|
Log in to post
|
Print Thread |
|
|
|
|
|
Recording, Mixing, Performance and Production
|
Joined: Apr 2013
Posts: 8,847
Veteran
|
Veteran
Joined: Apr 2013
Posts: 8,847 |
I use Audacity as a final step even after a Pro Tools mix. I snip the head and tail and adjust the level using the amplify effect, don't forget to check the box to allow clipping, you won't hear distortion. Will, try this tip to finalize your tracks in Audacity. Before you trim the beginning, create a slight FADE In from the effects menu. Repeat on the ending if you are using a fade out.. FADE OUT from the effects menu. This prevents that abrupt jolt from where you go from the silent lead-in into a high volume beginning. The fade-in can be adjusted before trimming so the fade-in is precise enough you still get the feel of a high volume start but not to the point it jolts you out of your seat. Trim the beginning and end as you normally do. Select ALL Effects Menu - select COMPRESSOR Compress the track but carefully so as to not have any clipping. I normally use 1:5:1 Effects Menu: Select NORMALIZE and normalize the entire song. I normalize to -1db. Using Audacity, these processes in this order provides all my songs to be consistent with a near equal level when played in a playlist. I get a much better balance to each song because the compressor brings up the overall volume level while lowering the peaks. Amplify just brings everything up.. The normalize after compression usually lowers the track level rather than bringing it up and then balances each song to a consistent level between the other songs on the playlist. I've found this method effective even on commercially compressed, peaked and limited songs, using slight compression to bring up the overall levels and normalizing down gives me a clear, consistent output without artifacts.
Last edited by Charlie Fogle; 02/28/16 04:06 AM.
BIAB 2025:RB 2025, Latest builds: Dell Optiplex 7040 Desktop; Windows-10-64 bit, Intel Core i7-6700 3.4GHz CPU and 16 GB Ram Memory.
|
|
|
|
|
|
|
|
|
|
|
|
|
Recording, Mixing, Performance and Production
|
Joined: Aug 2011
Posts: 289
Apprentice
|
|
Apprentice
Joined: Aug 2011
Posts: 289 |
I just tried this on a track I was finding troublesome to master in my DAW (Plugins were making it muddy).
This worked a treat! Thanks for the tip Charlie.
I sometimes forget the golden rule of mastering - light touch required at all times.
Cheers.
Mike.
|
|
|
|
|
|
|
|
|
|
|
|
|
Recording, Mixing, Performance and Production
|
Joined: Apr 2013
Posts: 8,847
Veteran
|
|
Veteran
Joined: Apr 2013
Posts: 8,847 |
I'm glad it worked for you. Audacity is a very useful program.
BIAB 2025:RB 2025, Latest builds: Dell Optiplex 7040 Desktop; Windows-10-64 bit, Intel Core i7-6700 3.4GHz CPU and 16 GB Ram Memory.
|
|
|
|
|
|
|
|
|
|
|
|
|
Recording, Mixing, Performance and Production
|
Joined: Apr 2009
Posts: 10,793
Veteran
|
|
Veteran
Joined: Apr 2009
Posts: 10,793 |
I never use any sort of a fade up at the beginnings to the songs. If it hits too hard, you should go back and fix it in the tracks, not there in the finalizing stages.
No matter how it starts, it should always sound like a normal start. You can hit hard and go from there.
What I would consider doing on a song that does hit the ground running.... rather than simply starting it cold..... insert a nice snare smack on "4" and it will work better and sound more natural.
You can find my music at: www.herbhartley.comAdd nothing that adds nothing to the music. You can make excuses or you can make progress but not both. The magic you are looking for is in the work you are avoiding.
|
|
|
|
|
|
|
|
|
|
|
|
|
Recording, Mixing, Performance and Production
|
Joined: Apr 2013
Posts: 8,847
Veteran
|
|
Veteran
Joined: Apr 2013
Posts: 8,847 |
I never use any sort of a fade up at the beginnings to the songs. If it hits too hard, you should go back and fix it in the tracks, not there in the finalizing stages.
No matter how it starts, it should always sound like a normal start. You can hit hard and go from there.
What I would consider doing on a song that does hit the ground running.... rather than simply starting it cold..... insert a nice snare smack on "4" and it will work better and sound more natural. I agree with you 100% in the context that if something is 'wrong' with the mix, the final mix stage or mastering stage is not the place to 'fix' it. Go back to tracking and fix it there. That is not what I'm addressing. I'm talking about a mix where there is nothing 'wrong'. I'm polishing a song so the dynamics are how I want the song to sound. The fade in is a tweak to soften the intro. In Audacity, the length of the area selection effects how much or how little the track is changed. I work on the selected area's length until I do not hear a fade in of the beginning of the song but the harshness of the abrupt start is diminished to my satisfaction. You have to A/B between the effect and no effect to have a perception of it even being used. Very much like a slight EQ tweak or small compression change. It is an adjustment based on what you hear, not what the waveform looks like. It will still sound like a normal start. It is still abrupt and loud. Just the harshness is removed. It is a minor volume adjustment and volume adjustments and edits are part of the overall mastering process in my workflow. Besides, you may be working on a mix for an artist that doesn't want a snare smack on "4" -
Last edited by Charlie Fogle; 04/13/16 03:01 AM.
BIAB 2025:RB 2025, Latest builds: Dell Optiplex 7040 Desktop; Windows-10-64 bit, Intel Core i7-6700 3.4GHz CPU and 16 GB Ram Memory.
|
|
|
|
|
|
|
|
|
|
|
|
|
Recording, Mixing, Performance and Production
|
Joined: Feb 2015
Posts: 671
Journeyman
|
|
Journeyman
Joined: Feb 2015
Posts: 671 |
Various ways to do this. After exporting to MP3, I use Wavelab to normalize all volumes to -4 dB (Any DAW will do this). Then I play the normalized files through the PA, making notes on which songs have to come up a dB or two, or down. I revisit those songs and get a more-or-less balanced set of volumes. Nothing worse than having a song jump out at you 6 dB too loud!  Regards, Bob Any reason you export all files to .mp3 before you normalize? I usually normalize .wav file and name it song name(s)_normalized.wav Then create an .mp3.
"When you help somebody else you are really helping yourself"
|
|
|
|
|
|
|
|
|
|
|
|
|
Recording, Mixing, Performance and Production
|
Joined: Feb 2015
Posts: 671
Journeyman
|
|
Journeyman
Joined: Feb 2015
Posts: 671 |
[\quote]
I use specific tools for specific jobs. So as far as WavePad is concerned..... here's what I use it to do:
1. To view the overall wave. I can see if the song is compressed and to what level.
2. To trim the starting count in and the dead air at the end.
3. To normalize the file if it's low.
4. To convert to MP3.
I do not use WavePad to add effects or compression to the file. Since I don't use FX in WavePad nor do I use the FX in Real Band or on realtracks, I really can't answer that question about how they compare. All my FX go in at the DAW level in Sonar.
I think I do have a few of their other products on some of my computers, but I don't use them so again, I can't comment on them.
Like so much of the software I use to do what I do, I use it all in very specific ways and limited ways and in many cases don't even touch the vast majority of it's capabilities. BB is a prime example. I use it to compose and write. I rarely ever use the ACW or so many of it's other features. I enter the chords, select a style and proceed to write the song. It's essentially my scratch pad replacing the old pan and paper I used to use.
This is also true of the NCH software. I don't use a function just because it's there. I use it only if I need it.
Hope that helps and answered your questions.
Nice explanation and workflow Herb
Last edited by dga; 04/14/16 11:17 AM.
"When you help somebody else you are really helping yourself"
|
|
|
|
|
|
|
|
|
|
|
|
|
Recording, Mixing, Performance and Production
|
Joined: Feb 2015
Posts: 671
Journeyman
|
|
Journeyman
Joined: Feb 2015
Posts: 671 |
Hope this info is useful and educational to you.
Sure was Herb Thanks
"When you help somebody else you are really helping yourself"
|
|
|
|
|
|
|
|
|
|
|
|
|
Recording, Mixing, Performance and Production
|
Joined: Feb 2015
Posts: 671
Journeyman
|
|
Journeyman
Joined: Feb 2015
Posts: 671 |
You can't do everything in BIAB, but if you have stereo Wave files or MP3's you can do a lot in Audacity. Download and Install the latest version of Audacity from here http://www.audacityteam.org/download/There are almost 50 effects that will install with this version. What ever common effect you would use in any other DAW is in there. There is a simple AMPLIFY effect (by Audacity) which will change the volume of a stereo mix. Add any amount of DBs or subtract any amount. Save the project, export as .wav or .mpg. Its the simplest way to lower or raise the volume of a recording, and it does not do anything else. If you want check out the other effects all have common names. To display them easily under the effects menu, GO TO Edit Preferences> select Effects from the menu on the left. Use the drop down arrow on the right center and GROUP BY PUBLISHER. This makes the Effects Menu more compact.
Last edited by dga; 04/18/16 05:20 PM.
"When you help somebody else you are really helping yourself"
|
|
|
|
|
|
|
|
|
|
|
|
Ask sales and support questions about Band-in-a-Box using natural language.
ChatPG's knowledge base includes the full Band-in-a-Box User Manual and sales information from the website.
|
|
|
|
|
|
|
|
|
|
|
Band-in-a-Box® 2025 for Mac® users: Build 904 now available!
If you're already using Band-in-a-Box® 2025 for Mac®, make sure to grab the latest update! Build 904 is now available for download and includes the newest additions and enhancements from our team.
Band-in-a-Box® 2026 for Windows® users: Build 1237 is now available!
Already a Band-in-a-Box 2026 for Windows user? Stay up to date and download the build 1237 to get all the latest additions and enhancements.
PowerTracks Pro 2026 for Windows is Here!
PowerTracks 2026 is here—bringing powerful new enhancements designed to make your production workflow faster, smoother, and more intuitive than ever.
The enhanced Mixer now shows Track Type and Instrument icons for instant track recognition, while a new grid option simplifies editing views. Non-floating windows adopt a modern title bar style, replacing the legacy blue bar.
The Master Volume is now applied at the end of the audio chain for consistent levels and full-signal master effects.
Tablature now includes a “Save bends when saving XML” option for improved compatibility with PG Music tools. Plus, you can instantly match all track heights with a simple Ctrl-release after resizing, and Add2 chords from MGU/SGU files are now fully supported... and more!
Get started today—first-time packages start at just $49.
Already using PowerTracks Pro Audio? Upgrade for as little as $29 and enjoy the latest improvements!
Order now!
Band-in-a-Box 2026 for Windows Special Offers End Tomorrow (January 15th, 2026) at 11:59 PM PST!
Time really is running out! Save up to 50% on Band-in-a-Box® 2026 for Windows® upgrades and receive a FREE Bonus PAK—only when you order by 11:59 PM PST on Thursday, January 15, 2026!
We've added many major new features and new content in a redesigned Band-in-a-Box® 2026 for Windows®!
Version 2026 introduces a modernized GUI redesign across the program, with updated toolbars, refreshed windows, smoother workflows, and a new Dark Mode option. There’s also a new side toolbar for quicker access to commonly used windows, and the new Multi-View feature lets you arrange multiple windows as layered panels without overlap, making it easier to customize your workspace.
Another exciting new addition is the new AI-Notes feature, which can transcribe polyphonic audio into MIDI. You can view the results in notation or play them back as MIDI, and choose whether to process an entire track or focus on specific parts like drums, bass, guitars/piano, or vocals. There's over 100 new features in Band-in-a-Box® 2026 for Windows®.
There's an amazing collection of new content too, including 202 RealTracks, new RealStyles, MIDI SuperTracks, Instrumental Studies, “Songs with Vocals” Artist Performance Sets, Playable RealTracks Set 5, two RealDrums Stems sets, XPro Styles PAK 10, Xtra Styles PAK 21, and much more!
Upgrade your Band-in-a-Box for Windows to save up to 50% on most Band-in-a-Box® 2026 upgrade packages!
Plus, when you order your Band-in-a-Box® 2026 upgrade during our special, you'll receive a Free Bonus PAK of exciting new add-ons.
If you need any help deciding which package is the best option for you, just let us know. We are here to help!
Band-in-a-Box® 2026 for Windows® Special Offers Extended Until January 15, 2026!
Good news! You still have time to upgrade to the latest version of Band-in-a-Box® for Windows® and save. Our Band-in-a-Box® 2026 for Windows® special now runs through January 15, 2025!
We've packed Band-in-a-Box® 2026 with major new features, enhancements, and an incredible lineup of new content! The program now sports a sleek, modern GUI redesign across the entire interface, including updated toolbars, refreshed windows, smoother workflows, a new dark mode option, and more. The brand-new side toolbar provides quicker access to key windows, while the new Multi-View feature lets you arrange multiple windows as layered panels without overlap, creating a flexible, clutter-free workspace. We have an amazing new “AI-Notes” feature. This transcribes polyphonic audio into MIDI so you can view it in notation or play it back as MIDI. You can process an entire track (all pitched instruments and drums) or focus on individual parts like drums, bass, guitars/piano, or vocals. There's an amazing collection of new content too, including 202 RealTracks, new RealStyles, MIDI SuperTracks, Instrumental Studies, “Songs with Vocals” Artist Performance Sets, Playable RealTracks Set 5, two RealDrums Stems sets, XPro Styles PAK 10, Xtra Styles PAK 21, and much more!
There are over 100 new features in Band-in-a-Box® 2026 for Windows®.
When you order purchase Band-in-a-Box® 2026 before 11:59 PM PST on January 15th, you'll also receive a Free Bonus PAK packed with exciting new add-ons.
Upgrade to Band-in-a-Box® 2026 for Windows® today! Check out the Band-in-a-Box® packages page for all the purchase options available.
Happy New Year!
Thank you for being part of the Band-in-a-Box® community.
Wishing you and yours a very happy 2026—Happy New Year from all of us at PG Music!
Season's Greetings!
Wishing everyone a happy, healthy holiday season—thanks for being part of our community!
The office will be closed for Christmas Day, but we will be back on Boxing Day (Dec 26th) at 6:00am PST.
Team PG
|
|
|
|
|
|
|
|
|
|
|
|
Forums57
Topics86,026
Posts799,096
Members40,011
| |
Most Online44,367
Mar 4th, 2026
|
|
|
|
|
|
|
|
|
Dansk
Deutsch - Windows
Español
Français - Windows
Italiano - Windows
Nederlands
Polski
Português
Svenskt
русский
Japanese
Simplified Chinese
Traditional Chinese
Korean