|
Log in to post
|
Print Thread |
|
|
|
|
|
Off-Topic
|
Joined: Mar 2008
Posts: 62
Enthusiast
|
OP
Enthusiast
Joined: Mar 2008
Posts: 62 |
Here is a recording I did of Love Me Tender. All comments and suggestions are always welcome. Just trying to improve. Love Me Tender Thank Ron
Line 6 Guitar Port Gear Box POD Farm Pedal Steel Guitar My Music
|
|
|
|
|
|
|
|
|
|
|
|
|
Off-Topic
|
Joined: Jan 2007
Posts: 358
Journeyman
|
|
Journeyman
Joined: Jan 2007
Posts: 358 |
Ron
No bad notes but I have two minor comments.
1 perhaps a little vibrato on the sustained notes.
2 The ending needs to be a bit more dynamic.
I am in no position to criticise. Though I play other instruments I have been battling the pedal steel for a couple of years Battling discribes it pretty well I was using an old Shobud but my wife just treated me to a beautiful Carter Magnum. levers & pedals are much easier to work for my tired old leg muscles. Everybody will be pleased to hear that I still don't play well enough to post anything.Keep up the good work..Hank
|
|
|
|
|
|
|
|
|
|
|
|
|
Off-Topic
|
Joined: Mar 2008
Posts: 62
Enthusiast
|
|
OP
Enthusiast
Joined: Mar 2008
Posts: 62 |
Hank,
Thanks for your input, I agree with both.
I'm still playing an old Carter Starter. Looking to get new one.
Maybe a Jackson or Pro Carter.
Regards
Ron
Line 6 Guitar Port Gear Box POD Farm Pedal Steel Guitar My Music
|
|
|
|
|
|
|
|
|
|
|
|
|
Off-Topic
|
Joined: Jan 2007
Posts: 358
Journeyman
|
|
Journeyman
Joined: Jan 2007
Posts: 358 |
Don't know Jackson butI like my Carter
Hank
|
|
|
|
|
|
|
|
|
|
|
|
|
Off-Topic
|
Joined: Mar 2008
Posts: 62
Enthusiast
|
|
OP
Enthusiast
Joined: Mar 2008
Posts: 62 |
Jackson is fairly new. Same people that made the Sho-Bud.
Ron
Line 6 Guitar Port Gear Box POD Farm Pedal Steel Guitar My Music
|
|
|
|
|
|
|
|
|
|
|
|
|
Off-Topic
|
Joined: Dec 2003
Posts: 8,987
Veteran
|
|
Veteran
Joined: Dec 2003
Posts: 8,987 |
ron,
nice job and no count-in clicks. i agree about the ending. maybe try fading it out and see what that sounds like. audacity again.
|
|
|
|
|
|
|
|
|
|
|
|
|
Off-Topic
|
Joined: Mar 2008
Posts: 62
Enthusiast
|
|
OP
Enthusiast
Joined: Mar 2008
Posts: 62 |
Thanks Don,
I'm working on the ending.
Ron
Line 6 Guitar Port Gear Box POD Farm Pedal Steel Guitar My Music
|
|
|
|
|
|
|
|
|
|
|
|
|
Off-Topic
|
Joined: Aug 2003
Posts: 172
Apprentice
|
|
Apprentice
Joined: Aug 2003
Posts: 172 |
I think it sounds great - very cool playing! I just got me a steel this week, so it was nice to hear what can be done. Excellent tone! ...Time to practice 
----- Do you love the Floyd as much as I do? If so, click away the moments that make up the dull day: www.canadianpinkfloyd.com
|
|
|
|
|
|
|
|
|
|
|
|
|
Off-Topic
|
Joined: Mar 2008
Posts: 62
Enthusiast
|
|
OP
Enthusiast
Joined: Mar 2008
Posts: 62 |
Josh,
Thanks a lot.
What did you get?
Ron
Line 6 Guitar Port Gear Box POD Farm Pedal Steel Guitar My Music
|
|
|
|
|
|
|
|
|
|
|
|
|
Off-Topic
|
Joined: Sep 2006
Posts: 809
Expert
|
|
Expert
Joined: Sep 2006
Posts: 809 |
Enjoyed the recording. Very nicely done.
|
|
|
|
|
|
|
|
|
|
|
|
|
Off-Topic
|
Joined: Jun 2000
Posts: 2,217
Veteran
|
|
Veteran
Joined: Jun 2000
Posts: 2,217 |
.
Hi Ron!
Excellent intonation and tone production.
Can you try playing a little more loosely? Most of the melody notes are strictly on the beat, which gets old fast. Try attacking some of the notes a little behind or a little before the beat. Listen to Elvis do it and you will get the idea.
If you loosen up in the first two 4-bar lines, then tighten up on the 3rd 4, then loosen up again for the last 4, it will make a nice contrast. I hear the rhythm section coming in stronger on the 3rd line. A noticeable shift to strict rhythm there, for 4 bars will work nicely. Also use fewer glissandi on the third 4.
Also think about phrasing. When you glide from one note to another, the first is emphasized and the second is rendered less important. Part of the art of phrasing is the art of putting a clean attack on the most "important" notes and saving the slides for the other notes. This is of course a matter of taste and style. Your way of doing this is one of the things that will make your style unique. On this recording I cant avoid the impression that the choices of whether and when to slide or not slide are made randomly, without much consistency or planning. Am I wrong about that?
Phrasing comes with practice. It comes after you know the material well enough to play without thinking about notes, picks, pedals and levers. When it is your unique and beautiful voice coming through the strings you will know it, and you can tell armchair critics like me to take a flying leap.
.
|
|
|
|
|
|
|
|
|
|
|
|
|
Off-Topic
|
Joined: Feb 2005
Posts: 2,646
Veteran
|
|
Veteran
Joined: Feb 2005
Posts: 2,646 |
Nice work. The steel gives it that Hawaiian feel. Keep up the good work! Thanks for sharing! Listen To My MusicRead My BlogMy Web PageReverbnation
My TunesPsalm 57:7 My heart, O God, is steadfast, my heart is steadfast; I will sing and make music.
|
|
|
|
|
|
|
|
|
|
|
|
|
Off-Topic
|
Joined: Mar 2008
Posts: 62
Enthusiast
|
|
OP
Enthusiast
Joined: Mar 2008
Posts: 62 |
Line 6 Guitar Port Gear Box POD Farm Pedal Steel Guitar My Music
|
|
|
|
|
|
|
|
|
|
|
|
|
Off-Topic
|
Joined: May 2000
Posts: 2,704
Veteran
|
|
Veteran
Joined: May 2000
Posts: 2,704 |
Good job, Ron. How long have you been playing psg? Sounds like you've got some hours on it. Carter starter is not bad at all. I have a Mullen I love and an old Carter D10 that sounds great. The Magnum is a great sounding guitar, to hear it at it's best do a search for 'Sarah Jory' .
Howard
|
|
|
|
|
|
|
|
|
|
|
|
|
Off-Topic
|
Joined: Mar 2008
Posts: 62
Enthusiast
|
|
OP
Enthusiast
Joined: Mar 2008
Posts: 62 |
Thanks Howard.
I played some in my early years then got real busy in the business world sold all my equiptment and didn't play anything for about 40 to 45 years. I retired 7 years ago and a couple of years ago bought the Carter Starter then picked up BIAB. I enjoy messing around with it.
I have enjoyed listening to Sarah Jory play. I ran across her vids about a year ago.
Regards,
Ron
Line 6 Guitar Port Gear Box POD Farm Pedal Steel Guitar My Music
|
|
|
|
|
|
|
|
|
|
|
|
|
Off-Topic
|
Joined: Jun 2009
Posts: 484
Journeyman
|
|
Journeyman
Joined: Jun 2009
Posts: 484 |
I know this is off topic, but since we are in an off topic board I figure this would be ok.
I have always enjoyed steel guitar coming from bands like the Doobie Brothers when they had John McFee. As a guitarist who has never been anywhere within a mile of a steel pedal guitar, I would sure appreciate anyone sharing how these things work. I understand you use a metal bar in lieu of fingers. But, how do you rip through the scales with that? Not having access to one nor the cash ($1200 for a Starter Carter) I cannot figure out the logic on my own. I listen to a player like John Mcfee and stand in awe over how they can play that thing.
With the guitar, you are taught you have positions where you can maximize your melodies while minimizing your mobility (running up and down the fretboard). But, how is that accomplished when you pick up the bar and now have taken away the finger play? I realize you can alternate the tuning from standard to make a vertical single fret chord such as in D tuning. Yet, when the player departs from chords and plays melodies I don't have a clue how they do that.
Thanks for taking the time to explain to this finger player.
RickeG
Last edited by RickeG; 07/16/09 11:40 AM.
|
|
|
|
|
|
|
|
|
|
|
|
|
Off-Topic
|
Joined: Jan 2007
Posts: 358
Journeyman
|
|
Journeyman
Joined: Jan 2007
Posts: 358 |
Rick
The pedal steel, as the name implies has three foot pedals activated by the left foot. These lower or raise the pitch of particular strings, much as moving a finger does on the regular guitar. Also four knee levers hang down, one on each side of the knees. Left or right movement again changes the pitch of particular strings.
Hope this helps...Hank
|
|
|
|
|
|
|
|
|
|
|
|
|
Off-Topic
|
Joined: Mar 2008
Posts: 62
Enthusiast
|
|
OP
Enthusiast
Joined: Mar 2008
Posts: 62 |
As Hank was saying you can keep the bar in one position and have access to the scale of say C and it's chords in 5 inversions.
Then by pushing two pedals you have the F scale and chords in three inversions.
You can press one pedal and engage a knee lever for the G Major scale and chords,
Other pedal/Knee lever comb. will get Amin Dmin or Emin
Other combos gives you different dim and aug chords.
There are several other positions on the fret board with other pedal/knee combos that gives you similar results.
You can also get these scales by moving thr bar up and down the fret board.
These examples are for the E9th tuning. There are a whole different set for the C6th tuning.
If you have any other questions fire away and I'll do my best.
Ron
Ron
Line 6 Guitar Port Gear Box POD Farm Pedal Steel Guitar My Music
|
|
|
|
|
|
|
|
|
|
|
|
|
Off-Topic
|
Joined: Jan 2007
Posts: 358
Journeyman
|
|
Journeyman
Joined: Jan 2007
Posts: 358 |
The trick is remembering which pedals to press, which knee lever to activate,which strings to pick, which fret to place your bar at & when! This type of steel guitar is more a country instrument than Hawaiian....Hank
|
|
|
|
|
|
|
|
|
|
|
|
|
Off-Topic
|
Joined: Jun 2009
Posts: 484
Journeyman
|
|
Journeyman
Joined: Jun 2009
Posts: 484 |
Wow, that sounds more complex than the piano! Would the pedals and levers also have a flex to them? For example, if you wanted to move from C Maj to Db Maj. Would you press the lever/pedal just a hair up to increase the string tension?
Or, do the both of pedal and levers act as sort of an On/Off switch?
Rio, if I understand you correctly, the bar hand in its horizontal line can play a C Maj scale? Then, by moving a lever and or pedal it changes the string tension to fit say an F chord/scale? You mentioned a C scale. Is the instrument tuned to a C scale before moving any pedals or levels? In other words, if I were to not lay the bar down on the strings and not touch any of the pedals or levers I should be able to play a C scale like the way I would arpeggiate a chord on a guitar for example?
Next, you mentioned how you mix the use of the pedals and levers. Does one represent flat/sharp while the other represents minor/major?
Lastly, please check my logic here. Beginning with no pedal/lever movement, If the open string is "G". I press down my bar on the the second fret of that string now the note becomes an "A". Next, I move the lever/pedal to the F position. Now, the open string that was formally "G" has now shifted to "Bb". I press my bar down on the second fret and now I have a "C". Is that logic correct?
Sorry to be so inquisitive. Thank you so very much for taking the time to address my questions. I have always had a fascination with this instrument. While not knowing anyone who owned one in addition to the local music stores never having one in stock to toy around with, I have not had anyone to answer my questions. I want to purchase one some day. Before I do, I would like to know if it is something I can navigate. I do play piano, percussion as well as guitar. In addition, I do understand music theory to transpose and navigate around.
Am I getting warmer?
Thanks
RickeG
|
|
|
|
|
|
|
|
|
|
|
|
Ask sales and support questions about Band-in-a-Box using natural language.
ChatPG's knowledge base includes the full Band-in-a-Box User Manual and sales information from the website.
|
|
|
|
|
|
|
|
|
|
|
Band-in-a-Box® 2025 for Mac® users: Build 904 now available!
If you're already using Band-in-a-Box® 2025 for Mac®, make sure to grab the latest update! Build 904 is now available for download and includes the newest additions and enhancements from our team.
Band-in-a-Box® 2026 for Windows® users: Build 1237 is now available!
Already a Band-in-a-Box 2026 for Windows user? Stay up to date and download the build 1237 to get all the latest additions and enhancements.
PowerTracks Pro 2026 for Windows is Here!
PowerTracks 2026 is here—bringing powerful new enhancements designed to make your production workflow faster, smoother, and more intuitive than ever.
The enhanced Mixer now shows Track Type and Instrument icons for instant track recognition, while a new grid option simplifies editing views. Non-floating windows adopt a modern title bar style, replacing the legacy blue bar.
The Master Volume is now applied at the end of the audio chain for consistent levels and full-signal master effects.
Tablature now includes a “Save bends when saving XML” option for improved compatibility with PG Music tools. Plus, you can instantly match all track heights with a simple Ctrl-release after resizing, and Add2 chords from MGU/SGU files are now fully supported... and more!
Get started today—first-time packages start at just $49.
Already using PowerTracks Pro Audio? Upgrade for as little as $29 and enjoy the latest improvements!
Order now!
Band-in-a-Box 2026 for Windows Special Offers End Tomorrow (January 15th, 2026) at 11:59 PM PST!
Time really is running out! Save up to 50% on Band-in-a-Box® 2026 for Windows® upgrades and receive a FREE Bonus PAK—only when you order by 11:59 PM PST on Thursday, January 15, 2026!
We've added many major new features and new content in a redesigned Band-in-a-Box® 2026 for Windows®!
Version 2026 introduces a modernized GUI redesign across the program, with updated toolbars, refreshed windows, smoother workflows, and a new Dark Mode option. There’s also a new side toolbar for quicker access to commonly used windows, and the new Multi-View feature lets you arrange multiple windows as layered panels without overlap, making it easier to customize your workspace.
Another exciting new addition is the new AI-Notes feature, which can transcribe polyphonic audio into MIDI. You can view the results in notation or play them back as MIDI, and choose whether to process an entire track or focus on specific parts like drums, bass, guitars/piano, or vocals. There's over 100 new features in Band-in-a-Box® 2026 for Windows®.
There's an amazing collection of new content too, including 202 RealTracks, new RealStyles, MIDI SuperTracks, Instrumental Studies, “Songs with Vocals” Artist Performance Sets, Playable RealTracks Set 5, two RealDrums Stems sets, XPro Styles PAK 10, Xtra Styles PAK 21, and much more!
Upgrade your Band-in-a-Box for Windows to save up to 50% on most Band-in-a-Box® 2026 upgrade packages!
Plus, when you order your Band-in-a-Box® 2026 upgrade during our special, you'll receive a Free Bonus PAK of exciting new add-ons.
If you need any help deciding which package is the best option for you, just let us know. We are here to help!
Band-in-a-Box® 2026 for Windows® Special Offers Extended Until January 15, 2026!
Good news! You still have time to upgrade to the latest version of Band-in-a-Box® for Windows® and save. Our Band-in-a-Box® 2026 for Windows® special now runs through January 15, 2025!
We've packed Band-in-a-Box® 2026 with major new features, enhancements, and an incredible lineup of new content! The program now sports a sleek, modern GUI redesign across the entire interface, including updated toolbars, refreshed windows, smoother workflows, a new dark mode option, and more. The brand-new side toolbar provides quicker access to key windows, while the new Multi-View feature lets you arrange multiple windows as layered panels without overlap, creating a flexible, clutter-free workspace. We have an amazing new “AI-Notes” feature. This transcribes polyphonic audio into MIDI so you can view it in notation or play it back as MIDI. You can process an entire track (all pitched instruments and drums) or focus on individual parts like drums, bass, guitars/piano, or vocals. There's an amazing collection of new content too, including 202 RealTracks, new RealStyles, MIDI SuperTracks, Instrumental Studies, “Songs with Vocals” Artist Performance Sets, Playable RealTracks Set 5, two RealDrums Stems sets, XPro Styles PAK 10, Xtra Styles PAK 21, and much more!
There are over 100 new features in Band-in-a-Box® 2026 for Windows®.
When you order purchase Band-in-a-Box® 2026 before 11:59 PM PST on January 15th, you'll also receive a Free Bonus PAK packed with exciting new add-ons.
Upgrade to Band-in-a-Box® 2026 for Windows® today! Check out the Band-in-a-Box® packages page for all the purchase options available.
Happy New Year!
Thank you for being part of the Band-in-a-Box® community.
Wishing you and yours a very happy 2026—Happy New Year from all of us at PG Music!
Season's Greetings!
Wishing everyone a happy, healthy holiday season—thanks for being part of our community!
The office will be closed for Christmas Day, but we will be back on Boxing Day (Dec 26th) at 6:00am PST.
Team PG
|
|
|
|
|
|
|
|
|
|
|
|
Forums57
Topics86,048
Posts799,353
Members40,017
| |
Most Online44,367
Mar 4th, 2026
|
|
|
|
|
|
|
|
|
Dansk
Deutsch - Windows
Español
Français - Windows
Italiano - Windows
Nederlands
Polski
Português
Svenskt
русский
Japanese
Simplified Chinese
Traditional Chinese
Korean