Just reinstalled BIAB 2011.5 on my new laptop (win 10 Home). I've use Kontakt 5 and other plugins regularly with BIAB.
I immediately noticed that when I click the Plugin or Vsti Synth buttons I'm not getting the window that shows the Multiple Instruments like I used to. I'm only seeing a window that says: " VST/DirectX Instruments/Plugins " only two tabs synth track & audio track. No list of instruments on left side of window like before.
Help.... lol
Thanks In Advance Guys!
Last edited by Bomberomusician; 12/18/1603:03 AM.
HP 17 2.5GHz seventh-generation AMD A12-9700P quad-core accelerated processor 2TB 5400 RPM SATA hard drive 12GB DDR4 SDRAM Windows 10 Home (64bit) w/DTS Audio
One showing the instruments/channels ( like I used to have )
Thank You.
Last edited by Bomberomusician; 12/18/1603:13 AM.
HP 17 2.5GHz seventh-generation AMD A12-9700P quad-core accelerated processor 2TB 5400 RPM SATA hard drive 12GB DDR4 SDRAM Windows 10 Home (64bit) w/DTS Audio
Since the problem is due to a new installation of BIAB 2011.5 on a Windows 10 computer, here are some things that I'd try...
1. Make sure that you have the latest build for BIAB 2011.5 installed. This is found at the below link. It looks as though the last update for the 2011.5 version of the program was build #329. (If you haven't yet installed this, download it and run the update. When the update installation gives the program paths, double-check that they are correct.)
2. Under your midi driver set up (Options | Prefs | MIDI Driver), make sure that you have a VST/DXi synth installed. To do this, have a look at the image below that I've labelled "VST/DXi synth set up"...
Select Microsoft GS Wavetable synth (#1).
Make sure that the VST/DXi checkboxes (#2) are active.
Select a softsynth (#3). I have the old Roland VSC DXi synth selected on the image. You choices will probably be different (Maybe Coyote Forte DXi, Coyote WT, etc.)
3. When I had a close look at the two images you posted, I noticed that the Windows 10 installation has scroll bars (see second image below). This is a Windows thing. If you use these scroll bars, are the missing options revealed? If so, it might be possible to resize the VST/DXi window.
Thanks for your in detail response Noel. I did everything you recommended,but still a no go. The scroll bars you referenced were hiding the ForteDXI table/patches
HP 17 2.5GHz seventh-generation AMD A12-9700P quad-core accelerated processor 2TB 5400 RPM SATA hard drive 12GB DDR4 SDRAM Windows 10 Home (64bit) w/DTS Audio
Here ya go. I did one of what I see immediately after going into midi/audio set up, (bottom photo)
and then the screen I get when I clicked on your #3. ( top photo )
Thanks
Last edited by Bomberomusician; 12/18/1606:50 AM.
HP 17 2.5GHz seventh-generation AMD A12-9700P quad-core accelerated processor 2TB 5400 RPM SATA hard drive 12GB DDR4 SDRAM Windows 10 Home (64bit) w/DTS Audio
Here is what I used to have: ( notice the green square says: VST/DX Synth Plugins ) verses what I'm seeing now ( VST/DirectX Instruments/Plugins ) two totally different titles.....
Thanks
HP 17 2.5GHz seventh-generation AMD A12-9700P quad-core accelerated processor 2TB 5400 RPM SATA hard drive 12GB DDR4 SDRAM Windows 10 Home (64bit) w/DTS Audio
This is indeed perplexing because, as you say, you don't have the option of assigning synths to the Piano, Bass, Guitar, etc., tracks.
When BIAB stops doing what it usually does, I nearly always interpret that as a sign that a factory reset is worth considering.
With this in mind, I suggest the following (this is ultimate form of factory reset)...
1. Close BIAB
2. Go to the \bb folder and rename "intrface.bbw" and "mysetup.dk" to something like "intrface.bbw.old" and "mysetup.dk.old". (NOTE the spelling of 'intrface.bbw', there's no 'e'.)
3. Restart BIAB.
4. Renaming the above effectively removes them from BIAB's gaze and forces the program to create new files.
5. After the above, you'll need to set your midi and audio drivers up again. This includes setting the VST/DXi driver.
Noel, I've done that and it installs Kontakt or whatever but it plays over all tracks..... not the separate tracks as before. Let's say I install Kontakt Acoustic Piano. All tracks play the Kontakt plugin.... bass = piano, piano = piano, guitar = piano, melody = piano.....
understand ?
HP 17 2.5GHz seventh-generation AMD A12-9700P quad-core accelerated processor 2TB 5400 RPM SATA hard drive 12GB DDR4 SDRAM Windows 10 Home (64bit) w/DTS Audio
HP 17 2.5GHz seventh-generation AMD A12-9700P quad-core accelerated processor 2TB 5400 RPM SATA hard drive 12GB DDR4 SDRAM Windows 10 Home (64bit) w/DTS Audio
Noel, I've done that and it installs Kontakt or whatever but it plays over all tracks..... not the separate tracks as before. Let's say I install Kontakt Acoustic Piano. All tracks play the Kontakt plugin.... bass = piano, piano = piano, guitar = piano, melody = piano.....
understand ?
One more shot. You have to install a GM synth in the "default"/ first slot. Otherwise all midi tracks will play the same Kontakt sound. In current BIAB you can assign individual Kontakt sounds to each of the individual instruments to supersede individual sounds. You say it used to work?
Ok, I'm back. Did the renaming the files above that Noel recommended. Still no go. Also, I have the GM Synth in "default" block.
Yes Musicstudent ,this was no problem in windows 7. I regularly used multiple vst back then. I'm starting to think that maybe I had BIAB 2012.5 instead of 2011.5. Would this make a difference?
Is there a way to find out if and when/ what version of BIAB went to supporting multiple vst / on different tracks/channels ?
Thanks Guys
Last edited by Bomberomusician; 12/18/1602:14 PM.
HP 17 2.5GHz seventh-generation AMD A12-9700P quad-core accelerated processor 2TB 5400 RPM SATA hard drive 12GB DDR4 SDRAM Windows 10 Home (64bit) w/DTS Audio
I've just had a look back through past manuals and upgrade manuals.
The top image below is taken from the 2011.5 manual. How I interpret it is that it shows that a VST/DXi synth can only be added as a one-off instance. It's not possible to add softsynths to each track.
The lower image below shows the VST/DXi synth setup that first appeared in the BIAB 2012 upgrade manual. This suggests that the ability to add to synth to individual BIAB tracks was first available in version 2012.
When considering this information in light of all the above posts, it seems as if you have been using at least BIAB 2012 on your other computer. (That's the only way I can make sense of all that's been discussed.)
I believe you are absolutely right Noel. I do believe now that I had upgraded from 2011.5 to 2012.5 back then.
wow..... Just checked my email and Mathew @ PG Music has made available to me again my upgrades that I had before that took me up to 2012.5.
THANKS MATHEW,NOEL & Musicstudent for all your help.
Sorry for wasting all of your brain power and precious time on this wild goose chase of mine.
At least we learned that BIAB didn't support multiple vst plugins until version 2012.5.
Last edited by Bomberomusician; 12/20/1605:46 AM.
HP 17 2.5GHz seventh-generation AMD A12-9700P quad-core accelerated processor 2TB 5400 RPM SATA hard drive 12GB DDR4 SDRAM Windows 10 Home (64bit) w/DTS Audio
User Video: Band-in-a-Box® + ChatGPT = Impressed the BOSS!
Since AI is now readily available online as a resource for many things, we recently put together and shared a video where we demonstrated how to create a song using Band-in-a-Box®, ChatGPT, and Synth V; we've also shared a Bob Doyle Media video, Convert MIDI Chords into AI Vocal Harmonies with ACE Studio and Band in A Box, showing how they utilize AI for their song projects. Now it's time to share Henry's video, Band-in-a-Box + ChatGPT = Impressed the BOSS!, where he demonstrates how to use ChatGPT and Band-in-a-Box to whip a song project together in only 3-4 hours.
Visit Henry Clarke's YouTube Channel, Henry Clarke - Senior Musicians Unite, to find a large collection of tutorials showing the viewer how to achieve amazing results using Band-in-a-Box®!
If you've reviewed our Support page, you've probably noticed the Videos page, which separates our Band-in-a-Box® tutorial videos by category: Overview, VST DAW Plugin, Setup, Beginner, Intermediate, Advanced, and there's even an Archive category to go down memory lane... (You'll also find these videos on our YouTube Channel.)
Ci siamo dati da fare e abbiamo aggiunto oltre 50 nuove funzionalità e una straordinaria raccolta di nuovi contenuti, tra cui 222 RealTracks, nuovi RealStyles, MIDI SuperTracks, Instrumental Studies, "Songs with Vocals" Artist Performance Sets, Playable RealTracks Set 3, Playable RealDrums Set 2, due nuovi set di "RealDrums Stems", XPro Styles PAK 6, Xtra Styles PAK 17 e altro ancora!
Band-in-a-Box® 2024 apporte plus de 50 fonctions nouvelles ainsi qu'une importante de contenus nouveaux à savoir : 222 RealTracks, des RealStyles nouveaux, des SuperTracks MIDI, des Etudes d'Instruments, des Prestations d'Artistes, des "Morceaux avec Choeurs", un Set 3 de Tracks Jouables, un Set 2 de RealDrums Jouables, deux nouveaux Sets de "RealDrums Stems", des Styles XPro PAK 6, des Xtra Styles PAK 17 et bien plus encore!
Video: Making a Song with Band-in-a-Box®, ChatGPT, and Synth V
Take your Band-in-a-Box® project to a whole new level when you incorporate ChatGPT and Synth V to add lyrics and vocals to your song!
We wanted to demonstrate how this is done with our video, where we show you how to go from nothing to a finished "radio ready" modern pop song by combining the features of Band-in-a-Box®, ChatGPT, and Synth V!
User Video: Convert MIDI Chords into AI Vocal Harmonies with ACE Studio and Band-in-a-Box®
The Bob Doyle Media YouTube channel is known for demonstrating how you can creatively incorporate AI into your projects - from your song projects to avatar building to face swapping, and more!
His latest video, Convert MIDI Chords into AI Vocal Harmonies with ACE Studio and Band-in-a-Box, he explains in detail how you can use the Melodist feature in Band-in-a-Box with ACE Studio. Follow along as he goes from "nothing" to "something" with his Band-in-a-Box MIDI Melodist track, using ACE Studio to turn it into a vocal track (or tracks, you'll see) by adding lyrics for those notes that will trigger some amazing AI vocals!
One of our representatives will be happy to help you over the phone. Our hours of operation are from
6:00AM to 6:00PM PST (GMT -8) Monday thru Friday, and 8:00AM to 4:00PM PST Saturday. We are closed Sunday. You can also send us your questions via email.
One of our representatives will be happy to help you on our Live Chat or by email. Our hours of operation are from
6:00AM to 6:00PM PST (GMT -8) Monday thru Friday; 8:00AM to 4:00PM PST (GMT -8) Saturday; Closed Sunday.