I like the suggestions by VideoTrack for the additions to the Count-in dialog. And I agree, I don't want to make it so complicated that this becomes hard for PG Music to implement. Having said that, I think it needs to offer something like these checkbox options:
__ Count-in will be played __ Specify numbers of measures for count-in (pulldown) __ First bar has emphasis on every second beat only (multiple bars only) __ Count-in uses beat pattern in this number of measures (pulldown) __ Play count-in when spacebar pressed in measure one
Something along these lines, not that I've provided a complete list. Note: the forum software doesn't seem to allow me to indent. The second checkbox would be indented and grayed out if the first is unchecked etc.
BIAB 2025 Win Audiophile. Software: Studio One 7 Pro, Swam horns, Acoustica-7, Notion 6, Song Master Pro, Win 11 Home. Hardware: Intel i9, 32 Gb; Roland Integra-7, Presonus 192 & Faderport 8, Royer 121, Adam Sub8 & Neumann 120 monitors.
))))) BIG +1 !!!! This seems like such an obvious and relatively easy one to tackle!
Yes, I thought it would be relatively straightforward, but apparently it must have them stumped.
Sigh. Well, we can only wish.
I've been a musician for a very, very long time, but I still can't get used to hearing a 4 beat count-in for a song that starts as a Jazz Waltz. Seems odd to still be doing this in 2016, doesn't it?
BIAB & RB2025 Win.(Audiophile), Sonar Platinum, Cakewalk by Bandlab, Izotope Prod.Bundle, Roland RD-1000, Synthogy Ivory, Kontakt, Focusrite 18i20, KetronSD2, NS40M Monitors, Pioneer Active Monitors, AKG K271 Studio H'phones
I just tested this with 2 different Waltzes in BIAB 2016 (build 127) and it appears to be fixed. Proper 3/4 count-in.
Trevor, can you confirm that this is still broken in the Windows version, or has it been fixed?
Hi Zedd Thanks for the request The problem is that if a song has a mixture of 4/4 and 3/4 time signatures and starts in 3/4, a style with a 4/4 time signature must be chosen.
The first bar is set to play 3 beats. But the count in is in 4/4.
The Count-in that is set from Preferences is Global, not local to a song.
Try this on your system. Download the song and play it. It starts with the first 4 bars as a 3/4 and on the second 4 bars it changes to 4/4. Listen to the count-in, then start playing. Whoa!
BiaB checks the style to determine the count-in to use. All BiaB has to do is check how many beats are in the first bar, and use that as the count-in. Easy? Well, that's what I thought. Apparently this must be quite difficult. 3+ years, stacks of support, not one disapproval, and we're still waiting...
BIAB & RB2025 Win.(Audiophile), Sonar Platinum, Cakewalk by Bandlab, Izotope Prod.Bundle, Roland RD-1000, Synthogy Ivory, Kontakt, Focusrite 18i20, KetronSD2, NS40M Monitors, Pioneer Active Monitors, AKG K271 Studio H'phones
The problem is that if a song has a mixture of 4/4 and 3/4 time signatures and starts in 3/4, a style with a 4/4 time signature must be chosen.
The first bar is set to play 3 beats. But the count in is in 4/4.
I'm so sorry to have troubled you with this. I wanted to +1 this thread, but thought I ought to try it out first to hear what's going on... but I forgot about testing something that had both 3/4 and 4/4 (which was the whole point).
Indeed it's not working, and could easily throw you off if recording or playing along. I wonder why this hasn't been addressed after all this time? It seems as though it should be such a simple thing to remedy.
+1 for fixing this.
Apologies again for my oversight. I read all the posts in this thread, and then proceeded to test the wrong thing like a nitwit.
I'm so sorry to have troubled you with this. I wanted to +1 this thread, but thought I ought to try it out first to hear what's going on... but I forgot about testing something that had both 3/4 and 4/4 (which was the whole point).
Indeed it's not working, and could easily throw you off if recording or playing along. I wonder why this hasn't been addressed after all this time? It seems as though it should be such a simple thing to remedy.
Hey Zedd, no need to apologize at all.
Your post gave me a chance to create a sample of the issue that PG Music staff can now listen to and hear for themselves how problematic it is <hint>.
BIAB & RB2025 Win.(Audiophile), Sonar Platinum, Cakewalk by Bandlab, Izotope Prod.Bundle, Roland RD-1000, Synthogy Ivory, Kontakt, Focusrite 18i20, KetronSD2, NS40M Monitors, Pioneer Active Monitors, AKG K271 Studio H'phones
I'm still leaning to the idea also of making the count-in selectable on a song by song basis, rather than global (it's currently either Off always or On always). Some songs don't need a count-in. Something like this would resolve:
BIAB & RB2025 Win.(Audiophile), Sonar Platinum, Cakewalk by Bandlab, Izotope Prod.Bundle, Roland RD-1000, Synthogy Ivory, Kontakt, Focusrite 18i20, KetronSD2, NS40M Monitors, Pioneer Active Monitors, AKG K271 Studio H'phones
That is a very sensible solution Trevor. That ought to be fairly easy to implement, and seems like an essential addition.
Thanks to you for also lending your support Zedd. Yes, this can't be an impossible challenge, and it is only asking for what a real musician would expect in "real-world" conditions.
So, I'm going out on a limb here. Someone has to. Let's imagine you were in a band, and the band leader supplied a 4 beat count-in but expected you all to start playing 3 beats in the bar. No? I guess you can't imagine that. I certainly can't.
What would someone from PG Music play if they were in that band?
I'm going to keep pushing this, because what happens currently is just fundamentally wrong. This is not about improvement. It is about program "problem resolution" (note: I restrained myself from saying the "B" word, even if that's what it is.)
Imagine if Roland or Yamaha did this with their Arranger Keyboards. Imagine if a 3/4 song on their system started with a 4/4 count-in. No? You can't imagine that? Well, neither can I. If Roland or Yamaha did that you'd probably take it straight back to the shop. But that's exactly what BiaB currently delivers. Is that really musically OK? Think about it.
I have only ever tried to provide support, suggestions for improvement, and positive ideas to PG and his staff, and to offer ideas to better the product. My suggestions are supported not by 'just talk' but by demonstrated "real world examples". I can only hope that someone from PGM is listening. This is too important an issue to walk away from.
If you agree with rectification of product issues, then don't be afraid to lend your support, OK?
We all will benefit (PGM too...).
Trevor
BIAB & RB2025 Win.(Audiophile), Sonar Platinum, Cakewalk by Bandlab, Izotope Prod.Bundle, Roland RD-1000, Synthogy Ivory, Kontakt, Focusrite 18i20, KetronSD2, NS40M Monitors, Pioneer Active Monitors, AKG K271 Studio H'phones
Fixing obvious problems like this (please note that I also haven't pronounced the forbidden "B" word, in order to avoid offending a couple of pgm fanboys here) should be the first priority for PG Music.
I do it the other way. If the song starts in 3/4, I use a 3/4 style, then I select the measure where 4/4 starts and highlight the range of bars and use the set time signature for a range of measures. Then, I chose 4/4 and I'm good to go. I did this with a song where it had one bar in 2/4 and it worked. It took a little effort to for BIAB to figure out to make that one measure 2/4 but it worked.
Computer: Macbook Pro, 16 inch 2021 DAWs: Pro Tools, Logic, and Maschine plays drums, percussion, bass, steel pan, keyboard, music producer/engineer
I do it the other way. If the song starts in 3/4, I use a 3/4 style, then I select the measure where 4/4 starts and highlight the range of bars and use the set time signature for a range of measures. Then, I chose 4/4 and I'm good to go. I did this with a song where it had one bar in 2/4 and it worked. It took a little effort to for BIAB to figure out to make that one measure 2/4 but it worked.
Re:
Quote:
"then I select the measure where 4/4 starts and highlight the range of bars and use the set time signature for a range of measures. Then, I chose 4/4 and I'm good to go"
So I interpret that you are saying that by choosing 4/4 you make a 3/4 style play 4 beats to the bar?
How do you do that? What steps do you use? In my version of BiaB (2016), if you tell a 3/4 style to play 4 beats it plays 3 beats. You can only lose one, not add one.
OK, reading and analyzing further, I'm presuming that you use 2 bars of 2/4 to make something that 'sounds' like one bar of 4/4. If that's the case, then how does the score look? It won't read correctly like one bar of 4/4.
And in any case, I think you've respectfully missed the complete point of these posts. To recap, change your song that has the 3/4 style to start (the first bar) with 2 beats (or 4 beats), then listen to the count-in. I suspect that you'll get 3 beats.
BiaB always plays the count-in based on the selected style, not the number of beats in the first bar. It's a long-term major design issue. I'm really hopeful that it's being resolved. (3,100+ views to date...)
BIAB & RB2025 Win.(Audiophile), Sonar Platinum, Cakewalk by Bandlab, Izotope Prod.Bundle, Roland RD-1000, Synthogy Ivory, Kontakt, Focusrite 18i20, KetronSD2, NS40M Monitors, Pioneer Active Monitors, AKG K271 Studio H'phones
Forever Grateful, BUT, sometimes pissed of. Trygve "Leo" Larsen BiaB 2020, Windows 8.1, Intel Core i5 CPU, 270GHz, 32 Gb RAM My OLD tracks on Soundcloud; https://soundcloud.com/trygve-larsen My NEW is unpublished The Universe = Uni-verse ie one song.
Band-in-a-Box® 2025 pour Windows est disponible en Français.
Le téléchargement se fait à partir du site PG Music
Pour ceux qui auraient déjà acheté la version 2025 de Band-in-a-Box (et qui donc ont une version anglaise), il est possible de "franciser" cette version avec les patchs suivants:
Band-in-a-Box 2025 für Windows Deutsch ist verfügbar!
Die deutsche Version Band-in-a-Box® 2025 für Windows ist ab sofort verfügbar!
Alle die bereits die englische Version von Band-in-a-Box und RealBand 2024 installiert haben, finden hier die Installationsdateien für das Sprachenupdate:
Update Your Band-in-a-Box® 2025 to Build 1128 for Windows Today!
Already using Band-in-a-Box 2025 for Windows®? Download Build 1128 now from our Support Page to enjoy the latest enhancements and improvements from our team.
Already using RealBand® 2025 for Windows®? Download Build 5 now from our Support Page to ensure you have the latest enhancements and improvements from our team.
PowerTracks Pro Audio 2025 is here! This new version introduces many features, including VST3 support, the ability to load or import a .FLAC file, a reset option for track height in the Tracks window, a taller Timeline on the Notation window toolbar, new freeze buttons in the Tracks window, three toolbar modes (two rows, single row, and none), the improved Select Patch dialog with text-based search and numeric patch display, a new button in the DirectX/VST window to copy an effects group, and more!
First-time packages start at only $49. Already a PowerTracks Pro Audio user? Upgrade for as little as $29!
Video: Summary of the New Band-in-a-Box® App for iOS®
Join Tobin as he takes you on a tour of the new Band-in-a-Box® app for iOS®! Designed for musicians, singer-songwriters, and educators, this powerful tool lets you create, play, and transfer songs effortlessly on your iPhone® or iPad®—anytime, anywhere.
One of our representatives will be happy to help you over the phone. Our hours of operation are from
6:00AM to 6:00PM PST (GMT -8) Monday thru Friday, and 8:00AM to 4:00PM PST Saturday. We are closed Sunday. You can also send us your questions via email.
One of our representatives will be happy to help you on our Live Chat or by email. Our hours of operation are from
6:00AM to 6:00PM PST (GMT -8) Monday thru Friday; 8:00AM to 4:00PM PST (GMT -8) Saturday; Closed Sunday.
Dansk
Deutsch - Windows
Español
Français - Windows
Italiano - Windows
Nederlands
Polski
Português
Svenskt
русский
Japanese
Simplified Chinese
Traditional Chinese
Korean