It is much easier with Midi instruments. Press the Soloist button, pick your solo, and press the Custom solo mode. There, you can define which bars, choruses,etc. This should also work with RTs.

Another way to have a RT solo (if it is the same instrument throughout the song) is to assign the RT to a part (Strings, Guitar, etc) and use bar settings (F5) to mute/unmute where desired. If you want different instruments and don't have enough parts, you'll probably have to Render the solo to an audio file and merge future parts with that track. It can be done but RealBand would make that easier. You'd pick the bars and RT and generate.

If you want to use BIAB, maybe you could just use RB to generate the desired solo as an audio file and bring that into BIAB.

Hope this helps

Rachael

Last edited by Rachael; 08/26/09 02:20 PM.