@Mario
I'm aware of only changing one thing at a time. But, when updating the drivers the correct procedure requires updating the BIOS, updating the chip set in the computer then applying all the know drivers for the PC. I applied all that would install and ran HP's online scan to determine if there were any new drivers left out. The 2nd scan came up all driver up to date.

Cable situation. I am monitoring the sound from RB and making changes to the levels/effects/pan so I have all of the cables except my headphones unplugged from the unit. Also the pad and phantom power are turned off.

I am creating songs in BIAB with only the headphones attached. I have 2 sets of headphones and when the noise starts I change the headphones just to make sure its not the headphones.

In addition I have 2 usb cables one with and one without a ferite choke both buzz.

@Herb
This computer is 3 months old and thankfully after a couple of very nasty virus attacks of Adds by DNS Unlocker while using McAfee AV 1 year free with the HP ENVY 750-247c purchase (I switched to Avast Internet security professional package) No more AV problems. Yet!

Its windows 10 64 home, i7-6700 @ 3.41GHz intel with 24GB of RAM and 2 disk drives the windows drive is a 128GBSSD the Data Drive is a 2TB 7200 HDD.

I have not had any system problems. Windows loaded takes up 9% of the Physical Memory. Rarely goes above 12 % while in use. When everything else is running BIAB, RB, and sometimes Audacity Task Manager reports CPU stays about 9% Disk is a constant 2% no matter what is running.

Last edited by dga; 06/01/16 06:26 PM.
"When you help somebody else you are really helping yourself"