|
Log in to post
|
Print Thread |
|
|
|
|
|
RealBand
|
Joined: Oct 2008
Posts: 8,109
Veteran
|
OP
Veteran
Joined: Oct 2008
Posts: 8,109 |
Before I bother support.. does anybody recall this happening before.. and maybe a solution?
When I first boot up and start RB, no problem.
If I run BIAB first, then open RB I get the following error messages:
"THE ASIO SAMPLE RATE IS NOT SUPPORTED BY ONE OF THE USB INTERFACES... PLEASE CHECK YOUR SYNCH SETTINGS IN CONTROL PANEL"
(everything in control panel is set the same as in RB)
then as soon as that error is gone, I get:
"YOUR ASIO DRIVER IS A MAC BASED FORMAT... THIS PROGRAM DOES NOT SUPPORT MAC BASED FORMATS"
(that error repeats 3 times in a row)
Then I get this error:
"ERROR STARTING ASIO DRIVER... IF ERROR PERSISTS RESTART WINDOWS"
Restarting windows does fix it, but it happens so predictably, I have to wonder what's causing it.
I should probably add that If I start RB right after bootup and everything works fine, then close it and reopen immediately... I get the same cluster of errors.
Any thoughts?
I have the latest driver for the audio interface (which is an M-Audio Ozone keyboard)
Computer is DELL Inspiron 8 Gigs ram, Windows 7 Home Premium, build 7601
|
|
|
|
|
|
|
|
|
|
|
|
|
RealBand
|
Joined: Oct 2008
Posts: 8,109
Veteran
|
|
OP
Veteran
Joined: Oct 2008
Posts: 8,109 |
I should also mention that if I exit both RB and BIAB, no program should be using ASIO. But if I turn off my audio interface, the PC locks up and I eventually get a blue screen. This is the same thing that has always happened if I turn off the audio interface while its in use.
Its as though the programs aren't releasing ASIO when I exit.
|
|
|
|
|
|
|
|
|
|
|
|
|
RealBand
|
Joined: May 2000
Posts: 22,455
Veteran
|
|
Veteran
Joined: May 2000
Posts: 22,455 |
Sounds like the 'System' may be reserving the ASIO driver, and being a 'one man dog' the next application suffers. Especially if it happens in multiple apps.
I do not work here, but the benefits are still awesome
Make your sound your own!
|
|
|
|
|
|
|
|
|
|
|
|
|
RealBand
|
Joined: Oct 2008
Posts: 8,109
Veteran
|
|
OP
Veteran
Joined: Oct 2008
Posts: 8,109 |
Good point... can you recommend a workaround? Reboot? Always?
That would be a pain, but I like it better than the blue screen I'm getting
is there a time requirement for windows to relinquish control? Maybe I'm just jumpin' the gun...?
|
|
|
|
|
|
|
|
|
|
|
|
|
RealBand
|
Joined: Apr 2009
Posts: 10,725
Veteran
|
|
Veteran
Joined: Apr 2009
Posts: 10,725 |
That's one I would be calling tech for the answers.
You can find my music at: www.herbhartley.comAdd nothing that adds nothing to the music. You can make excuses or you can make progress but not both. The magic you are looking for is in the work you are avoiding.
|
|
|
|
|
|
|
|
|
|
|
|
|
RealBand
|
Joined: Oct 2008
Posts: 8,109
Veteran
|
|
OP
Veteran
Joined: Oct 2008
Posts: 8,109 |
I am dead in the water here. for some reason my email won't send new messages... so I can't email PGMusic about it. I tried calling, but they just give a recorded message and there is no opportunity to wait for an available operator. After the recorded message the call ends. I tried live chat... but that's apparently for software installation help, not tech problems. He told me to call the toll free number with the recorded message. I guess next step is to contact my ISP and find out why my email won't email. I hate when you have to solve one problem before you can solve another problem so you can solve another problem 
|
|
|
|
|
|
|
|
|
|
|
|
|
RealBand
|
Joined: Dec 2002
Posts: 12,789
Veteran
|
|
Veteran
Joined: Dec 2002
Posts: 12,789 |
Pat, why do you need ASIO for BIAB? Can't you get by with MME and then save the ASIO driver for RB where you need it for recording? I run BIAB (MME) concurrent with Reaper and reserve the ASIO for Reaper. Would that work for you?
BIAB – 2026, Reaper (current), i7-12700F Processor, 32GB DDR4-3200MHz RAM, Motu Audio Express 6x6 - My SoundCloud.
|
|
|
|
|
|
|
|
|
|
|
|
|
RealBand
|
Joined: Dec 2002
Posts: 12,789
Veteran
|
|
Veteran
Joined: Dec 2002
Posts: 12,789 |
By the way, what audio interface? ..and what ASIO? Is it current?
Oh, and remember I have not yet installed my BIAB2015....
BIAB – 2026, Reaper (current), i7-12700F Processor, 32GB DDR4-3200MHz RAM, Motu Audio Express 6x6 - My SoundCloud.
|
|
|
|
|
|
|
|
|
|
|
|
|
RealBand
|
Joined: Jul 2000
Posts: 3,161
Veteran
|
|
Veteran
Joined: Jul 2000
Posts: 3,161 |
Hi Pat
I remember that I had a funny message when I first opened BIAB 2015 which suggested that I had compatibility problems with my ASIO driver and the program. The message suggested that I check the advanced settings in the Control Panel for Sound Playback/Record in Windows. I found that in the Advanced Pages, for the devices I was using. that they had been set to a default 24 bit studio quality. I changed this to 16 bit CD Quality and have had no problems since.
There are still oddities. I now cannot use MME drivers in BIAB and ASIO Drivers in RB - they work better with ASIO selected in both programs.
The current soundcard was installed some 12 months ago and has operated flawlessly until the above.
Last edited by LynB; 01/17/15 11:27 PM.
|
|
|
|
|
|
|
|
|
|
|
|
|
RealBand
|
Joined: Oct 2008
Posts: 8,109
Veteran
|
|
OP
Veteran
Joined: Oct 2008
Posts: 8,109 |
Thanks Lyn! Sounds exactly like my symptoms... I'll look at this.. I appreciate your help!
Interesting , though, that the same device with the same windows settings does not generate any errors when used with BIAB... only with RB
|
|
|
|
|
|
|
|
|
|
|
|
|
RealBand
|
Joined: Oct 2008
Posts: 8,109
Veteran
|
|
OP
Veteran
Joined: Oct 2008
Posts: 8,109 |
Hi Pat
I remember that I had a funny message when I first opened BIAB 2015 which suggested that I had compatibility problems with my ASIO driver and the program. The message suggested that I check the advanced settings in the Control Panel for Sound Playback/Record in Windows. I found that in the Advanced Pages, for the devices I was using. that they had been set to a default 24 bit studio quality. I changed this to 16 bit CD Quality and have had no problems since.
Lyn, as a followup to your suggestion: I went back to control panel to check the windows configuration of the audio interface. I thought I had already made sure they were alike, but apparently not. Windows said 24bit, RB said 16bit. So I changed everything to 16 bit. But even after restarting windows, returning to factory settings etc I still get error messages. So I switched to a different audio interface and the error went away. Must have been something about the previous device that RB didn't like.
|
|
|
|
|
|
|
|
|
|
|
|
|
RealBand
|
Joined: Jun 2012
Posts: 21,021
Veteran
|
|
Veteran
Joined: Jun 2012
Posts: 21,021 |
What was the previous Audio Interface Pat?
BIAB & RB2026 Win.(Audiophile), Windows 10 Pro & Windows 11, Cakewalk Bandlab, Izotope Prod.Bundle, Roland RD-1000, Synthogy Ivory, Session Keys Grand S & Electric R, Kontakt, Focusrite 18i20, KetronSD2, NS40M, Pioneer Active Monitors.
|
|
|
|
|
|
|
|
|
|
|
|
|
RealBand
|
Joined: Oct 2008
Posts: 8,109
Veteran
|
|
OP
Veteran
Joined: Oct 2008
Posts: 8,109 |
previous interface was an M-audio oxygen MIDI controller/audio interface
New interface is a Focusrite Scarlett 2i4
But today I'm getting different results. The scarlett has no problems running ASIO in BIAB, but in RB if I switch from MME to ASIO it sounds very slow and distorted.
It doesn't make sense that it runs fine BIAB but not in RB
|
|
|
|
|
|
|
|
|
|
|
|
|
RealBand
|
Joined: Dec 2003
Posts: 24,285
Veteran
|
|
Veteran
Joined: Dec 2003
Posts: 24,285 |
previous interface was an M-audio oxygen MIDI controller/audio interface
New interface is a Focusrite Scarlett 2i4
But today I'm getting different results. The scarlett has no problems running ASIO in BIAB, but in RB if I switch from MME to ASIO it sounds very slow and distorted.
It doesn't make sense that it runs fine BIAB but not in RB
Pat you probably already know this but ASIO is a one horse operation. Thus if you have BiaB open using ASIO then also open RB with ASIO the driver goes nuts and messes something up. I do not record in BiaB so I use MME in it and ASIO in Sonar and I have absolutely no problems running both at the same time. If you already knew this then sorry about the redundancy.
Principal: Your child always causes trouble in school.
Me: My child causes trouble at home, do I ever call you?
64 bit Win 10 Pro, the latest BiaB/RB, Roland Octa-Capture audio interface, a ton of software/hardware
|
|
|
|
|
|
|
|
|
|
|
|
|
RealBand
|
Joined: Jul 2000
Posts: 3,161
Veteran
|
|
Veteran
Joined: Jul 2000
Posts: 3,161 |
It depends on the ASIO device used. I use a Creative ASIO Driver with which I can actually play BIAB and RB tracks at the same time.
|
|
|
|
|
|
|
|
|
|
|
|
|
RealBand
|
Joined: Oct 2008
Posts: 8,109
Veteran
|
|
OP
Veteran
Joined: Oct 2008
Posts: 8,109 |
I'm like you in yet another way Mario! I don't normally need ASIO in BIAB since I don't record in that environment. I just set it up to use the ASIO driver as "process of elimination" test to see if the ASIO driver failed in every application, or if it only failed in RB.
The ASIO works fine in BIAB. So there must be something different about the way that RB uses it. Still researching and bugging support people at both companies.
Thanks for offering your thoughts! We're on the same page!
|
|
|
|
|
|
|
|
|
|
|
|
|
RealBand
|
Joined: May 2000
Posts: 22,455
Veteran
|
|
Veteran
Joined: May 2000
Posts: 22,455 |
Have you actually changed BiaB to be MME, rebooted and then launched RB and tried ASIO?
Just curious.
ASIO is indeed a one man dog, and some drivers can switch between applications without problem while others don't seem to get properly 'released' for use in another program. I'm wondering if you are opening BiaB (or any audio program) and the drivers don't get properly released for RB. The most basic test is to set everything to MME, reboot (so Windows settings clear) and then try ASIO in RB.
That would determine that the RB/driver combo is an issue ..
or maybe a setting in the Oxygen is itself is errant. You said you changed everything in the computer to be 16 bit .. but if the Oxygen itself is set to be sending 24 bit you may have adjusted everything the wrong way.
.. then comes the 24/44 or 24/48 question .. some devices only support one of these.
Sorry, but lots of testing options came to mind when I read this.
I do not work here, but the benefits are still awesome
Make your sound your own!
|
|
|
|
|
|
|
|
|
|
|
|
|
RealBand
|
Joined: Oct 2008
Posts: 8,109
Veteran
|
|
OP
Veteran
Joined: Oct 2008
Posts: 8,109 |
bob,
Most of the time I only use RB, nothing else. Booting up from scratch I still get problems.
If the oxygen was set to 24, then it would have NEVER worked.. but it does work sometimes. I think the OXYgen had some problems though, and I'm not sure what all it might be affecting. So I took it out of the equations and started using a Focusrite 2i4. It also has problems with ASIO, but not the same ones as the oxygen.
|
|
|
|
|
|
|
|
|
|
|
|
|
RealBand
|
Joined: Jul 2000
Posts: 3,161
Veteran
|
|
Veteran
Joined: Jul 2000
Posts: 3,161 |
I have an Oxygen 49 which I use to enter Midi notes, test chords etc. It comes with a lot of sliders and knobs most of which I do not use.
I have set up the 49 Driver as Input only and get it to work by selecting a specific Midi track with the output to an external Midi Synth (not DXi/VSTi). It is necessary to activate the connection at the start by clicking on the Program Column (in the Classic Tracks Window) and selecting the Patch via the Patch Panel. Once started, you can select different tracks/patches although, if you hear a piano unintentionally selected then repeat the patch setup as above.
It is a pity that changes in the 2015 RB version (accidental I hope) have changed the way in which selecting Midi Patches as above works as more keystrokes are now required.
.
|
|
|
|
|
|
|
|
|
|
|
|
|
RealBand
|
Joined: Oct 2008
Posts: 8,109
Veteran
|
|
OP
Veteran
Joined: Oct 2008
Posts: 8,109 |
I have an Oxygen 49 which I use to enter Midi notes, test chords etc. It comes with a lot of sliders and knobs most of which I do not use.
I have set up the 49 Driver as Input only and get it to work by selecting a specific Midi track with the output to an external Midi Synth (not DXi/VSTi). It is necessary to activate the connection at the start by clicking on the Program Column (in the Classic Tracks Window) and selecting the Patch via the Patch Panel. Once started, you can select different tracks/patches although, if you hear a piano unintentionally selected then repeat the patch setup as above.
It is a pity that changes in the 2015 RB version (accidental I hope) have changed the way in which selecting Midi Patches as above works as more keystrokes are now required.
. I don't understand what you mean here Lyn.. I don't see a change for the worse... in fact I was just thinking yesterday that it seems easier to me now when I have to change MIDI patches. I used to have to alternate between right click and left click, but now left click does it all... they've even set the patches up in multiple ways so you can either enter a patch number, or pick it from a pick list.
|
|
|
|
|
|
|
|
|
|
|
|
Ask sales and support questions about Band-in-a-Box using natural language.
ChatPG's knowledge base includes the full Band-in-a-Box User Manual and sales information from the website.
|
|
|
|
|
|
|
|
|
|
|
Band-in-a-Box 2026 for Windows Special Offers End Tomorrow (January 15th, 2026) at 11:59 PM PST!
Time really is running out! Save up to 50% on Band-in-a-Box® 2026 for Windows® upgrades and receive a FREE Bonus PAK—only when you order by 11:59 PM PST on Thursday, January 15, 2026!
We've added many major new features and new content in a redesigned Band-in-a-Box® 2026 for Windows®!
Version 2026 introduces a modernized GUI redesign across the program, with updated toolbars, refreshed windows, smoother workflows, and a new Dark Mode option. There’s also a new side toolbar for quicker access to commonly used windows, and the new Multi-View feature lets you arrange multiple windows as layered panels without overlap, making it easier to customize your workspace.
Another exciting new addition is the new AI-Notes feature, which can transcribe polyphonic audio into MIDI. You can view the results in notation or play them back as MIDI, and choose whether to process an entire track or focus on specific parts like drums, bass, guitars/piano, or vocals. There's over 100 new features in Band-in-a-Box® 2026 for Windows®.
There's an amazing collection of new content too, including 202 RealTracks, new RealStyles, MIDI SuperTracks, Instrumental Studies, “Songs with Vocals” Artist Performance Sets, Playable RealTracks Set 5, two RealDrums Stems sets, XPro Styles PAK 10, Xtra Styles PAK 21, and much more!
Upgrade your Band-in-a-Box for Windows to save up to 50% on most Band-in-a-Box® 2026 upgrade packages!
Plus, when you order your Band-in-a-Box® 2026 upgrade during our special, you'll receive a Free Bonus PAK of exciting new add-ons.
If you need any help deciding which package is the best option for you, just let us know. We are here to help!
Band-in-a-Box® 2026 for Windows® Special Offers Extended Until January 15, 2026!
Good news! You still have time to upgrade to the latest version of Band-in-a-Box® for Windows® and save. Our Band-in-a-Box® 2026 for Windows® special now runs through January 15, 2025!
We've packed Band-in-a-Box® 2026 with major new features, enhancements, and an incredible lineup of new content! The program now sports a sleek, modern GUI redesign across the entire interface, including updated toolbars, refreshed windows, smoother workflows, a new dark mode option, and more. The brand-new side toolbar provides quicker access to key windows, while the new Multi-View feature lets you arrange multiple windows as layered panels without overlap, creating a flexible, clutter-free workspace. We have an amazing new “AI-Notes” feature. This transcribes polyphonic audio into MIDI so you can view it in notation or play it back as MIDI. You can process an entire track (all pitched instruments and drums) or focus on individual parts like drums, bass, guitars/piano, or vocals. There's an amazing collection of new content too, including 202 RealTracks, new RealStyles, MIDI SuperTracks, Instrumental Studies, “Songs with Vocals” Artist Performance Sets, Playable RealTracks Set 5, two RealDrums Stems sets, XPro Styles PAK 10, Xtra Styles PAK 21, and much more!
There are over 100 new features in Band-in-a-Box® 2026 for Windows®.
When you order purchase Band-in-a-Box® 2026 before 11:59 PM PST on January 15th, you'll also receive a Free Bonus PAK packed with exciting new add-ons.
Upgrade to Band-in-a-Box® 2026 for Windows® today! Check out the Band-in-a-Box® packages page for all the purchase options available.
Happy New Year!
Thank you for being part of the Band-in-a-Box® community.
Wishing you and yours a very happy 2026—Happy New Year from all of us at PG Music!
Season's Greetings!
Wishing everyone a happy, healthy holiday season—thanks for being part of our community!
The office will be closed for Christmas Day, but we will be back on Boxing Day (Dec 26th) at 6:00am PST.
Team PG
Band-in-a-Box 2026 Video: The Newly Designed Piano Roll Window
In this video, we explore the updated Piano Roll, complete with a modernized look and exciting new features. You’ll see new filtering options that make it easy to focus on specific note groups, smoother and more intuitive note entry and editing, and enhanced options for zooming, looping, and more.
Watch the video.
You can see all the 2026 videos on our forum!
Band-in-a-Box 2026 Video: AI Stems & Notes - split polyphonic audio into instruments and transcribe
This video demonstrates how to use the new AI-Notes feature together with the AI-Stems splitter, allowing you to select an audio file and have it separated into individual stems while transcribing each one to its own MIDI track. AI-Notes converts polyphonic audio—either full mixes or individual instruments—into MIDI that you can view in notation or play back instantly.
Watch the video.
You can see all the 2026 videos on our forum!
Bonus PAK and 49-PAK for Band-in-a-Box® 2026 for Windows®
With your version 2026 for Windows Pro, MegaPAK, UltraPAK, UltraPAK+, Audiophile Edition or PlusPAK purchase, we'll include a Bonus PAK full of great new Add-ons for FREE! Or upgrade to the 2026 49-PAK for only $49 to receive even more NEW Add-ons including 20 additional RealTracks!
These PAKs are loaded with additional add-ons to supercharge your Band-in-a-Box®!
This Free Bonus PAK includes:
- The 2026 RealCombos Booster PAK:
-For Pro customers, this includes 27 new RealTracks and 23 new RealStyles.
-For MegaPAK customers, this includes 25 new RealTracks and 23 new RealStyles.
-For UltraPAK customers, this includes 12 new RealStyles.
- MIDI Styles Set 92: Look Ma! More MIDI 15: Latin Jazz
- MIDI SuperTracks Set 46: Piano & Organ
- Instrumental Studies Set 24: Groovin' Blues Soloing
- Artist Performance Set 19: Songs with Vocals 9
- Playable RealTracks Set 5
- RealDrums Stems Set 9: Cool Brushes
- SynthMaster Sounds Set 1 (with audio demos)
- Android Band-in-a-Box® App (included)
Looking for more great add-ons, then upgrade to the 2026 49-PAK for just $49 and you'll get:
- 20 Bonus Unreleased RealTracks and RealDrums with 20 RealStyle.
- FLAC Files (lossless audio files) for the 20 Bonus Unreleased RealTracks and RealDrums
- MIDI Styles Set 93: Look Ma! More MIDI 16: SynthMaster
- MIDI SuperTracks Set 47: More SynthMaster
- Instrumental Studies 25 - Soul Jazz Guitar Soloing
- Artist Performance Set 20: Songs with Vocals 10
- RealDrums Stems Set 10: Groovin' Sticks
- SynthMaster Sounds & Styles Set 2 (sounds & styles with audio demos)
Learn more about the Bonus PAKs for Band-in-a-Box® 2026 for Windows®!
|
|
|
|
|
|
|
|
|
|
|
|
Forums57
Topics85,735
Posts795,447
Members39,941
| |
Most Online25,754
Jan 24th, 2025
|
|
|
|
|
|
|
|
|
Dansk
Deutsch - Windows
Español
Français - Windows
Italiano - Windows
Nederlands
Polski
Português
Svenskt
русский
Japanese
Simplified Chinese
Traditional Chinese
Korean