Originally Posted By: 1mansaxband


-ASUS X751S win 10 laptop
-Yamaha 408i PA
-Yorkville YX10P powered monitor
-Scarlett 2i2 1st gen

I use a Instrument mic on ch 1 using mixer phantom power on ch 4 I have a dynamic mic. I am going to start a new topic to continue finding a solution to my issues. "Latency and static noise issues"




latency and "static" type noises...pops, clicks, drops and scratching are classic symptoms of using either the wrong driver such as MME or not having your ASIO settings properly adjusted.

A laptop's built in sound chip is not a good option in the world of multitrack recording. Be sure you have the ASIO driver installed for the 2i2. Then it's a matter of adjusting the latency and buffers until you get a reasonably good playback.

Some folks have to have settings for recording and another for playback. Hopefully, you can do as I did and find a nice middle ground which works for all situations and gives low latency under 5ms or so. 10ms is about as high as you really want to see.


You can find my music at:
www.herbhartley.com
Add nothing that adds nothing to the music.
You can make excuses or you can make progress but not both.

The magic you are looking for is in the work you are avoiding.