If you need to change drivers to hear it, you need to visit the same Audio Settings area and click the Drivers button, then look at your available Driver options.

You may need to click the 'Move selected driver to the top' to make it the default.
Also normally you will only want one driver for In and Out highlighted. Unless you do multitrack recording using an input device that handles multiple tracks (recording 4 or 8 tracks at a time).

Make sure the audio driver you want is highlighted and moved to top ..

As far as hearing the music while recording; what MIDI synth device are you using?
Is 'Use default Synth' checked in the options?
These are important settings to get correct before messing with the 'Latency Adjust' tool.
In RB you can try clicking 'Prefs-Audio Settings-Latency Adjust button' if audio is still out of time with MIDI.

As for 'Can I mix this? :
In BB you can mix the vocal with the rest of the tune using the mixer at upper right (in recent versions). You only get one audio track and it gets saved to same folder as the song but named with the .wav extension. So it would be songname.wav
This gets opened and imported into a BB song if it exists.

In RB, each track is saved as part of the project and you get many more audio tracks to work with. If you have a BB song using 8 tracks already, RB offers 40 more tracks. Open the BB song in RB and you'll have 40 more tracks to use for either more MIDI or more Audio.

You may want to check the page below or youtube for tutorials
http://www.pgmusic.com/howtos.htm
Of Note are the two tutorials below
Band-in-a-Box for Windows - No Sound / MIDI Driver Setup
Realband - No Sound / MIDI Driver Setup

Last edited by rharv; 04/17/15 12:08 PM.
I do not work here, but the benefits are still awesome
Make your sound your own!