Originally Posted By: Don Gaynor

Nice frequency response, if relatively flat (+/- 10%) however, my room configuration demands 9' cable, absolute minimum. I don't like extension cables. They tend to pull apart or add more problems, in my experience. K.I.S.S.. You'd wonder how I accomplish anything under these space constraints. lol

Thanks for jumping in though.

Don

PS: Those that don't give a freq response, I dismiss out of hand.


Don, don't worry about extension cables. I have using this technique for years now:

1-loosely put a zip tie (#1) around the headphone cable
2-loosely put a zip tie (#2) around the extension cable
3-loosely put a zip tie (#3) into the zip ties #1 & #2 loops
4-securly tighten zip ties #1 & #2 onto the cables
5- tighten zip tie #3

I know that you will have to have someone do this for you but your cables will not come unplugged if someone trips on them.

I hope this helps good buddy.


Life is short so make sure you spend as much time as possible on the Internet arguing with strangers.

64 bit Win 10 Pro, the latest BiaB/RB, Roland Octa-Capture audio interface, a ton of software/hardware