a sleek new look with updated toolbars, refreshed windows, and a smoother workflow. The brand-new side toolbar puts track selection, the MultiPicker Library, and other essential tools right at your fingertips. Plus, our upgraded Multi-View lets you layer multiple windows without overlap, giving you a highly flexible workspace. Many windows—including Tracks, Piano Roll, and more—have been redesigned for improved usability and a cleaner, more intuitive interface, and more!
Watch the video.
You can see all the 2026 videos on our forum!
Introducing XPro Styles PAK 10 – Now Available for Windows Band-in-a-Box 2025 and Higher!
We've just released XPro Styles PAK 10 for Windows & Mac Band-in-a-Box version 2025 (and higher) with 100 brand new RealStyles, plus 28 RealTracks and RealDrums!
Few things are certain in life: death, taxes, and a brand spankin’ new XPro Styles PAK! In this, the 10th edition of our XPro Styles PAK series, we’ve got 100 styles coming your way! We have the classic 25 styles each from the rock & pop, jazz, and country genres, and rounding out this volume's wildcard slot is 25 styles in the Praise & Worship genre! A wide spanning genre, you can find everything from rock, folk, country, and more underneath its umbrella. The included 28 RealTracks and RealDrums can be used with any Band-in-a-Box® 2026 (and higher) package.
Here’s just a small sampling of what you can look forward to in XPro Styles PAK 10: Soft indie folk worship songs, bumpin’ country boogies, gospel praise breaks, hard rockin’ pop, funky disco grooves, smooth Latin jazz pop, bossa nova fusion, western swing, alternative hip-hop, cool country funk, and much more!
Special offers until December 31st, 2025!
All the XPro Styles PAKs 1 - 10 are on sale for only $29 ea (Reg. $49 ea), or get them all in the XPro Styles PAK Bundle for only $149 (reg. $299)! Order now!
Learn more and listen to demos of XPro Styles PAKs.
Video: XPro Styles PAK 10 Overview & Styles Demos: Watch now!
XPro Styles PAKs require Band-in-a-Box® 2025 or higher and are compatible with ANY package, including the Pro, MegaPAK, UltraPAK, UltraPAK+, and Audiophile Edition.
Introducing Xtra Styles PAK 21 – Now Available for Windows Band-in-a-Box 2025 and Higher!
Xtra Styles PAK 21 for Windows & Mac Band-in-a-Box version 2025 (and higher) is here with 200 brand new RealStyles!
We're excited to bring you our latest Xtra Styles PAK installment—the all new Xtra Styles PAK 21 for Band-in-a-Box version 2025 (and higher)!
Rejoice, one and all, for Xtra Styles PAK 21 for Band-in-a-Box® is here! We’re serving up 200 brand spankin’ new styles to delight your musical taste buds! The first three courses are the classics you’ve come to know and love, including offerings from the rock & pop, jazz, and country genres, but, not to be outdone, this year’s fourth course is bro country! A wide ranging genre, you can find everything from hip-hop, uptempo outlaw country, hard hitting rock, funk, and even electronica, all with that familiar bro country flair. The dinner bell has been rung, pickup up Xtra Styles PAK 21 today!
In this PAK you’ll discover: Energetic folk rock, raucous train beats, fast country boogies, acid jazz grooves, laid-back funky jams, a bevy of breezy jazz waltzes, calm electro funk, indie synth pop, industrial synth metal, and more bro country than could possibly fit in the back of a pickup truck!
Special offers until December 31st, 2025!
All the Xtra Styles PAKs 1 - 21 are on special for only $29 each (reg $49), or get all 21 PAKs for $199 (reg $399)! Order now!
Learn more and listen to demos of the Xtra Styles PAK 21.
Video: Xtra Styles PAK 21 Overview & Styles Demos: Watch now!
Note: The Xtra Styles require the UltraPAK, UltraPAK+, or Audiophile Edition of Band-in-a-Box®. (Xtra Styles PAK 21 requires the 2025 or higher UltraPAK, UltraPAK+, or Audiophile Edition. They will not work with the Pro or MegaPAK version because they need the RealTracks from the UltraPAK, UltraPAK+, or Audiophile Edition.
|
|
|
|
|
|
|
|
|
|
|
|
Forums57
Topics85,427
Posts791,881
Members39,884
| |
Most Online25,754
Jan 24th, 2025
|
|
|
|
|
|
|
|
|
Dansk
Deutsch - Windows
Español
Français - Windows
Italiano - Windows
Nederlands
Polski
Português
Svenskt
русский
Japanese
Simplified Chinese
Traditional Chinese
Korean