An update. The biggest changes are moving out of the corner and centering on that wall, and placing the monitors so as to create a nearly equilateral triangle with my listening position. I can't move any farther away from the wall, but I am fairly balanced within the room now.
I did add a couple of hardware units, a Golden Age Pre-73 MKII pre-amp and an FMR Audio RNC 1773. Oh, and I trimmed those noise-cancelling hot-pads so they would actually fit into the ports on those monitors:)
I now have a small switch box so I can kill the output to the monitors easily, without having to reach in back for their power buttons. And, I picked up a splitter so I can use either set of headphones without having to plug in or unplug any cables, and there's extra jacks so that I can plug in an in-ear monitor for a Street Jelly show if broadcast from this room.
Those monitor stands are from ISO Acoustics, and they're on top of some Auralex foam pads with a 3/16 piece of plywood in between for stability. The foam helped a lot. That external hdd is setting on the leftover Auralex pads that were in the box. This untreated room is boomy already and so I've tried to limit the noise coming from that hdd and from those monitors setting on the surface of the desk.
I do check my mixes with those monitors as compared to a professional reference mix, but I primarily use headphones.
Looks great Scott! Nice on the equilateral triangle set up. A definite must. I see the speaker stands to get you speakers up to ear height. I made some home made wood stands on mine.
Main difference on my set up from the picture above is that I got some Dell 19" flat screen monitors to match up to the 24" center monitor that was already there. The old CRT screens are gone.
P.S. - The wife got me some blue LEDs for my ceiling as an Xmas gift. They're a lot like the black lights of the past. This is almost as good as lava lamps!
I'd post a picture of my studio now, but nothing much has changed except perhaps a bit more dust on the shelves.
And... BTW Steve....
Quote:
- The wife got me some blue LEDs for my ceiling as an Xmas gift. They're a lot like the black lights of the past. This is almost as good as lava lamps!
The LED's are cool but they ain't lava lamp cool.
You can find my music at: www.herbhartley.com Add nothing that adds nothing to the music. You can make excuses or you can make progress but not both.
The magic you are looking for is in the work you are avoiding.
This is where I compose and arrange. The instruments and recording equipment are in another room, connected by wiring and by V-Control Pro to this PC. The display swivels out of the way of the Mackie monitor.
BIAB 2025 Win Audiophile. Software: Studio One 7 Pro, Swam horns, Acoustica-7, Notion 6, Song Master Pro, Win 11 Home. Hardware: Intel i9, 32 Gb; Roland Integra-7, Presonus 192 & Faderport 8, Royer 121, Adam Sub8 & Neumann 120 monitors.
Thanks Jim. Yes, it is peaceful but not as much as a lesser setup in the Adirondacks. I use headphones to check each mix, particularly the stereo separation and to prevent cancellation in mono. You can see my headphones in the lower left. These are Alessandro brand, a customization of the Grado open air line. Best $100 I ever spent in audio.
I also use headphones when my wife is asleep in the next room! That's when I use the Sony closed cans.
BIAB 2025 Win Audiophile. Software: Studio One 7 Pro, Swam horns, Acoustica-7, Notion 6, Song Master Pro, Win 11 Home. Hardware: Intel i9, 32 Gb; Roland Integra-7, Presonus 192 & Faderport 8, Royer 121, Adam Sub8 & Neumann 120 monitors.
"BIAB 2016 for Windows Audiophile, SONAR Platinum, Adobe Audition, Ozone, & Encore all running on Windows 10 64-bit. Hardware includes a Roland Integra-7, Focusrite 18i20, TCE Finalizer, Behringer X-Touch"
Very nice and comfortable setup.
What is your routing for the Integra-7? I had a Focusrite 18i20 for a while but did not keep it. I currently have Presonus 22vsl and 44vsl for audio interfaces. I also have a Behringer 24 channel mixer w/ stereo USB in/out available. I usually transfer BIAB tracks to a Tascam DP-24 for vocal recording and most mixing.
I'm thinking I can take the Integra-7's 8 analog outputs into my Tascam DP-24's 8 analog inputs and then import realtracks through the Tascam USB interface. Just wondering if you were using the analog outputs of the 18i20 in a similar fashion?
Charlie, it always comes back to signal flow, doesn't it.
My Integra-7 connection to the Focusrite Scarlett 18i20 couldn't be easier: one digital coax cable from the coax out to the SP/DIF In on the Scarlett.
Years ago I tested my Roland Fantom XR, very similar to the better Integra, comparing digital versus analog connections. I preferred the digital sound and the "no fuss" approach so it's been that way ever since.
Another way to say this is that I only use the Integra for MIDI sounds, not for audio or as a mixer or speaker control; I do those functions elsewhere.
BIAB 2025 Win Audiophile. Software: Studio One 7 Pro, Swam horns, Acoustica-7, Notion 6, Song Master Pro, Win 11 Home. Hardware: Intel i9, 32 Gb; Roland Integra-7, Presonus 192 & Faderport 8, Royer 121, Adam Sub8 & Neumann 120 monitors.
Band-in-a-Box® 2025 pour Windows est disponible en Français.
Le téléchargement se fait à partir du site PG Music
Pour ceux qui auraient déjà acheté la version 2025 de Band-in-a-Box (et qui donc ont une version anglaise), il est possible de "franciser" cette version avec les patchs suivants:
Band-in-a-Box 2025 für Windows Deutsch ist verfügbar!
Die deutsche Version Band-in-a-Box® 2025 für Windows ist ab sofort verfügbar!
Alle die bereits die englische Version von Band-in-a-Box und RealBand 2024 installiert haben, finden hier die Installationsdateien für das Sprachenupdate:
Update Your Band-in-a-Box® 2025 to Build 1128 for Windows Today!
Already using Band-in-a-Box 2025 for Windows®? Download Build 1128 now from our Support Page to enjoy the latest enhancements and improvements from our team.
Already using RealBand® 2025 for Windows®? Download Build 5 now from our Support Page to ensure you have the latest enhancements and improvements from our team.
PowerTracks Pro Audio 2025 is here! This new version introduces many features, including VST3 support, the ability to load or import a .FLAC file, a reset option for track height in the Tracks window, a taller Timeline on the Notation window toolbar, new freeze buttons in the Tracks window, three toolbar modes (two rows, single row, and none), the improved Select Patch dialog with text-based search and numeric patch display, a new button in the DirectX/VST window to copy an effects group, and more!
First-time packages start at only $49. Already a PowerTracks Pro Audio user? Upgrade for as little as $29!
Video: Summary of the New Band-in-a-Box® App for iOS®
Join Tobin as he takes you on a tour of the new Band-in-a-Box® app for iOS®! Designed for musicians, singer-songwriters, and educators, this powerful tool lets you create, play, and transfer songs effortlessly on your iPhone® or iPad®—anytime, anywhere.
One of our representatives will be happy to help you over the phone. Our hours of operation are from
6:00AM to 6:00PM PST (GMT -8) Monday thru Friday, and 8:00AM to 4:00PM PST Saturday. We are closed Sunday. You can also send us your questions via email.
One of our representatives will be happy to help you on our Live Chat or by email. Our hours of operation are from
6:00AM to 6:00PM PST (GMT -8) Monday thru Friday; 8:00AM to 4:00PM PST (GMT -8) Saturday; Closed Sunday.
Dansk
Deutsch - Windows
Español
Français - Windows
Italiano - Windows
Nederlands
Polski
Português
Svenskt
русский
Japanese
Simplified Chinese
Traditional Chinese
Korean