|
Log in to post
|
Print Thread |
|
|
|
|
|
Recording, Mixing, Performance and Production
|
Joined: Jan 2006
Posts: 604
Journeyman
|
OP
Journeyman
Joined: Jan 2006
Posts: 604 |
After I have installed win 10 my M-audio 410 sound module is set up giving delay after new boot?
|
|
|
|
|
|
|
|
|
|
|
|
|
Recording, Mixing, Performance and Production
|
Joined: Dec 2000
Posts: 12,834
Veteran
|
|
Veteran
Joined: Dec 2000
Posts: 12,834 |
Is that a Firewire device? From what I can tell, since the FW410 is discontinued, it is not fully supported for use on Windows 10. It may or may not work, and as you can see by the link, it is recommended to install the latest driver.
John Laptop-HP Omen I7 Win11Pro 32GB 12TB SSD Desktop-ASUS-I7 Win10Pro 32GB 12TB SATA BB2026/UMC204HD&404HD/Casios/Cakewalk/Reaper/Studio One/Notion/Dorico/Noteworthy/NI/Halion/IK http://www.sus4chord.com (under rehosting/construction)
|
|
|
|
|
|
|
|
|
|
|
|
|
Recording, Mixing, Performance and Production
|
Joined: Jan 2006
Posts: 604
Journeyman
|
|
OP
Journeyman
Joined: Jan 2006
Posts: 604 |
It's a firewire device, and it's working ok, but is sometimes setup wrong after boot up ??
I think it's time to follow your advice, but which module should I choose?
(I'm still working on Train to Omaha and it may take a long while, I'll try not to forget you John :-)
Strat
|
|
|
|
|
|
|
|
|
|
|
|
|
Recording, Mixing, Performance and Production
|
Joined: Dec 2000
Posts: 12,834
Veteran
|
|
Veteran
Joined: Dec 2000
Posts: 12,834 |
Lots of folks on the forum here seem to like the FocusRite line of audio devices.
I like my M-Audio FastTrackPro, but it's dated now. And Avid sold off the M-Audio line, so it's not exactly what it was (perhaps even better, but others would have to comment).
John Laptop-HP Omen I7 Win11Pro 32GB 12TB SSD Desktop-ASUS-I7 Win10Pro 32GB 12TB SATA BB2026/UMC204HD&404HD/Casios/Cakewalk/Reaper/Studio One/Notion/Dorico/Noteworthy/NI/Halion/IK http://www.sus4chord.com (under rehosting/construction)
|
|
|
|
|
|
|
|
|
|
|
|
|
Recording, Mixing, Performance and Production
|
Joined: Dec 2003
Posts: 24,481
Veteran
|
|
Veteran
Joined: Dec 2003
Posts: 24,481 |
Strat, I have read that some people had to reinstall drivers to get soundcard and audio input devices to work. Have you tried that?
The bumper sticker said "I'm a veterinarian, therefore I can drive like an animal".
Suddenly I realized how many proctologists are on the road.
64 bit Win 10 Pro, the latest BiaB/RB, Roland Octa-Capture audio interface, a ton of software/hardware
|
|
|
|
|
|
|
|
|
|
|
|
|
Recording, Mixing, Performance and Production
|
Joined: Dec 2012
Posts: 110
Apprentice
|
|
Apprentice
Joined: Dec 2012
Posts: 110 |
I'm using a Presonus Audiobox USB interface and have had no issues upgrading to Win10. It also comes with Studio One Artist DAW which I think is pretty darn good. Not sure of your setup, so it may or may not have as many inputs as you need.
Rich
Windows 10, 64 bit | BIAB 2019 PlusPak | Studio One 2 Artist
|
|
|
|
|
|
|
|
|
|
|
|
|
Recording, Mixing, Performance and Production
|
Joined: Jul 2000
Posts: 27,500
Veteran
|
|
Veteran
Joined: Jul 2000
Posts: 27,500 |
One issue with FireWire devices is that Windows 8 and 10 dropped support for FireWire. Some devices require finding what is known as the "legacy FireWire driver" from Windows 7, installing and selecting it.
Even then, the handwriting is on the wall for the limited future of the FireWire standard.
I'm one of those on the forum using Focusrite Scarlett USB interfaces with good results on Windows 10.
BIAB 2025 Win Audiophile. Software: Studio One 7 Pro, Swam horns, Acoustica-7, Notion 6, Song Master Pro, Win 11 Home. Hardware: Intel i9, 32 Gb; Presonus 192 & Faderport 8, Royer 121, Slate VSX, Adam Sub8 & Neumann 120 monitors.
|
|
|
|
|
|
|
|
|
|
|
|
|
Recording, Mixing, Performance and Production
|
Joined: Dec 2006
Posts: 1,590
Expert
|
|
Expert
Joined: Dec 2006
Posts: 1,590 |
Check out the Zoom gear. I use the UAC-2 USB3 interface and love it. They have other interfaces and some wild looking 8 separate input versions. Too expensive for me. Mine's only 2 input! It works a treat with Windows 10 though I had a couple of minor hiccups early on and had to re-install it. The loop back feature is useful for things like streetjelly.
Windows 10 Home 20H2 Build 19042.487
BIAB 2021 (Build 818)
Intel(R) Core(TM), i3-4160, CPU @3.60 GHz RAM 16 GB, 64 Bit X64-based processor
Zoom UAC-2 (USB 3 interface-built in midi)
VoiceLive 3 Extreme, Sputnik Valve Condenser Mic
|
|
|
|
|
|
|
|
|
|
|
|
|
Recording, Mixing, Performance and Production
|
Joined: Jul 2007
Posts: 1,869
Expert
|
|
Expert
Joined: Jul 2007
Posts: 1,869 |
I went back to wIN 7 after toying with WIN 10. My system used a focusrite firewire device and it all worked as intended. So, all hope is not lost. I did not have to tweak, it just happened. I installed over win 7.
Z
Win 11 64, Asus Rog Strix z390 mobo, 64 gig RAM, 8700k
|
|
|
|
|
|
|
|
|
|
|
|
|
Recording, Mixing, Performance and Production
|
|
eddie1261
Unregistered
|
|
eddie1261
Unregistered
|
One issue with FireWire devices is that Windows 8 and 10 dropped support for FireWire. Yet another reason why I will avoid 10 as long as I can. My mixer that the drums run through is connected via Firewire. My studio PC will stay on XP probably forever.
|
|
|
|
|
|
|
|
|
|
|
|
|
Recording, Mixing, Performance and Production
|
Joined: Dec 2013
Posts: 2,732
Veteran
|
|
Veteran
Joined: Dec 2013
Posts: 2,732 |
I'll second that Focusrite USB products work well on Win10.
 Steve BIAB/RB 2022, Pro Tools 2020, Korg N5, JBL LSR 4328 Powered Monitors, AKG/Shure Mics.
PC: Win11 PRO, 4 TB M2 SSD, 2 TB HD, 128 GB Memory
|
|
|
|
|
|
|
|
|
|
|
|
|
Recording, Mixing, Performance and Production
|
Joined: Jan 2006
Posts: 604
Journeyman
|
|
OP
Journeyman
Joined: Jan 2006
Posts: 604 |
I have just bought focusrite Scarlett 2i2, it has the inputs I need and I was promised that I could return it if it didn't work with win 10. All seems to work fine and it is really low noise.
Strat
|
|
|
|
|
|
|
|
|
|
|
|
|
Recording, Mixing, Performance and Production
|
Joined: Dec 2013
Posts: 2,732
Veteran
|
|
Veteran
Joined: Dec 2013
Posts: 2,732 |
Nice Strat. I don't think you'll be disappointed. I even upgraded to one with more ins/outs after I had the starter model.
Steve BIAB/RB 2022, Pro Tools 2020, Korg N5, JBL LSR 4328 Powered Monitors, AKG/Shure Mics.
PC: Win11 PRO, 4 TB M2 SSD, 2 TB HD, 128 GB Memory
|
|
|
|
|
|
|
|
|
|
|
|
|
Recording, Mixing, Performance and Production
|
Joined: Jan 2006
Posts: 604
Journeyman
|
|
OP
Journeyman
Joined: Jan 2006
Posts: 604 |
We have an old saying "the trees don't grow into the heavens". The focusrite works great but sometimes, every now and then, I have to reboot my pc to avoid the audio from youtube to misbehave. If I reboot everything works fine, how come??
Strat
|
|
|
|
|
|
|
|
|
|
|
|
|
Recording, Mixing, Performance and Production
|
Joined: Dec 2013
Posts: 2,732
Veteran
|
|
Veteran
Joined: Dec 2013
Posts: 2,732 |
The focusrite works great but sometimes, every now and then, I have to reboot my pc to avoid the audio from youtube to misbehave. If I reboot everything works fine, how come?? That could be any of several issues. If you have your Focusrite Scarlett Mix Control window up, watch the sampling rate when you hit you tube. I do all of my recording at 96kHz but when I hit the web, sites like you tube will cause the mixer to switch back to 44.1kHz. This usually causes an audio click when it is switching over. I make sure never to have any web browsers open during recording.  Also, if you have BIAB/RB/any DAW open with a 96kHz file, you tube may not run correctly. To resolve that, close your music programs and try you tube again. Audio apps will lock the sampling rate in until they are closed. So watch the mixer when opening you tube to see what's up.
Steve BIAB/RB 2022, Pro Tools 2020, Korg N5, JBL LSR 4328 Powered Monitors, AKG/Shure Mics.
PC: Win11 PRO, 4 TB M2 SSD, 2 TB HD, 128 GB Memory
|
|
|
|
|
|
|
|
|
|
|
|
|
Recording, Mixing, Performance and Production
|
Joined: Jan 2006
Posts: 604
Journeyman
|
|
OP
Journeyman
Joined: Jan 2006
Posts: 604 |
Thanks where do I find the mix control window ?
Strat
|
|
|
|
|
|
|
|
|
|
|
|
|
Recording, Mixing, Performance and Production
|
Joined: Dec 2013
Posts: 2,732
Veteran
|
|
Veteran
Joined: Dec 2013
Posts: 2,732 |
It's the mixer screen software that comes with the Scarlett interfaces. Did you install that software or just the drivers?
Steve BIAB/RB 2022, Pro Tools 2020, Korg N5, JBL LSR 4328 Powered Monitors, AKG/Shure Mics.
PC: Win11 PRO, 4 TB M2 SSD, 2 TB HD, 128 GB Memory
|
|
|
|
|
|
|
|
|
|
|
|
|
Recording, Mixing, Performance and Production
|
Joined: Jan 2006
Posts: 604
Journeyman
|
|
OP
Journeyman
Joined: Jan 2006
Posts: 604 |
I installed the downloads I found on the website, no physical discs were enclosed!
As of win 10 problems I can say that I have to boot up my PC twice to avoid my audio to severely distort,
everytime I boot up my PC I have to boot up once more to avoid audio distortion?
Strat
|
|
|
|
|
|
|
|
|
|
|
|
|
Recording, Mixing, Performance and Production
|
Joined: Jul 2000
Posts: 27,500
Veteran
|
|
Veteran
Joined: Jul 2000
Posts: 27,500 |
I have several Windows 10 PCs each with a Focusrite Scarlett (different models). I followed the instructions to download and install Windows 10 beta drivers but experienced some pops/crackles. Focusrite support directed me to roll back to version 1.8, which fixed the problems.
Note that I never experienced "distortion" and if that's what you have, my suggestion is to 1) verify bit and sample rates and 2) verify what device is controlling the clock timing. In the Focusrite MixControl software, you can set the timing to Internal or to another digital device (if you have one, such as something connected to the Scarlett SP/DIF port.
BIAB 2025 Win Audiophile. Software: Studio One 7 Pro, Swam horns, Acoustica-7, Notion 6, Song Master Pro, Win 11 Home. Hardware: Intel i9, 32 Gb; Presonus 192 & Faderport 8, Royer 121, Slate VSX, Adam Sub8 & Neumann 120 monitors.
|
|
|
|
|
|
|
|
|
|
|
|
|
Recording, Mixing, Performance and Production
|
Joined: Dec 2002
Posts: 12,890
Veteran
|
|
Veteran
Joined: Dec 2002
Posts: 12,890 |
Motu reporting compatibility with Win 10 http://www.motu.com/newsitems/motu-and-windows-10/But don't have the nerve to try..... hate to fix something which is not broke.
BIAB – 2026, Reaper (current), i7-12700F Processor, 32GB DDR4-3200MHz RAM, Motu Audio Express 6x6 - My SoundCloud.
|
|
|
|
|
|
|
|
|
|
|
|
|
Recording, Mixing, Performance and Production
|
Joined: Dec 2011
Posts: 2,491
Veteran
|
|
Veteran
Joined: Dec 2011
Posts: 2,491 |
I'm right there with you Dan. Statements like: "appear to be compatible with Windows 10" scare me off.
Jeff
Win11, Intel i7 7700K 4.2Ghz, 32Gb RAM, 2x1Tb HD, 500Gb NVMe, BIAB/RB 2026, MOTU 828MK3 audio, MOTU Midi Express, Yamaha Montage 7, DX7II, TX802, Motif XS Rack, Roland Fantom XR Rack, Oberheim Matrix 1000, VoiceLive3 Extreme, Kontakt 6, SampleTank 4.3
|
|
|
|
|
|
|
|
|
|
|
|
Ask sales and support questions about Band-in-a-Box using natural language.
ChatPG's knowledge base includes the full Band-in-a-Box User Manual and sales information from the website.
|
|
|
|
|
|
|
|
|
|
|
PowerTracks Pro 2026 for Windows is Here!
PowerTracks 2026 is here—bringing powerful new enhancements designed to make your production workflow faster, smoother, and more intuitive than ever.
The enhanced Mixer now shows Track Type and Instrument icons for instant track recognition, while a new grid option simplifies editing views. Non-floating windows adopt a modern title bar style, replacing the legacy blue bar.
The Master Volume is now applied at the end of the audio chain for consistent levels and full-signal master effects.
Tablature now includes a “Save bends when saving XML” option for improved compatibility with PG Music tools. Plus, you can instantly match all track heights with a simple Ctrl-release after resizing, and Add2 chords from MGU/SGU files are now fully supported... and more!
Get started today—first-time packages start at just $49.
Already using PowerTracks Pro Audio? Upgrade for as little as $29 and enjoy the latest improvements!
Order now!
Band-in-a-Box 2026 for Windows Special Offers End Tomorrow (January 15th, 2026) at 11:59 PM PST!
Time really is running out! Save up to 50% on Band-in-a-Box® 2026 for Windows® upgrades and receive a FREE Bonus PAK—only when you order by 11:59 PM PST on Thursday, January 15, 2026!
We've added many major new features and new content in a redesigned Band-in-a-Box® 2026 for Windows®!
Version 2026 introduces a modernized GUI redesign across the program, with updated toolbars, refreshed windows, smoother workflows, and a new Dark Mode option. There’s also a new side toolbar for quicker access to commonly used windows, and the new Multi-View feature lets you arrange multiple windows as layered panels without overlap, making it easier to customize your workspace.
Another exciting new addition is the new AI-Notes feature, which can transcribe polyphonic audio into MIDI. You can view the results in notation or play them back as MIDI, and choose whether to process an entire track or focus on specific parts like drums, bass, guitars/piano, or vocals. There's over 100 new features in Band-in-a-Box® 2026 for Windows®.
There's an amazing collection of new content too, including 202 RealTracks, new RealStyles, MIDI SuperTracks, Instrumental Studies, “Songs with Vocals” Artist Performance Sets, Playable RealTracks Set 5, two RealDrums Stems sets, XPro Styles PAK 10, Xtra Styles PAK 21, and much more!
Upgrade your Band-in-a-Box for Windows to save up to 50% on most Band-in-a-Box® 2026 upgrade packages!
Plus, when you order your Band-in-a-Box® 2026 upgrade during our special, you'll receive a Free Bonus PAK of exciting new add-ons.
If you need any help deciding which package is the best option for you, just let us know. We are here to help!
Band-in-a-Box® 2026 for Windows® Special Offers Extended Until January 15, 2026!
Good news! You still have time to upgrade to the latest version of Band-in-a-Box® for Windows® and save. Our Band-in-a-Box® 2026 for Windows® special now runs through January 15, 2025!
We've packed Band-in-a-Box® 2026 with major new features, enhancements, and an incredible lineup of new content! The program now sports a sleek, modern GUI redesign across the entire interface, including updated toolbars, refreshed windows, smoother workflows, a new dark mode option, and more. The brand-new side toolbar provides quicker access to key windows, while the new Multi-View feature lets you arrange multiple windows as layered panels without overlap, creating a flexible, clutter-free workspace. We have an amazing new “AI-Notes” feature. This transcribes polyphonic audio into MIDI so you can view it in notation or play it back as MIDI. You can process an entire track (all pitched instruments and drums) or focus on individual parts like drums, bass, guitars/piano, or vocals. There's an amazing collection of new content too, including 202 RealTracks, new RealStyles, MIDI SuperTracks, Instrumental Studies, “Songs with Vocals” Artist Performance Sets, Playable RealTracks Set 5, two RealDrums Stems sets, XPro Styles PAK 10, Xtra Styles PAK 21, and much more!
There are over 100 new features in Band-in-a-Box® 2026 for Windows®.
When you order purchase Band-in-a-Box® 2026 before 11:59 PM PST on January 15th, you'll also receive a Free Bonus PAK packed with exciting new add-ons.
Upgrade to Band-in-a-Box® 2026 for Windows® today! Check out the Band-in-a-Box® packages page for all the purchase options available.
Happy New Year!
Thank you for being part of the Band-in-a-Box® community.
Wishing you and yours a very happy 2026—Happy New Year from all of us at PG Music!
Season's Greetings!
Wishing everyone a happy, healthy holiday season—thanks for being part of our community!
The office will be closed for Christmas Day, but we will be back on Boxing Day (Dec 26th) at 6:00am PST.
Team PG
Band-in-a-Box 2026 Video: The Newly Designed Piano Roll Window
In this video, we explore the updated Piano Roll, complete with a modernized look and exciting new features. You’ll see new filtering options that make it easy to focus on specific note groups, smoother and more intuitive note entry and editing, and enhanced options for zooming, looping, and more.
Watch the video.
You can see all the 2026 videos on our forum!
Band-in-a-Box 2026 Video: AI Stems & Notes - split polyphonic audio into instruments and transcribe
This video demonstrates how to use the new AI-Notes feature together with the AI-Stems splitter, allowing you to select an audio file and have it separated into individual stems while transcribing each one to its own MIDI track. AI-Notes converts polyphonic audio—either full mixes or individual instruments—into MIDI that you can view in notation or play back instantly.
Watch the video.
You can see all the 2026 videos on our forum!
|
|
|
|
|
|
|
|
|
|
|
|
Forums57
Topics85,999
Posts798,810
Members40,008
| |
Most Online44,367
Mar 4th, 2026
|
|
|
|
|
|
|
|
|
Dansk
Deutsch - Windows
Español
Français - Windows
Italiano - Windows
Nederlands
Polski
Português
Svenskt
русский
Japanese
Simplified Chinese
Traditional Chinese
Korean