I had a weird problem tonight.
I installed RB 2016 build 10 on the studio system Saturday.
Generated some stuff, seemed fine. All tracks played in time.

Tried recording a band tonight, and the tracks were not lining up correctly when I hit 'Stop-Keep Take'. Some tracks were just randomly not in time.

So I changed the Temp Audio Directory to another drive.
Tried again, same problem.

So then I tried using the external hard dive to run it (RB 2016 build 3) .. same problem.
I also noticed a yellow message; Error creating Wave Header (or similar)

I eventually went back to running PT 12 from a different drive and had success, but this was a weird night. 2016 has been pretty stable on machine 'A', but on machine 'B' it seemed to wreak havoc tonight.
I'm usually pretty good with making RB/PT behave, but tonight was a challenge.

We were trying to record 8 tracks at a time using a Delta 1010 (if that makes a difference)
I also noticed the video seemed to be struggling while the failed recordings were taking place. VU would lag, screen draw seemed 'off'.
Guess I could check for video driver updates on that system, but this was the first time in many years I have had RB misbehave and couldn't solve it without just reverting back to a very old 'fail safe' version to keep getting work done.

It's a 'newer' system with lots of free space and RAM.
Tried rebooting, re-installing .. couldn't get RB 2016 to run with either build 3 or 10.
PT 12 ran like a champ, and saved the day, but thought I'd mention it in case anyone has any suggestions.

I do not work here, but the benefits are still awesome
Make your sound your own!